www.pudn.com > httpd-2.2.6-win32-src-r2.zip > buildconf, change:2006-07-11,size:5983b


#!/bin/sh 
# 
# Licensed to the Apache Software Foundation (ASF) under one or more 
# contributor license agreements.  See the NOTICE file distributed with 
# this work for additional information regarding copyright ownership. 
# The ASF licenses this file to You under the Apache License, Version 2.0 
# (the "License"); you may not use this file except in compliance with 
# the License.  You may obtain a copy of the License at 
# 
#     http://www.apache.org/licenses/LICENSE-2.0 
# 
# Unless required by applicable law or agreed to in writing, software 
# distributed under the License is distributed on an "AS IS" BASIS, 
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
# See the License for the specific language governing permissions and 
# limitations under the License. 
# 
# 
# buildconf: Build the support scripts needed to compile from a 
#            checked-out version of the source code. 
 
# set a couple of defaults for where we should be looking for our support libs. 
# can be overridden with --with-apr=[dir] and --with-apr-util=[dir] 
 
apr_src_dir="srclib/apr ../apr" 
apu_src_dir="srclib/apr-util ../apr-util" 
 
while test $# -gt 0  
do 
  # Normalize 
  case "$1" in 
  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;; 
  *) optarg= ;; 
  esac 
 
  case "$1" in 
  --with-apr=*) 
  apr_src_dir=$optarg 
  ;; 
  esac 
 
  case "$1" in 
  --with-apr-util=*) 
  apu_src_dir=$optarg 
  ;; 
  esac 
 
  shift 
done 
 
# 
# Check to be sure that we have the srclib dependencies checked-out 
# 
 
should_exit=0 
apr_found=0 
apu_found=0 
 
for dir in $apr_src_dir 
do 
    if [ -f "${dir}/build/apr_common.m4" ]; then 
        echo "found apr source: ${dir}" 
        apr_src_dir=$dir 
        apr_found=1 
        break 
    fi 
done 
 
if [ $apr_found -lt 1 ]; then 
    echo "" 
    echo "You don't have a copy of the apr source in srclib/apr. " 
    echo "Please get the source using the following instructions,"  
    echo "or specify the location of the source with "  
    echo "--with-apr=[path to apr] :" 
    echo "" 
    echo "   svn co http://svn.apache.org/repos/asf/apr/apr/trunk srclib/apr" 
    echo "" 
    should_exit=1 
fi 
 
for dir in $apu_src_dir 
do 
    if [ -f "${dir}/Makefile.in" ]; then 
        echo "found apr-util source: ${dir}" 
        apu_src_dir=$dir 
        apu_found=1 
        break 
    fi 
done 
 
if [ $apu_found -lt 1 ]; then 
    echo "" 
    echo "You don't have a copy of the apr-util source in srclib/apr-util. " 
    echo "Please get one the source using the following instructions, " 
    echo "or specify the location of the source with " 
    echo "--with-apr-util=[path to apr-util]:" 
    echo "" 
    echo "   svn co http://svn.apache.org/repos/asf/apr/apr-util/trunk srclib/apr-util" 
    echo "" 
    should_exit=1 
fi 
 
if [ $should_exit -gt 0 ]; then 
    exit 1 
fi 
 
# These are temporary until Roy finishes the other build changes 
# 
touch .deps 
rm -f aclocal.m4 
rm -f generated_lists 
rm -f srclib/pcre/aclocal.m4 
 
# Remove autoconf 2.5x cache directories 
rm -rf autom4te*.cache srclib/pcre/autom4te*.cache 
 
case "`uname`" in 
*BSD/OS*) 
    ./build/bsd_makefile;; 
esac 
# 
# end temporary stuff 
 
apr_configure="$apr_src_dir/configure" 
aprutil_configure="$apu_src_dir/configure" 
pcre_configure="srclib/pcre/configure" 
config_h_in="include/ap_config_auto.h.in" 
 
cross_compile_warning="warning: AC_TRY_RUN called without default to allow cross compiling" 
 
if [ "$apr_src_dir" = "srclib/apr" ]; then 
    echo rebuilding $apr_configure 
    (cd srclib/apr && ./buildconf) || { 
        echo "./buildconf failed for apr" 
        exit 1 
    } 
    rm -f srclib/apr/apr.spec 
fi 
 
apr_src_dir=`cd $apr_src_dir && pwd`  
 
if [ "$apu_src_dir" = "srclib/apr-util" ]; then 
    echo rebuilding $aprutil_configure 
    (cd srclib/apr-util && ./buildconf --with-apr=$apr_src_dir) || { 
        echo "./buildconf failed for apr-util"  
        exit 1 
    } 
    rm -f srclib/apr-util/apr-util.spec 
fi 
 
apu_src_dir=`cd $apu_src_dir && pwd`  
 
echo copying build files 
cp $apr_src_dir/build/config.guess $apr_src_dir/build/config.sub \ 
   $apr_src_dir/build/PrintPath $apr_src_dir/build/apr_common.m4 \ 
   $apr_src_dir/build/find_apr.m4 $apu_src_dir/build/find_apu.m4 build 
 
# Remove any libtool files so one can switch between libtool 1.3 
# and libtool 1.4 by simply rerunning the buildconf script. 
(cd build ; rm -f ltconfig ltmain.sh) 
 
# Optionally copy libtool-1.3.x files 
if [ -f $apr_src_dir/build/ltconfig ]; then 
    cp $apr_src_dir/build/ltconfig build 
fi 
if [ -f $apr_src_dir/build/ltmain.sh ]; then 
    cp $apr_src_dir/build/ltmain.sh build 
fi 
 
echo rebuilding $pcre_configure 
(cd srclib/pcre && ${AUTOCONF:-autoconf}) 
 
echo rebuilding $config_h_in 
rm -f $config_h_in 
${AUTOHEADER:-autoheader} 2>&1 | grep -v "$cross_compile_warning" 
 
echo rebuilding configure 
rm -f config.cache 
${AUTOCONF:-autoconf} 2>&1 | grep -v "$cross_compile_warning" 
 
# Remove autoconf 2.5x cache directories 
rm -rf autom4te*.cache srclib/pcre/autom4te*.cache 
 
if [ -f `which cut` ]; then 
  echo rebuilding rpm spec file 
  ( VMMN=`build/get-version.sh mmn include/ap_mmn.h MODULE_MAGIC_NUMBER` 
    REVISION=`build/get-version.sh all include/ap_release.h AP_SERVER` 
    VERSION=`echo $REVISION | cut -d- -s -f1` 
    RELEASE=`echo $REVISION | cut -d- -s -f2` 
    if [ "x$VERSION" = "x" ]; then 
      VERSION=$REVISION 
      RELEASE=1 
    fi 
    cat ./build/rpm/httpd.spec.in | \ 
    sed -e "s/APACHE_VERSION/$VERSION/" \ 
        -e "s/APACHE_RELEASE/$RELEASE/" \ 
        -e "s/APACHE_MMN/$VMMN/" \ 
    > httpd.spec ) 
fi 
 
# ensure that the mod_ssl expression parser sources are never regenerated 
# when running make 
echo fixing timestamps for mod_ssl sources 
cd modules/ssl 
touch ssl_expr_parse.y 
sleep 1 
touch ssl_expr_parse.c ssl_expr_parse.h ssl_expr_scan.l 
sleep 1 
touch ssl_expr_scan.c 
cd ../.. 
 
exit 0