www.pudn.com > httpd-2.2.6-win32-src-r2.zip > install-bindist.sh.in, change:2006-07-11,size:5274b


#!/bin/sh 
# 
# Licensed to the Apache Software Foundation (ASF) under one or more 
# contributor license agreements.  See the NOTICE file distributed with 
# this work for additional information regarding copyright ownership. 
# The ASF licenses this file to You under the Apache License, Version 2.0 
# (the "License"); you may not use this file except in compliance with 
# the License.  You may obtain a copy of the License at 
# 
#     http://www.apache.org/licenses/LICENSE-2.0 
# 
# Unless required by applicable law or agreed to in writing, software 
# distributed under the License is distributed on an "AS IS" BASIS, 
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
# See the License for the specific language governing permissions and 
# limitations under the License. 
# 
# 
# Usage: install-bindist.sh [ServerRoot] 
# This script installs the Apache binary distribution and 
# was automatically created by binbuild.sh. 
  
lmkdir() 
{ 
  path="" 
  dirs=`echo $1 | sed -e 's%/% %g'` 
  mode=$2 
  
  set -- ${dirs} 
  
  for d in ${dirs} 
  do 
    path="${path}/$d" 
    if test ! -d "${path}" ; then 
      mkdir ${path} 
      if test $? -ne 0 ; then 
        echo "Failed to create directory: ${path}" 
        exit 1 
      fi 
      chmod ${mode} ${path} 
    fi 
  done 
} 
  
lcopy() 
{ 
  from=$1 
  to=$2 
  dmode=$3 
  fmode=$4 
  
  test -d ${to} || lmkdir ${to} ${dmode} 
  (cd ${from} && tar -cf - *) | (cd ${to} && tar -xf -) 
  
  if test "X${fmode}" != X ; then 
    find ${to} -type f -print | xargs chmod ${fmode} 
  fi 
  if test "X${dmode}" != X ; then 
    find ${to} -type d -print | xargs chmod ${dmode} 
  fi 
} 
  
## 
##  determine path to (optional) Perl interpreter 
## 
PERL=no-perl5-on-this-system 
perls='perl5 perl' 
path=`echo $PATH | sed -e 's/:/ /g'` 
found_perl=0 
  
for dir in ${path} ;  do 
  for pperl in ${perls} ; do 
    if test -f "${dir}/${pperl}" ; then 
      if `${dir}/${pperl} -v >/dev/null 2>&1` ; then 
        PERL="${dir}/${pperl}" 
        found_perl=1 
        break 
      fi 
    fi 
  done 
  if test $found_perl = 1 ; then 
    break 
  fi 
done 
  
if [ .$1 = . ] 
then 
  SR=@default_dir@ 
else 
  SR=$1 
fi 
echo "Installing binary distribution for platform @os@" 
echo "into directory $SR ..." 
lmkdir $SR 755 
lmkdir $SR/proxy 750 
lmkdir $SR/logs 755 
lmkdir $SR/build 755 
lcopy bindist/build $SR/build 750 750 
lcopy bindist/man $SR/man 755 644 
if [ -d bindist/modules ] 
then 
  lcopy bindist/modules $SR/modules 750 750 
fi 
lcopy bindist/include $SR/include 755 644 
lcopy bindist/icons $SR/icons 755 644 
lcopy bindist/manual $SR/manual 755 644 
lcopy bindist/cgi-bin $SR/cgi-bin 750 750 
if [ -f $SR/bin/envvars ] 
then 
  echo "[Preserving existing envvars settings.]" 
  cp -p $SR/bin/envvars ./envvars.orig 
  HAD_ENVVARS=yes 
else 
  HAD_ENVVARS=no 
fi 
lcopy bindist/bin $SR/bin 750 750 
if [ $HAD_ENVVARS = yes ] 
then 
  cp -p ./envvars.orig $SR/bin/envvars 
  rm ./envvars.orig 
fi 
lcopy bindist/lib $SR/lib 750 750 
if [ -d $SR/conf ] 
then 
  echo "[Preserving existing configuration files.]" 
  cp bindist/conf/*-std.conf $SR/conf/ 
else 
  lcopy bindist/conf $SR/conf 750 640 
  sed -e "s%@default_dir@%$SR%" $SR/conf/httpd-std.conf > $SR/conf/httpd.conf 
fi 
if [ -d $SR/htdocs ] 
then 
  echo "[Preserving existing htdocs directory.]" 
else 
  lcopy bindist/htdocs $SR/htdocs 755 644 
fi 
if [ -d $SR/error ] 
then 
  echo "[Preserving existing error documents directory.]" 
else 
  lcopy bindist/error $SR/error 755 644 
fi 
  
sed -e "s;^#!\@perlbin\@.*;#!$PERL;" -e "s;\@exp_installbuilddir\@;$SR/build;" \ 
	support/apxs.in > $SR/bin/apxs 
PRE=`grep "^prefix = " bindist/build/config_vars.mk` 
PRE=`echo $PRE | sed -e "s;prefix = ;;"` 
sed -e "s;$PRE;$SR;" bindist/build/config_vars.mk > $SR/build/config_vars.mk 
sed -e "s;^#!/.*;#!$PERL;" bindist/bin/dbmmanage > $SR/bin/dbmmanage 
sed -e "s%@default_dir@%$SR%" \ 
        -e "s%^HTTPD=.*$%HTTPD=\"$SR/bin/httpd -d $SR\"%" bindist/bin/apachectl > $SR/bin/apachectl 
sed -e "s%@default_dir@%$SR%" \ 
        bindist/bin/envvars-std > $SR/bin/envvars-std 
if [ $HAD_ENVVARS = no ] 
then 
    cp -p $SR/bin/envvars-std $SR/bin/envvars 
fi 
  
echo "Ready." 
echo " +--------------------------------------------------------+" 
echo " | You now have successfully installed the Apache @ver@  |" 
echo " | HTTP server. To verify that Apache actually works      |" 
echo " | correctly you should first check the (initially        |" 
echo " | created or preserved) configuration files:             |" 
echo " |                                                        |" 
echo " |   $SR/conf/httpd.conf" 
echo " |                                                        |" 
echo " | You should then be able to immediately fire up         |" 
echo " | Apache the first time by running:                      |" 
echo " |                                                        |" 
echo " |   $SR/bin/apachectl start " 
echo " |                                                        |" 
echo " | Thanks for using Apache.       The Apache Group        |" 
echo " |                                http://www.apache.org/  |" 
echo " +--------------------------------------------------------+" 
echo " "