www.pudn.com > FlashTool_src_v2.9.1006.zip > frm_FormatOption.h


/****************************************************************************** 
 *  Copyright Statement: 
 *  -------------------- 
 *  This software is protected by Copyright and the information contained 
 *  herein is confidential. The software may not be copied and the information 
 *  contained herein may not be used or disclosed except with the written 
 *  permission of MediaTek Inc. (C) 2002 
 * 
 *****************************************************************************/ 
 
/******************************************************************************* 
 * Filename: 
 * --------- 
 *  frm_FormatOption.h 
 * 
 * Project: 
 * -------- 
 *  Flash tool set 
 * 
 * Description: 
 * ------------ 
 *  Form of format option 
 * 
 * Author: 
 * ------- 
 *  Amos Hsu (mtk00539) 
 * 
 *============================================================================== 
 *           HISTORY 
 * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!! 
 *------------------------------------------------------------------------------ 
 * $Revision:   1.7  $ 
 * $Modtime:   Dec 15 2005 08:44:58  $ 
 * $Log:   //mtkvs01/vmdata/flash_tool/archives/frm_FormatOption.h-arc  $ 
 *  
 *    Rev 1.7   Dec 29 2005 10:57:24   mtk00539 
 *  1. [FlashTool] Add download history feature. 
 * Resolution for 156: [FlashTool v2.7.1013][BUG FIX] Fix BootROM start command failure while manually selecting NMT6226 or MT6227 baseband chip. 
 *  
 *    Rev 1.6   Oct 19 2005 14:47:24   mtk00539 
 *  1. [FlashTool][New] Adapt new BROM_DLL&DA v2.7.1008.  
 * Resolution for 141: [FlashTool v2.7.1008][New] Support NFB download and many new features. 
 *  
 *    Rev 1.5   May 24 2005 20:03:38   mtk00539 
 *  1. [FlashTool][New] Reset FAT to factory default setting.  
 *  2. [FlashTool][New] Option to enable/disable resource project id comparison.  
 * Resolution for 116: [FlashTool v2.6.1012][New] Reset FAT to factory default setting. 
 *  
 *    Rev 1.4   Jun 16 2004 16:38:32   mtk00539 
 *  1. [FlashTool][Enhance] Re-org format option panel to prevent users confused. 
 *  2. [FlashTool][Enhance] Do not close OK window when operation is done. 
 * Resolution for 78: [FlashTool v2.5.1013][Enhance] Re-org format option panel to prevent users confused. 
 *  
 *    Rev 1.3   May 14 2004 17:04:20   mtk00539 
 *  1. [FlashTool][New] add CTRL+ALT+O hot-key to toggle Advanced Option Mode. 
 *  2. [FlashTool][New] add FAT auto format mechanism. 
 *  3. [FlashTool][New] add DA auto selection mechanism. 
 *  4. [FlashTool][New] add STOP button. 
 *  5. [FlashTool][Enhance] start timer when BootROM start cmd pass. 
 *  6. [FlashTool][New] display flash info in status bar hint. 
 *  7. [FlashTool][New] display format range info in format progress bar hint. 
 *  8. [FlashTool][New] record the DA, Scatter and DL path separately. 
 * Resolution for 68: [FlashTool v2.5.1009][New] add FAT auto format, DA auto selection mechanism and lots of enhancements. 
 *  
 *    Rev 1.2   Jun 30 2003 19:19:36   mtk00539 
 *  1. [FlashTool][Add Features] Split flashtool function into brom.dll 
 *  2. [FlashTool][Add Features] Format function: users can format any range you want without downloading procedure. 
 *  3. [FlashTool][Add Features] Report format percentage. 
 *  4. [FlashTool][Add Features] Check format range. 
 *  5. [FlashTool][Add Features] Merge FlashTool for Pluto version. 
 *  6. [FlashTool][Add Features] Runtime debug log: you can press (CTRL+ALT+T) to enable/disable debug log whenever you want. 
 *  7. [FlashTool][Add Features] Forcedly Stop hot-key: you can forcedly stop FlashTool by pressing CTRL+Z. 
 *  8. [FlashTool][BUG FIXED] Fix FlashTool MEM_CMD end_addr bug, FlashTool should use (begin_addr+length-1) as end_addr. 
 * Resolution for 11: [FlashTool v2.3.1001][New Version] Split flashtool function into brom.dll 
 *  
 *    Rev 1.1   Jun 03 2003 22:24:54   mtk00539 
 * 1. extend timeout to 10 sec for large image download in boot_2.cpp 
 * 2. disable unnecesssary debug hot-key. 
 * 3. add shift+ctrl+A for Jensen's DA debug tool kit. 
 * 4. enable build number, and start from 1003. 
 * 5. save baseband chip type, mcu frequency and auto-memory wait state setup flag to ini file. 
 * 6. add DA_SET_REG_CMD command and remove FINISH_CMD, so that release power key could be issued from FlashTool, not hardcoded in DA. 
 * 7. add DA_MCU_FREQ_CMD command, so that we don't have to select different DA while switching frequency. 
 * 8. add new flash MB84VD23280FA-70 for Chicago project. 
 * 9. remove DEVICE_CMD, DA will check flash automatically and report the flash type to PC. 
 * 10. add DA_FORMAT_CMD command to support range format. 
 * 11. display flash type on FlashTool. 
 * 12. merge the DOWNLOAD.H header file, both FlashTool and DA will use the same header file. 
 * 13. modify SPEED_CMD handshake by adding a sync mechanism to detect whether if the speed change is done by both sides. 
 * Resolution for 7: [FlashTool v2.2.1003][AddFeature] Enhanced for KLM and Chicago project. 
 * 
 *------------------------------------------------------------------------------ 
 * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!! 
 *============================================================================== 
 *******************************************************************************/ 
 
//--------------------------------------------------------------------------- 
 
#ifndef frm_FormatOptionH 
#define frm_FormatOptionH 
//--------------------------------------------------------------------------- 
#include  
#include  
#include  
#include  
#include  
//--------------------------------------------------------------------------- 
class TFormatOption : public TForm 
{ 
__published:	// IDE-managed Components 
	TLabeledEdit *FormatStartAddr; 
	TLabeledEdit *FormatLength; 
	TButton *btn_FormatOK; 
	TButton *btn_FormatCancel; 
	TLabel *Label1; 
	TLabel *Label2; 
	TGroupBox *GroupBox1; 
	TRadioButton *m_Radio_AutoFormat; 
	TPanel *m_Panel_AutoFormat2; 
	TPanel *m_Panel_AutoFormat1; 
	TPanel *m_Panel_ManualFormat1; 
	TRadioButton *m_Radio_ManualFormat; 
	TPanel *m_Panel_ManualFormat2; 
	TRadioButton *m_Radio_DisableFormat; 
	TPanel *m_Panel_DisableFormat2; 
	TLabel *Label3; 
	TPanel *m_Panel_DisableFormat1; 
	TLabel *Label4; 
    TPanel *m_Panel_ResetToFactoryDefault1; 
    TRadioButton *m_Radio_ResetToFactoryDefault; 
    TPanel *m_Panel_ResetToFactoryDefault2; 
    TLabel *Label5; 
    TLabel *Label6; 
    TLabel *Label7; 
    TLabel *Label8; 
    TRadioGroup *m_Group_EraseFlag; 
    TCheckBox *m_FormatValidation; 
    TLabel *Label9; 
	void __fastcall btn_FormatOKClick(TObject *Sender); 
	void __fastcall btn_FormatCancelClick(TObject *Sender); 
	void __fastcall OnShow(TObject *Sender); 
	void __fastcall m_Radio_ManualFormatClick(TObject *Sender); 
	void __fastcall m_Radio_AutoFormatClick(TObject *Sender); 
	void __fastcall m_Radio_DisableFormatClick(TObject *Sender); 
	void __fastcall FormClose(TObject *Sender, TCloseAction &Action); 
	void __fastcall Hide(); 
    void __fastcall m_Radio_ResetToFactoryDefaultClick(TObject *Sender); 
    void __fastcall m_FormatValidationClick(TObject *Sender); 
private:	// User declarations 
	unsigned int m_Original_GroupBox_Height; 
	unsigned int m_Original_Form_Height; 
	unsigned int m_Original_Panel_ManualFormat1_Top; 
	unsigned int m_Original_Panel_ManualFormat2_Top; 
    unsigned int m_Original_Panel_ManualFormat2_Height; 
	unsigned int m_Original_Panel_ResetToFactoryDefault1_Top; 
	unsigned int m_Original_Panel_ResetToFactoryDefault2_Top; 
public:		// User declarations 
    bool	bCallFromFormatButton; 
	__fastcall TFormatOption(TComponent* Owner); 
}; 
//--------------------------------------------------------------------------- 
extern PACKAGE TFormatOption *FormatOption; 
//--------------------------------------------------------------------------- 
#endif