www.pudn.com > FlashTool_src_v2.9.1006.zip > Flash_tool.cpp
/***************************************************************************** * Copyright Statement: * -------------------- * This software is protected by Copyright and the information contained * herein is confidential. The software may not be copied and the information * contained herein may not be used or disclosed except with the written * permission of MediaTek Inc. (C) 2002 * *****************************************************************************/ /******************************************************************************* * Filename: * --------- * Flash_tool.cpp * * Project: * -------- * Flash tool set * * Description: * ------------ * Flash tool set main project file * * Author: * ------- * FZ Hsu (mtk00303) * *============================================================================== * HISTORY * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!! *------------------------------------------------------------------------------ * $Revision: 1.7 $ * $Modtime: Jul 12 2004 00:22:30 $ * $Log: //mtkvs01/vmdata/flash_tool/archives/Flash_tool.cpp-arc $ * * Rev 1.7 Jul 19 2004 02:10:54 mtk00539 * 1. [FlashTool][New] Adapt new BROM_DLL v2.4.1001 for many features and bug fix. * 2. [FlashTool][Enhance] Export COM port read/write timeout setting. * 3. [FlashTool][Enhance] Change EMI setting to 32 bits. * Resolution for 82: [FlashTool v2.6.1001][New] Adapt with BROM_DLL v2.4.1001 and many enhancement. * * Rev 1.6 May 14 2004 17:03:58 mtk00539 * 1. [FlashTool][New] add CTRL+ALT+O hot-key to toggle Advanced Option Mode. * 2. [FlashTool][New] add FAT auto format mechanism. * 3. [FlashTool][New] add DA auto selection mechanism. * 4. [FlashTool][New] add STOP button. * 5. [FlashTool][Enhance] start timer when BootROM start cmd pass. * 6. [FlashTool][New] display flash info in status bar hint. * 7. [FlashTool][New] display format range info in format progress bar hint. * 8. [FlashTool][New] record the DA, Scatter and DL path separately. * Resolution for 68: [FlashTool v2.5.1009][New] add FAT auto format, DA auto selection mechanism and lots of enhancements. * * Rev 1.5 Mar 09 2004 21:06:44 mtk00539 * [Enhance] adapt new Boot_FlashTool interface. * * Rev 1.4 Jun 30 2003 19:19:34 mtk00539 * 1. [FlashTool][Add Features] Split flashtool function into brom.dll * 2. [FlashTool][Add Features] Format function: users can format any range you want without downloading procedure. * 3. [FlashTool][Add Features] Report format percentage. * 4. [FlashTool][Add Features] Check format range. * 5. [FlashTool][Add Features] Merge FlashTool for Pluto version. * 6. [FlashTool][Add Features] Runtime debug log: you can press (CTRL+ALT+T) to enable/disable debug log whenever you want. * 7. [FlashTool][Add Features] Forcedly Stop hot-key: you can forcedly stop FlashTool by pressing CTRL+Z. * 8. [FlashTool][BUG FIXED] Fix FlashTool MEM_CMD end_addr bug, FlashTool should use (begin_addr+length-1) as end_addr. * Resolution for 11: [FlashTool v2.3.1001][New Version] Split flashtool function into brom.dll * * Rev 1.3 Jun 03 2003 22:24:54 mtk00539 * 1. extend timeout to 10 sec for large image download in boot_2.cpp * 2. disable unnecesssary debug hot-key. * 3. add shift+ctrl+A for Jensen's DA debug tool kit. * 4. enable build number, and start from 1003. * 5. save baseband chip type, mcu frequency and auto-memory wait state setup flag to ini file. * 6. add DA_SET_REG_CMD command and remove FINISH_CMD, so that release power key could be issued from FlashTool, not hardcoded in DA. * 7. add DA_MCU_FREQ_CMD command, so that we don't have to select different DA while switching frequency. * 8. add new flash MB84VD23280FA-70 for Chicago project. * 9. remove DEVICE_CMD, DA will check flash automatically and report the flash type to PC. * 10. add DA_FORMAT_CMD command to support range format. * 11. display flash type on FlashTool. * 12. merge the DOWNLOAD.H header file, both FlashTool and DA will use the same header file. * 13. modify SPEED_CMD handshake by adding a sync mechanism to detect whether if the speed change is done by both sides. * Resolution for 7: [FlashTool v2.2.1003][AddFeature] Enhanced for KLM and Chicago project. * * Rev 1.2 May 20 2003 16:22:30 mtk00539 * Support 6205/6205B at 13MHz, 26MHz and 52MHz * Resolution for 6: [FlashTool v2.2][AddFeature] Support 6205/6205B at 13MHz, 26MHz and 52MHz. * * Rev 1.1 Jul 26 2002 11:52:18 admin * ver 0726 * * Rev 1.0 Jul 20 2002 19:26:12 admin * Initial revision. * *------------------------------------------------------------------------------ * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!! *============================================================================== *******************************************************************************/ //--------------------------------------------------------------------------- #include#pragma hdrstop USEFORM("main.cpp", MainForm); USEFORM("DA_Option.cpp", Form_DA_Option); USEFORM("ext_mem1.cpp", ext_mem1Form); USEFORM("OK_Wnd.cpp", Form_OK); USEFORM("about.cpp", Form_About); USEFORM("RB_Option.cpp", Form_RB_Option); USEFORM("DL_Go.cpp", Form_DL_GO); USEFORM("RB_Go.cpp", Form_RB_GO); USEFORM("frm_FormatOption.cpp", FormatOption); USEFORM("frm_BootROMStartCmdRetry.cpp", frm_BromStartCmdRetry); USEFORM("frm_COM_Option.cpp", COM_Option); //--------------------------------------------------------------------------- WINAPI WinMain(HINSTANCE, HINSTANCE, LPSTR, int) { try { Application->Initialize(); Application->CreateForm(__classid(TMainForm), &MainForm); Application->CreateForm(__classid(TForm_DA_Option), &Form_DA_Option); Application->CreateForm(__classid(Text_mem1Form), &ext_mem1Form); Application->CreateForm(__classid(TForm_OK), &Form_OK); Application->CreateForm(__classid(TForm_About), &Form_About); Application->CreateForm(__classid(TForm_RB_Option), &Form_RB_Option); Application->CreateForm(__classid(TForm_DL_GO), &Form_DL_GO); Application->CreateForm(__classid(TForm_RB_GO), &Form_RB_GO); Application->CreateForm(__classid(TFormatOption), &FormatOption); Application->CreateForm(__classid(Tfrm_BromStartCmdRetry), &frm_BromStartCmdRetry); Application->CreateForm(__classid(TCOM_Option), &COM_Option); Application->HintPause = 100; // 0.1 sec Application->HintHidePause = 100000; // 100 sec Application->Run(); } catch (Exception &exception) { Application->ShowException(&exception); } return 0; } //---------------------------------------------------------------------------