www.pudn.com > STM32F4_bootloader.zip > stm32f4xx_dbgmcu.h, change:2014-08-01,size:4296b


/** 
  ****************************************************************************** 
  * @file    stm32f4xx_dbgmcu.h 
  * @author  MCD Application Team 
  * @version V1.4.0 
  * @date    04-August-2014 
  * @brief   This file contains all the functions prototypes for the DBGMCU firmware library. 
  ****************************************************************************** 
  * @attention 
  * 
  * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> 
  * 
  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); 
  * You may not use this file except in compliance with the License. 
  * You may obtain a copy of the License at: 
  * 
  *        http://www.st.com/software_license_agreement_liberty_v2 
  * 
  * Unless required by applicable law or agreed to in writing, software  
  * distributed under the License is distributed on an "AS IS" BASIS,  
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
  * See the License for the specific language governing permissions and 
  * limitations under the License. 
  * 
  ****************************************************************************** 
  */ 
 
/* Define to prevent recursive inclusion -------------------------------------*/ 
#ifndef __STM32F4xx_DBGMCU_H 
#define __STM32F4xx_DBGMCU_H 
 
#ifdef __cplusplus 
 extern "C" { 
#endif 
 
/* Includes ------------------------------------------------------------------*/ 
#include "stm32f4xx.h" 
 
/** @addtogroup STM32F4xx_StdPeriph_Driver 
  * @{ 
  */ 
 
/** @addtogroup DBGMCU 
  * @{ 
  */  
 
/* Exported types ------------------------------------------------------------*/ 
/* Exported constants --------------------------------------------------------*/ 
 
/** @defgroup DBGMCU_Exported_Constants 
  * @{ 
  */  
#define DBGMCU_SLEEP                 ((uint32_t)0x00000001) 
#define DBGMCU_STOP                  ((uint32_t)0x00000002) 
#define DBGMCU_STANDBY               ((uint32_t)0x00000004) 
#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFF8) == 0x00) && ((PERIPH) != 0x00)) 
 
#define DBGMCU_TIM2_STOP             ((uint32_t)0x00000001) 
#define DBGMCU_TIM3_STOP             ((uint32_t)0x00000002) 
#define DBGMCU_TIM4_STOP             ((uint32_t)0x00000004) 
#define DBGMCU_TIM5_STOP             ((uint32_t)0x00000008) 
#define DBGMCU_TIM6_STOP             ((uint32_t)0x00000010) 
#define DBGMCU_TIM7_STOP             ((uint32_t)0x00000020) 
#define DBGMCU_TIM12_STOP            ((uint32_t)0x00000040) 
#define DBGMCU_TIM13_STOP            ((uint32_t)0x00000080) 
#define DBGMCU_TIM14_STOP            ((uint32_t)0x00000100) 
#define DBGMCU_RTC_STOP              ((uint32_t)0x00000400) 
#define DBGMCU_WWDG_STOP             ((uint32_t)0x00000800) 
#define DBGMCU_IWDG_STOP             ((uint32_t)0x00001000) 
#define DBGMCU_I2C1_SMBUS_TIMEOUT    ((uint32_t)0x00200000) 
#define DBGMCU_I2C2_SMBUS_TIMEOUT    ((uint32_t)0x00400000) 
#define DBGMCU_I2C3_SMBUS_TIMEOUT    ((uint32_t)0x00800000) 
#define DBGMCU_CAN1_STOP             ((uint32_t)0x02000000) 
#define DBGMCU_CAN2_STOP             ((uint32_t)0x04000000) 
#define IS_DBGMCU_APB1PERIPH(PERIPH) ((((PERIPH) & 0xF91FE200) == 0x00) && ((PERIPH) != 0x00)) 
 
#define DBGMCU_TIM1_STOP             ((uint32_t)0x00000001) 
#define DBGMCU_TIM8_STOP             ((uint32_t)0x00000002) 
#define DBGMCU_TIM9_STOP             ((uint32_t)0x00010000) 
#define DBGMCU_TIM10_STOP            ((uint32_t)0x00020000) 
#define DBGMCU_TIM11_STOP            ((uint32_t)0x00040000) 
#define IS_DBGMCU_APB2PERIPH(PERIPH) ((((PERIPH) & 0xFFF8FFFC) == 0x00) && ((PERIPH) != 0x00)) 
/** 
  * @} 
  */  
 
/* Exported macro ------------------------------------------------------------*/ 
/* Exported functions --------------------------------------------------------*/  
uint32_t DBGMCU_GetREVID(void); 
uint32_t DBGMCU_GetDEVID(void); 
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState); 
void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState); 
void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState); 
 
#ifdef __cplusplus 
} 
#endif 
 
#endif /* __STM32F4xx_DBGMCU_H */ 
 
/** 
  * @} 
  */  
 
/** 
  * @} 
  */  
 
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/