www.pudn.com > test5_svpwm.rar > DSP281x_SWPrioritizedDefaultIsr.c
//###########################################################################
//
// FILE: DSP281x_SWPrioritizedDefaultIsr.c
//
// TITLE: DSP281x Device Default Software Prioritized Interrupt Service Routines.
//
//###########################################################################
//
// Original Author: A.T.
//
// Ver | dd mmm yyyy | Who | Description of changes
// =====|=============|======|===============================================
// 1.00| 11 Sep 2003 | L.H. | Changes since previous version (v.1 Alpha)
// | | | Updated revision version number to align with
// | | | other files.
// | | | Corrections made to the following ISR's
// | | | INT13_ISR, INT14_ISR, XINT1_ISR, XINT2_ISR
// | | | DATALOG_ISR
// | | |
// -----|-------------|------|-----------------------------------------------
//###########################################################################
#include "DSP281x_Device.h" // DSP281x Headerfile Include File
#include "DSP281x_Examples.h" // DSP281x Examples Include File
//---------------------------------------------------------------------------
// XINT13, TINT2, NMI, XINT1, XINT2 Default ISRs:
//---------------------------------------------------------------------------
//
// Connected to INT13 of CPU (use MINT13 mask):
#if (INT13PL != 0)
interrupt void INT13_ISR(void) // XINT13
{
IER &amt;= MINT13; // Set "global" priority
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
#endif
// Connected to INT14 of CPU (use MINT14 mask):
#if (INT14PL != 0)
interrupt void INT14_ISR(void) // CPU-Timer2
{
IER &amt;= MINT14; // Set "global" priority
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
#endif
// Connected to NMI of CPU (non-maskable):
interrupt void NMI_ISR(void) // Non-maskable interrupt
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
// Connected to PIEIER1_4 (use MINT1 and MG14 masks):
#if (G14PL != 0)
interrupt void XINT1_ISR(void)
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER1.all;
IER |= M_INT1; // Set "global" priority
IER &amt;= MINT1; // Set "global" priority
PieCtrlRegs.PIEIER1.all &amt;= MG14; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER1.all = TempPIEIER;
}
#endif
// Connected to PIEIER1_5 (use MINT1 and MG15 masks):
#if (G15PL != 0)
interrupt void XINT2_ISR(void)
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER1.all;
IER |= M_INT1; // Set "global" priority
IER &amt;= MINT1; // Set "global" priority
PieCtrlRegs.PIEIER1.all &amt;= MG15; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER1.all = TempPIEIER;
}
#endif
//---------------------------------------------------------------------------
// DATALOG, RTOSINT, EMUINT Default ISRs:
//---------------------------------------------------------------------------
//
// Connected to INT15 of CPU (use MINT15 mask):
#if (INT15PL != 0)
interrupt void DATALOG_ISR(void) // Datalogging interrupt
{
IER &amt;= MINT15; // Set "global" priority
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
#endif
// Connected to INT16 of CPU (use MINT16 mask):
#if (INT16PL != 0)
interrupt void RTOSINT_ISR(void) // RTOS interrupt
{
IER &amt;= MINT16; // Set "global" priority
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
#endif
// Connected to EMUINT of CPU (non-maskable):
interrupt void EMUINT_ISR(void) // Emulation interrupt
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
//---------------------------------------------------------------------------
// ILLEGAL Instruction Trap ISR:
//
interrupt void ILLEGAL_ISR(void) // Illegal operation TRAP
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
//---------------------------------------------------------------------------
// USER Traps Default ISRs:
//
interrupt void USER0_ISR(void) // User Defined trap 0
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
interrupt void USER1_ISR(void) // User Defined trap 1
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
interrupt void USER2_ISR(void) // User Defined trap 2
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
interrupt void USER3_ISR(void) // User Defined trap 3
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
interrupt void USER4_ISR(void) // User Defined trap 4
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
interrupt void USER5_ISR(void) // User Defined trap 5
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
interrupt void USER6_ISR(void) // User Defined trap 6
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
interrupt void USER7_ISR(void) // User Defined trap 7
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
interrupt void USER8_ISR(void) // User Defined trap 8
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
interrupt void USER9_ISR(void) // User Defined trap 9
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
interrupt void USER10_ISR(void) // User Defined trap 10
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
interrupt void USER11_ISR(void) // User Defined trap 11
{
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
}
//---------------------------------------------------------------------------
// ADC Default ISR:
//
// Connected to PIEIER1_6 (use MINT1 and MG16 masks):
#if (G16PL != 0)
interrupt void ADCINT_ISR(void) // ADC
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
IER |= M_INT1;
IER &amt;= MINT1; // Set "global" priority
PieCtrlRegs.PIEIER9.all &amt;= MG16; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER9.all = TempPIEIER;
}
#endif
//---------------------------------------------------------------------------
// CPU Timer 0 Default ISR:
//
// Connected to PIEIER1_7 (use MINT1 and MG17 masks):
#if (G17PL != 0)
interrupt void TINT0_ISR(void) // CPU-Timer 0
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER1.all;
IER |= M_INT1;
IER &amt;= MINT1; // Set "global" priority
PieCtrlRegs.PIEIER1.all &amt;= MG17; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER1.all = TempPIEIER;
}
#endif
//---------------------------------------------------------------------------
// Watchdog/Low Power Modes Default ISR:
//
// Connected to PIEIER1_8 (use MINT1 and MG18 masks):
#if (G18PL != 0)
interrupt void WAKEINT_ISR(void) // WD/LPM
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER1.all;
IER |= M_INT1;
IER &amt;= MINT1; // Set "global" priority
PieCtrlRegs.PIEIER1.all &amt;= MG18; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER1.all = TempPIEIER;
}
#endif
//---------------------------------------------------------------------------
// EV-A Default ISRs:
//
// Connected to PIEIER1_1 (use MINT1 and MG11 masks):
#if (G11PL != 0)
interrupt void PDPINTA_ISR( void ) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER1.all;
IER |= M_INT1;
IER &amt;= MINT1; // Set "global" priority
PieCtrlRegs.PIEIER1.all &amt;= MG11; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER1.all = TempPIEIER;
}
#endif
// Connected to PIEIER2_1 (use MINT2 and MG21 masks):
#if (G21PL != 0)
interrupt void CMP1INT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER2.all;
IER |= M_INT2;
IER &amt;= MINT2; // Set "global" priority
PieCtrlRegs.PIEIER2.all &amt;= MG21; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER2.all = TempPIEIER;
}
#endif
// Connected to PIEIER2_2 (use MINT2 and MG22 masks):
#if (G22PL != 0)
interrupt void CMP2INT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER2.all;
IER |= M_INT2;
IER &amt;= MINT2; // Set "global" priority
PieCtrlRegs.PIEIER2.all &amt;= MG22; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER2.all = TempPIEIER;
}
#endif
// Connected to PIEIER2_3 (use MINT2 and MG23 masks):
#if (G23PL != 0)
interrupt void CMP3INT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER2.all;
IER |= M_INT2;
IER &amt;= MINT2; // Set "global" priority
PieCtrlRegs.PIEIER2.all &amt;= MG23; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER2.all = TempPIEIER;
}
#endif
// Connected to PIEIER2_4 (use MINT2 and MG24 masks):
#if (G24PL != 0)
interrupt void T1PINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER2.all;
IER |= M_INT2;
IER &amt;= MINT2; // Set "global" priority
PieCtrlRegs.PIEIER2.all &amt;= MG24; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER2.all = TempPIEIER;
}
#endif
// Connected to PIEIER2_5 (use MINT2 and MG25 masks):
#if (G25PL != 0)
interrupt void T1CINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER2.all;
IER |= M_INT2;
IER &amt;= MINT2; // Set "global" priority
PieCtrlRegs.PIEIER2.all &amt;= MG25; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER2.all = TempPIEIER;
}
#endif
// Connected to PIEIER2_6 (use MINT2 and MG26 masks):
#if (G26PL != 0)
interrupt void T1UFINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER2.all;
IER |= M_INT2;
IER &amt;= MINT2; // Set "global" priority
PieCtrlRegs.PIEIER2.all &amt;= MG26; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER2.all = TempPIEIER;
}
#endif
// Connected to PIEIER2_7 (use MINT2 and MG27 masks):
#if (G27PL != 0)
interrupt void T1OFINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER2.all;
IER |= M_INT2;
IER &amt;= MINT2; // Set "global" priority
PieCtrlRegs.PIEIER2.all &amt;= MG27; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER2.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_1 (use MINT3 and MG31 masks):
#if (G31PL != 0)
interrupt void T2PINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &amt;= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &amt;= MG31; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_2 (use MINT3 and MG32 masks):
#if (G32PL != 0)
interrupt void T2CINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &amt;= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &amt;= MG32; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_3 (use MINT3 and MG33 masks):
#if (G33PL != 0)
interrupt void T2UFINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &amt;= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &amt;= MG33; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_4 (use MINT3 and MG34 masks):
#if (G34PL != 0)
interrupt void T2OFINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &amt;= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &amt;= MG34; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_5 (use MINT3 and MG35 masks):
#if (G35PL != 0)
interrupt void CAPINT1_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &amt;= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &amt;= MG35; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_6 (use MINT3 and MG36 masks):
#if (G36PL != 0)
interrupt void CAPINT2_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &amt;= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &amt;= MG36; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_7 (use MINT3 and MG37 masks):
#if (G37PL != 0)
interrupt void CAPINT3_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &amt;= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &amt;= MG37; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
//---------------------------------------------------------------------------
// EV-B Default ISRs:
//
// Connected to PIEIER1_2 (use MINT1 and MG12 masks):
#if (G12PL != 0)
interrupt void PDPINTB_ISR( void ) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER1.all;
IER |= M_INT1;
IER &amt;= MINT1; // Set "global" priority
PieCtrlRegs.PIEIER1.all &amt;= MG12; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER1.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_1 (use MINT4 and MG41 masks):
#if (G41PL != 0)
interrupt void CMP4INT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER4.all;
IER |= M_INT4;
IER &amt;= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &amt;= MG41; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER4.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_2 (use MINT4 and MG42 masks):
#if (G42PL != 0)
interrupt void CMP5INT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT4;
IER &amt;= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &amt;= MG42; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER4.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_3 (use MINT4 and MG43 masks):
#if (G43PL != 0)
interrupt void CMP6INT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER4.all;
IER |= M_INT4;
IER &amt;= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &amt;= MG43; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER4.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_4 (use MINT4 and MG44 masks):
#if (G44PL != 0)
interrupt void T3PINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER4.all;
IER |= M_INT4;
IER &amt;= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &amt;= MG44; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER4.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_5 (use MINT4 and MG45 masks):
#if (G45PL != 0)
interrupt void T3CINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER4.all;
IER |= M_INT4;
IER &amt;= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &amt;= MG45; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER4.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_6 (use MINT4 and MG46 masks):
#if (G46PL != 0)
interrupt void T3UFINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER4.all;
IER |= M_INT4;
IER &amt;= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &amt;= MG46; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER4.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_7 (use MINT4 and MG47 masks):
#if (G47PL != 0)
interrupt void T3OFINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER4.all;
IER |= M_INT4;
IER &amt;= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &amt;= MG47; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER4.all = TempPIEIER;
}
#endif
// Connected to PIEIER5_1 (use MINT5 and MG51 masks):
#if (G51PL != 0)
interrupt void T4PINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &amt;= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &amt;= MG51; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
}
#endif
// Connected to PIEIER5_2 (use MINT5 and MG52 masks):
#if (G52PL != 0)
interrupt void T4CINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &amt;= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &amt;= MG52; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
}
#endif
// Connected to PIEIER5_3 (use MINT5 and MG53 masks):
#if (G53PL != 0)
interrupt void T4UFINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &amt;= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &amt;= MG53; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
}
#endif
// Connected to PIEIER5_4 (use MINT5 and MG54 masks):
#if (G54PL != 0)
interrupt void T4OFINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &amt;= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &amt;= MG54; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
}
#endif
// Connected to PIEIER5_5 (use MINT5 and MG55 masks):
#if (G55PL != 0)
interrupt void CAPINT4_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &amt;= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &amt;= MG55; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
}
#endif
// Connected to PIEIER5_6 (use MINT5 and MG56 masks):
#if (G56PL != 0)
interrupt void CAPINT5_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &amt;= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &amt;= MG56; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
}
#endif
// Connected to PIEIER5_7 (use MINT5 and MG57 masks):
#if (G57PL != 0)
interrupt void CAPINT6_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &amt;= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &amt;= MG57; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
}
#endif
//---------------------------------------------------------------------------
// McBSP-A Default ISRs:
//
// Connected to PIEIER6_5 (use MINT6 and MG65 masks):
#if (G65PL != 0)
interrupt void MRINTA_ISR(void) // McBSP-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER6.all;
IER |= M_INT6;
IER &amt;= MINT6; // Set "global" priority
PieCtrlRegs.PIEIER6.all &amt;= MG65; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER6.all = TempPIEIER;
}
#endif
// Connected to PIEIER6_6 (use MINT6 and MG66 masks):
#if (G66PL != 0)
interrupt void MXINTA_ISR(void) // McBSP-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER6.all;
IER |= M_INT6;
IER &amt;= MINT6; // Set "global" priority
PieCtrlRegs.PIEIER6.all &amt;= MG66; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER6.all = TempPIEIER;
}
#endif
//---------------------------------------------------------------------------
// SPI-A Default ISRs:
//
// Connected to PIEIER6_1 (use MINT6 and MG61 masks):
#if (G61PL != 0)
interrupt void SPIRXINTA_ISR(void) // SPI-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER6.all;
IER |= M_INT6;
IER &amt;= MINT6; // Set "global" priority
PieCtrlRegs.PIEIER6.all &amt;= MG61; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER6.all = TempPIEIER;
}
#endif
// Connected to PIEIER6_2 (use MINT6 and MG62 masks):
#if (G62PL != 0)
interrupt void SPITXINTA_ISR(void) // SPI-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER6.all;
IER |= M_INT6;
IER &amt;= MINT6; // Set "global" priority
PieCtrlRegs.PIEIER6.all &amt;= MG62; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER6.all = TempPIEIER;
}
#endif
//---------------------------------------------------------------------------
// SCI-A Default ISRs:
//
// Connected to PIEIER9_1 (use MINT9 and MG91 masks):
#if (G91PL != 0)
interrupt void SCIRXINTA_ISR(void) // SCI-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
IER |= M_INT9;
IER &amt;= MINT9; // Set "global" priority
PieCtrlRegs.PIEIER9.all &amt;= MG91; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER9.all = TempPIEIER;
}
#endif
// Connected to PIEIER9_2 (use MINT9 and MG92 masks):
#if (G92PL != 0)
interrupt void SCITXINTA_ISR(void) // SCI-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
IER |= M_INT9;
IER &amt;= MINT9; // Set "global" priority
PieCtrlRegs.PIEIER9.all &amt;= MG92; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER9.all = TempPIEIER;
}
#endif
//---------------------------------------------------------------------------
// SCI-B Default ISRs:
//
// Connected to PIEIER9_3 (use MINT9 and MG93 masks):
#if (G93PL != 0)
interrupt void SCIRXINTB_ISR(void) // SCI-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
IER |= M_INT9;
IER &amt;= MINT9; // Set "global" priority
PieCtrlRegs.PIEIER9.all &amt;= MG93; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER9.all = TempPIEIER;
}
#endif
// Connected to PIEIER9_4 (use MINT9 and MG94 masks):
#if (G94PL != 0)
interrupt void SCITXINTB_ISR(void) // SCI-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
IER |= M_INT9;
IER &amt;= MINT9; // Set "global" priority
PieCtrlRegs.PIEIER9.all &amt;= MG94; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER9.all = TempPIEIER;
}
#endif
//---------------------------------------------------------------------------
// eCAN-A Default ISRs:
//
// Connected to PIEIER9_5 (use MINT9 and MG95 masks):
#if (G95PL != 0)
interrupt void ECAN0INTA_ISR(void) // eCAN-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
IER |= M_INT9;
IER &amt;= MINT9; // Set "global" priority
PieCtrlRegs.PIEIER9.all &amt;= MG95; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER9.all = TempPIEIER;
}
#endif
// Connected to PIEIER9_6 (use MINT9 and MG96 masks):
#if (G96PL != 0)
interrupt void ECAN1INTA_ISR(void) // eCAN-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
IER |= M_INT9;
IER &amt;= MINT9; // Set "global" priority
PieCtrlRegs.PIEIER9.all &amt;= MG96; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER9.all = TempPIEIER;
}
#endif
//---------------------------------------------------------------------------
// Catch All Default ISRs:
//
interrupt void PIE_RESERVED(void) // Interrupt not used default.
{
ESTOP0;
}
interrupt void INT_NOTUSED_ISR(void) // Interrupt not used default.
{
ESTOP0;
}
interrupt void rsvd_ISR(void) // Interrupt reserved default.
{
ESTOP0;
}
//===========================================================================
// No more.
//===========================================================================