www.pudn.com > s3c2410boardTestProgram.zip > cache.c

/***************************************** 
  NAME: cache.c 
  DESC: CACHE test 
  HISTORY: 
  2002.03.07: ver 0.0 
  2003.03.31: added Test_Cache() 
 *****************************************/ 
 
#include "def.h" 
#include "option.h" 
#include "2410addr.h" 
#include "2410lib.h" 
#include "2410slib.h"  
#include "mmu.h" 
 
static void ICache_InitMMU(void); 
void MoveSDRAM2ICache(U32 addr); 
 
void Test_ICache(void) 
{ 
    int i; 
    U32 *pCacheableData=(void *)0x30200000; 
    U32 *pt;  
 
    ICache_InitMMU(); 
 
      
    for(i=0;i<0x4000/4;i++) 
	*(pCacheableData+i)=i; 
 
    MoveSDRAM2ICache((U32)pCacheableData); 
 
    *(pCacheableData+0)=0x55555555; 
    *(pCacheableData+0)=0xaaaaaaaa; 
 
    for(i=0;i<0x4000/4;i++) 
    { 
    	Uart_Printf("%8x  ",*(pCacheableData+i)); 
    } 
}        
 
 
void MoveSDRAM2ICache(U32 addr) 
{ 
    int i,j,pt; 
    MMU_DisableICache(); 
    MMU_InvalidateICache(); 
    //MMU_EnableICache(); 
    pt=addr; 
    for(i=0;i<64;i++) 
    	for(j=0;j<8;j++) 
    	{ 
    	    MMU_SetICacheLockdownBase((U32)i<<26); 
    	    MMU_PrefetchICacheMVA(pt);  
	    pt+=32; 
    	} 
    MMU_EnableICache(); 
}    	 
 
/******************************************************************** 
  0x31000000~0x310fffff will be non-cachable area for the ICache test. 
 ********************************************************************/ 
static void ICache_InitMMU(void) 
{ 
    int i,j; 
     
    MMU_DisableDCache(); 
    MMU_DisableICache(); 
 
    //If write-back is used,the DCache should be cleared. 
    for(i=0;i<64;i++) 
    	for(j=0;j<8;j++) 
    	    MMU_CleanInvalidateDCacheIndex((i<<26)|(j<<5)); 
    MMU_InvalidateICache(); 
     
    #if 0 
    //To complete MMU_Init() fast, Icache may be turned on here. 
    MMU_EnableICache();  
    #endif 
     
    MMU_DisableMMU(); 
    MMU_InvalidateTLB(); 
 
    MMU_SetMTT(0x00000000,0x01f00000,0x00000000,RW_CNB);  //bank0 
    MMU_SetMTT(0x08000000,0x03f00000,0x08000000,RW_CNB);  //bank1 
    MMU_SetMTT(0x10000000,0x05f00000,0x10000000,RW_NCNB); //bank2 
    MMU_SetMTT(0x18000000,0x07f00000,0x18000000,RW_NCNB); //bank3 
    MMU_SetMTT(0x20000000,0x09f00000,0x20000000,RW_NCNB); //bank4 
    MMU_SetMTT(0x28000000,0x0bf00000,0x28000000,RW_NCNB); //bank5 
     
    MMU_SetMTT(0x30000000,0x0c000000,0x30000000,RW_NCNB); //bank6-1 
    MMU_SetMTT(0x31000000,0x0cf00000,0x31000000,RW_CB);	  //bank6-1 
    MMU_SetMTT(0x33ff0000,0x0df00000,0x33ff0000,RW_NCNB); //bank6-2 
 
    MMU_SetMTT(0x38000000,0x0ff00000,0x38000000,RW_NCNB); //bank7 
 
    MMU_SetMTT(0x10000000,0x13f00000,0x10000000,RW_FAULT);//not used 
    MMU_SetMTT(0x48000000,0x5af00000,0x48000000,RW_NCNB); //SFR 
    MMU_SetMTT(0x5b000000,0xfff00000,0x5b000000,RW_FAULT);//not used 
 
    MMU_SetTTBase(_MMUTT_STARTADDRESS); 
    MMU_SetDomain(0x55555550|DOMAIN1_ATTR|DOMAIN0_ATTR);  
    	//DOMAIN1: no_access, DOMAIN0,2~15=client(AP is checked) 
    MMU_SetProcessId(0x0); 
    MMU_EnableAlignFault(); 
     
    MMU_EnableMMU(); 
    MMU_EnableICache(); 
    MMU_EnableDCache(); //DCache should be turned on after MMU is turned on. 
}     
 
 
void Test_Cache(void) 
{ 
   int temp=0, temp1=0, temp2=0, temp3=0, i, index, segment, word; 
     MMU_DisableMMU(); 
     MMU_DisableICache(); 
     MMU_DisableDCache(); 
  for(i=0; i<3; i++){ 
  
   temp=DCache_Test(); 
   if (temp) 
  	 Uart_Printf("DCache O.K.\n"); 
   else  { 
	Uart_Printf("DCache FAIL\n"); 
       index=*(unsigned int *)(0x31000000); 
	segment=*(unsigned int *)(0x31000004); 
	word=*(unsigned int *)(0x31000008); 
       Uart_Printf("Index: %d           Segment: %d          Word: %d\n", index, segment, word); 
   } 
   temp1=ICache_Test(); 
   if (temp1) 
	Uart_Printf("ICache O.K.\n"); 
   else	{ 
   	Uart_Printf("ICache FAIL\n"); 
         index=*(unsigned int *)(0x31000000); 
	segment=*(unsigned int *)(0x31000004); 
	word=*(unsigned int *)(0x31000008); 
       Uart_Printf("Index: %d           Segment: %d          Word: %d\n", index, segment, word); 
   	} 
    
   temp2=DMMU_Test(); 
   if (temp2) 
	Uart_Printf("DMMU Test O.K.\n"); 
   else	{ 
   	Uart_Printf("DMMU Test FAIL\n"); 
         index=*(unsigned int *)(0x31000000); 
	  Uart_Printf("DMMU Index: %d\n", index); 
   	} 
 
    temp3=IMMU_Test(); 
   if (temp3) 
	Uart_Printf("IMMU Test O.K.\n"); 
   else	{ 
   	Uart_Printf("IMMU Test FAIL\n"); 
         index=*(unsigned int *)(0x31000000); 
	  Uart_Printf("IMMU Index: %d\n", index); 
   	} 
  	}  
   while(1); 
}