www.pudn.com > lab27-CAN.zip > eCAN_back.pjt, change:2013-07-16,size:1709b

; Code Composer Project File, Version 2.0 (do not modify or remove this line) 
 
[Project Settings] 
ProjectDir="D:\MyProjects\28335 new board\lab27-CAN\" 
ProjectType=Executable 
CPUFamily=TMS320C28XX 
Tool="Compiler" 
Tool="CustomBuilder" 
Tool="DspBiosBuilder" 
Tool="Linker" 
Config="Debug" 
Config="Release" 
 
[Source Files] 
Source="SRC\DSP2833x_ADC_cal.asm" 
Source="SRC\DSP2833x_CodeStartBranch.asm" 
Source="SRC\DSP2833x_CpuTimers.c" 
Source="SRC\DSP2833x_DefaultIsr.c" 
Source="SRC\DSP2833x_ECan.c" 
Source="SRC\DSP2833x_GlobalVariableDefs.c" 
Source="SRC\DSP2833x_PieCtrl.c" 
Source="SRC\DSP2833x_PieVect.c" 
Source="SRC\DSP2833x_Sci.c" 
Source="SRC\DSP2833x_Spi.c" 
Source="SRC\DSP2833x_SysCtrl.c" 
Source="SRC\DSP2833x_usDelay.asm" 
Source="SRC\DSP2833x_Xintf.c" 
Source="SRC\eCAN_back.c" 
Source="CMD\28335_RAM_lnk.cmd" 
Source="CMD\DSP2833x_Headers_nonBIOS.cmd" 
 
["Compiler" Settings: "Debug"] 
Options=-g -pdsw225 -fr"$(Proj_dir)\Debug" -i"D:\MyProjects\28335 new board\lab27-CAN\INCLUDE" -d"_DEBUG" -d"LARGE_MODEL" -ml -v28 --float_support=fpu32 
 
["Compiler" Settings: "Release"] 
Options=-pdsw225 -o3 -fr"$(Proj_dir)\Release" -d"LARGE_MODEL" -ml -v28 
 
["Linker" Settings: "Debug"] 
Options=-c -ecode_strat -heap1000 -m".\Debug\eCAN_back.map" -o".\Debug\eCAN_back.out" -stack1000 -w -x -l"rts2800_fpu32.lib" 
 
["Linker" Settings: "Release"] 
Options=-c -m".\Release\eCAN_back.map" -o".\Release\eCAN_back.out" -w -x 
 
["CMD\28335_RAM_lnk.cmd" Settings: "Debug"] 
LinkOrder=1 
 
["CMD\28335_RAM_lnk.cmd" Settings: "Release"] 
LinkOrder=1 
 
["CMD\DSP2833x_Headers_nonBIOS.cmd" Settings: "Debug"] 
LinkOrder=1 
 
["CMD\DSP2833x_Headers_nonBIOS.cmd" Settings: "Release"] 
LinkOrder=1