www.pudn.com > SPI.rar > Project.prm, change:2012-01-05,size:1750b


/* This is a linker parameter file for the mc9s08dz60 */ 
 
NAMES END /* CodeWarrior will pass all the needed files to the linker by command line. But here you may add your own files too. */ 
 
SEGMENTS /* Here all RAM/ROM areas of the device are listed. Used in PLACEMENT below. */ 
    Z_RAM                    =  READ_WRITE   0x0080 TO 0x00FF; 
    RAM                      =  READ_WRITE   0x0100 TO 0x107F; 
    ROM                      =  READ_ONLY    0x1900 TO 0xFFAD; 
    ROM1                     =  READ_ONLY    0x1080 TO 0x13FF; 
    EEPROM                   =  READ_ONLY    0x1400 TO 0x17FF; 
 /* INTVECTS                 =  READ_ONLY    0xFFC0 TO 0xFFFF; Reserved for Interrupt Vectors */ 
END 
 
PLACEMENT /* Here all predefined and user segments are placed into the SEGMENTS defined above. */ 
    DEFAULT_RAM                         /* non-zero page variables */ 
                                        INTO  RAM; 
 
    _PRESTART,                          /* startup code */ 
    STARTUP,                            /* startup data structures */ 
    ROM_VAR,                            /* constant variables */ 
    STRINGS,                            /* string literals */ 
    VIRTUAL_TABLE_SEGMENT,              /* C++ virtual table segment */ 
    DEFAULT_ROM, 
    COPY                                /* copy down information: how to initialize variables */ 
                                        INTO  ROM; /* ,ROM1: To use "ROM1" as well, pass the option -OnB=b to the compiler */ 
 
    _DATA_ZEROPAGE,                     /* zero page variables */ 
    MY_ZEROPAGE                         INTO  Z_RAM; 
END 
 
 
STACKSIZE 0x50 
 
VECTOR 0 _Startup /* Reset vector: this is the default entry point for an application. */