www.pudn.com > ffmpeg_src2007.rar > ffserver.conf

# Port on which the server is listening. You must select a different 
# port from your standard HTTP web server if it is running on the same 
# computer. 
Port 8090 
 
# Address on which the server is bound. Only useful if you have 
# several network interfaces. 
BindAddress 0.0.0.0 
 
# Number of simultaneous requests that can be handled. Since FFServer 
# is very fast, it is more likely that you will want to leave this high 
# and use MaxBandwidth, below. 
MaxClients 1000 
 
# This the maximum amount of kbit/sec that you are prepared to 
# consume when streaming to clients. 
MaxBandwidth 1000 
 
# Access log file (uses standard Apache log file format) 
# '-' is the standard output. 
CustomLog - 
 
# Suppress that if you want to launch ffserver as a daemon. 
NoDaemon 
 
 
################################################################## 
# Definition of the live feeds. Each live feed contains one video 
# and/or audio sequence coming from an ffmpeg encoder or another 
# ffserver. This sequence may be encoded simultaneously with several 
# codecs at several resolutions. 
 
 
 
# You must use 'ffmpeg' to send a live feed to ffserver. In this 
# example, you can type: 
# 
# ffmpeg http://localhost:8090/feed1.ffm 
 
# ffserver can also do time shifting. It means that it can stream any 
# previously recorded live stream. The request should contain: 
# "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify 
# a path where the feed is stored on disk. You also specify the 
# maximum size of the feed, where zero means unlimited. Default: 
# File=/tmp/feed_name.ffm FileMaxSize=5M 
File /tmp/feed1.ffm 
FileMaxSize 200K 
 
# You could specify 
# ReadOnlyFile /saved/specialvideo.ffm 
# This marks the file as readonly and it will not be deleted or updated. 
 
# Specify launch in order to start ffmpeg automatically. 
# First ffmpeg must be defined with an appropriate path if needed, 
# after that options can follow, but avoid adding the http:// field 
#Launch ffmpeg 
 
# Only allow connections from localhost to the feed. 
ACL allow 127.0.0.1 
 
 
 
 
################################################################## 
# Now you can define each stream which will be generated from the 
# original audio and video stream. Each format has a filename (here 
# 'test1.mpg'). FFServer will send this stream when answering a 
# request containing this filename. 
 
 
 
# coming from live feed 'feed1' 
Feed feed1.ffm 
 
# Format of the stream : you can choose among: 
# mpeg       : MPEG-1 multiplexed video and audio 
# mpegvideo  : only MPEG-1 video 
# mp2        : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec) 
# ogg        : Ogg format (Vorbis audio codec) 
# rm         : RealNetworks-compatible stream. Multiplexed audio and video. 
# ra         : RealNetworks-compatible stream. Audio only. 
# mpjpeg     : Multipart JPEG (works with Netscape without any plugin) 
# jpeg       : Generate a single JPEG image. 
# asf        : ASF compatible streaming (Windows Media Player format). 
# swf        : Macromedia Flash compatible stream 
# avi        : AVI format (MPEG-4 video, MPEG audio sound) 
# master     : special ffmpeg stream used to duplicate a server 
Format mpeg 
 
# Bitrate for the audio stream. Codecs usually support only a few 
# different bitrates. 
AudioBitRate 32 
 
# Number of audio channels: 1 = mono, 2 = stereo 
AudioChannels 1 
 
# Sampling frequency for audio. When using low bitrates, you should 
# lower this frequency to 22050 or 11025. The supported frequencies 
# depend on the selected audio codec. 
AudioSampleRate 44100 
 
# Bitrate for the video stream 
VideoBitRate 64 
 
# Ratecontrol buffer size 
VideoBufferSize 40 
 
# Number of frames per second 
VideoFrameRate 3 
 
# Size of the video frame: WxH (default: 160x128) 
# The following abbreviations are defined: sqcif, qcif, cif, 4cif 
VideoSize 160x128 
 
# Transmit only intra frames (useful for low bitrates, but kills frame rate). 
#VideoIntraOnly 
 
# If non-intra only, an intra frame is transmitted every VideoGopSize 
# frames. Video synchronization can only begin at an intra frame. 
VideoGopSize 12 
 
# More MPEG-4 parameters 
# VideoHighQuality 
# Video4MotionVector 
 
# Choose your codecs: 
#AudioCodec mp2 
#VideoCodec mpeg1video 
 
# Suppress audio 
#NoAudio 
 
# Suppress video 
#NoVideo 
 
#VideoQMin 3 
#VideoQMax 31 
 
# Set this to the number of seconds backwards in time to start. Note that 
# most players will buffer 5-10 seconds of video, and also you need to allow 
# for a keyframe to appear in the data stream. 
#Preroll 15 
 
# ACL: 
 
# You can allow ranges of addresses (or single addresses) 
#ACL ALLOW   
 
# You can deny ranges of addresses (or single addresses) 
#ACL DENY   
 
# You can repeat the ACL allow/deny as often as you like. It is on a per 
# stream basis. The first match defines the action. If there are no matches, 
# then the default is the inverse of the last ACL statement. 
# 
# Thus 'ACL allow localhost' only allows access from localhost. 
# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and 
# allow everybody else. 
 
 
 
 
################################################################## 
# Example streams 
 
 
# Multipart JPEG 
 
# 
#Feed feed1.ffm 
#Format mpjpeg 
#VideoFrameRate 2 
#VideoIntraOnly 
#NoAudio 
#Strict -1 
# 
 
 
# Single JPEG 
 
# 
#Feed feed1.ffm 
#Format jpeg 
#VideoFrameRate 2 
#VideoIntraOnly 
##VideoSize 352x240 
#NoAudio 
#Strict -1 
# 
 
 
# Flash 
 
# 
#Feed feed1.ffm 
#Format swf 
#VideoFrameRate 2 
#VideoIntraOnly 
#NoAudio 
# 
 
 
# ASF compatible 
 
 
Feed feed1.ffm 
Format asf 
VideoFrameRate 15 
VideoSize 352x240 
VideoBitRate 256 
VideoBufferSize 40 
VideoGopSize 30 
AudioBitRate 64 
StartSendOnKey 
 
 
 
# MP3 audio 
 
# 
#Feed feed1.ffm 
#Format mp2 
#AudioCodec mp3 
#AudioBitRate 64 
#AudioChannels 1 
#AudioSampleRate 44100 
#NoVideo 
# 
 
 
# Ogg Vorbis audio 
 
# 
#Feed feed1.ffm 
#Title "Stream title" 
#AudioBitRate 64 
#AudioChannels 2 
#AudioSampleRate 44100 
#NoVideo 
# 
 
 
# Real with audio only at 32 kbits 
 
# 
#Feed feed1.ffm 
#Format rm 
#AudioBitRate 32 
#NoVideo 
#NoAudio 
# 
 
 
# Real with audio and video at 64 kbits 
 
# 
#Feed feed1.ffm 
#Format rm 
#AudioBitRate 32 
#VideoBitRate 128 
#VideoFrameRate 25 
#VideoGopSize 25 
#NoAudio 
# 
 
 
################################################################## 
# A stream coming from a file: you only need to set the input 
# filename and optionally a new format. Supported conversions: 
#    AVI -> ASF 
 
# 
#File "/usr/local/httpd/htdocs/tlive.rm" 
#NoAudio 
# 
 
# 
#File "/usr/local/httpd/htdocs/test.asf" 
#NoAudio 
#Author "Me" 
#Copyright "Super MegaCorp" 
#Title "Test stream from disk" 
#Comment "Test comment" 
# 
 
 
################################################################## 
# RTSP examples 
# 
# You can access this stream with the RTSP URL: 
#   rtsp://localhost:5454/test1-rtsp.mpg 
# 
# A non-standard RTSP redirector is also created. Its URL is: 
#   http://localhost:8090/test1-rtsp.rtsp 
 
# 
#Format rtp 
#File "/usr/local/httpd/htdocs/test1.mpg" 
# 
 
 
################################################################## 
# SDP/multicast examples 
# 
# If you want to send your stream in multicast, you must set the 
# multicast address with MulticastAddress. The port and the TTL can 
# also be set. 
# 
# An SDP file is automatically generated by ffserver by adding the 
# 'sdp' extension to the stream name (here 
# http://localhost:8090/test1-sdp.sdp). You should usually give this 
# file to your player to play the stream. 
# 
# The 'NoLoop' option can be used to avoid looping when the stream is 
# terminated. 
 
# 
#Format rtp 
#File "/usr/local/httpd/htdocs/test1.mpg" 
#MulticastAddress 224.124.0.1 
#MulticastPort 5000 
#MulticastTTL 16 
#NoLoop 
# 
 
 
################################################################## 
# Special streams 
 
# Server status 
 
 
Format status 
 
# Only allow local people to get the status 
ACL allow localhost 
ACL allow 192.168.0.0 192.168.255.255 
 
#FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico 
 
 
 
# Redirect index.html to the appropriate site 
 
 
URL http://www.ffmpeg.org/