www.pudn.com > expressionsb.rar > DlgTemp.cpp

// DlgTemp.cpp : implementation file 
// 
 
#include "stdafx.h" 
#include "test1.h" 
#include "DlgTemp.h" 
#include "EGraph.h" 
 
 
#ifdef _DEBUG 
#define new DEBUG_NEW 
#undef THIS_FILE 
static char THIS_FILE[] = __FILE__; 
#endif 
 
///////////////////////////////////////////////////////////////////////////// 
// CDlgTemp dialog 
 
 
CDlgTemp::CDlgTemp(CWnd* pParent /*=NULL*/) 
	: CDialog(CDlgTemp::IDD, pParent) 
{ 
	//{{AFX_DATA_INIT(CDlgTemp) 
		// NOTE: the ClassWizard will add member initialization here 
	//}}AFX_DATA_INIT 
	m_pDIB=NULL; 
	m_pStrategy=NULL; 
} 
 
 
void CDlgTemp::DoDataExchange(CDataExchange* pDX) 
{ 
	CDialog::DoDataExchange(pDX); 
	//{{AFX_DATA_MAP(CDlgTemp) 
		// NOTE: the ClassWizard will add DDX and DDV calls here 
	//}}AFX_DATA_MAP 
} 
 
 
BEGIN_MESSAGE_MAP(CDlgTemp, CDialog) 
	//{{AFX_MSG_MAP(CDlgTemp) 
	ON_WM_PAINT() 
	ON_WM_LBUTTONDOWN() 
	ON_WM_LBUTTONUP() 
	ON_WM_MOUSEMOVE() 
	//}}AFX_MSG_MAP 
END_MESSAGE_MAP() 
 
///////////////////////////////////////////////////////////////////////////// 
// CDlgTemp message handlers 
 
/** 
** 接受原始的DIB图像，并利用该图像构造一个新的DIB图像 
** 然后进行Gabor变换，变换后的向量取模 
** 将模映射到0~255之间，并显示出来 
** 参考CExpStrategy::GaborTF(), DIB::DIB() 
*/ 
void CDlgTemp::OnPaint()  
{ 
	CPaintDC dc(this); // device context for painting 
	if((m_pDIB==NULL)||(m_pStrategy==NULL)) 
		return; 
	/*CDIB *tmpDIB=new CDIB(m_pDIB,0,0,m_pDIB->GetDIBSize().cx,m_pDIB->GetDIBSize().cy); 
	if(tmpDIB==NULL) 
	{ 
		MessageBox("Failed to construct a DIB"); 
		return; 
	}*/ 
	CEGraph *tmpEGraph=NULL; 
		tmpEGraph=new CEGraph(); 
		if(!(tmpEGraph->init_testExpr(m_pDIB,m_pStrategy))) 
		{//构造模板弹性图失败 
			MessageBox("构造模板弹性图失败：tmpEGraph->init_tempExpr"); 
			return; 
		} 
		///////// 
//	FLOAT *EGraph=new FLOAT[360]; 
//	int i,j; 
//	for(i=0;i<20;i++) 
//		for(j=0;j<18;j++) 
//			EGraph[i*18+j]=tmpEGraph->m_module[i*18+j]; 
	//////// 
//	FLOAT *EGraph=NULL; 
//	EGraph=m_pStrategy->GaborTF(m_pDIB,0,0,0,0,FALSE); 
	int EGcx,EGcy; 
	EGcx=18; 
	EGcy=20; 
	//EGcx=m_pDIB->GetDIBSize().cx/5; 
	//EGcy=m_pDIB->GetDIBSize().cy/5; 
//	CDIB *tmpDIB=new CDIB(m_pDIB,EGraph,CSize(EGcx,EGcy),FALSE); 
	CDIB *tmpDIB=new CDIB(m_pDIB,tmpEGraph->m_module,CSize(EGcx,EGcy),FALSE); 
	CRect rectImg; 
	rectImg.top=20; 
	rectImg.left=20; 
	rectImg.right=EGcx*5+20; 
	rectImg.bottom=EGcy*5+20; 
	tmpDIB->PaintDIB(dc.m_hDC,&rectImg); 
///////////标记关键点 
	tmpEGraph->DetectKeyPoints(); 
	CPen newPen(PS_SOLID,1,RGB(255,0,0)); 
	CPen *oldPen; 
	CBrush *oldBrush; 
	oldPen=(CPen*)dc.SelectObject(&newPen); 
	oldBrush=(CBrush*)dc.SelectStockObject(NULL_BRUSH); 
	int i,left,top; 
 
/*	for(i=0;im_keyPoints[i].x*5; 
		top=tmpEGraph->m_keyPoints[i].y*5; 
		dc.Rectangle(left+20,top+20,left+25,top+25); 
	} 
	CRect rect;//(2,3,15,8) 
	rect.left=20+2*5; 
	rect.top=20+2*5; 
	rect.right=20+16*5; 
	rect.bottom=20+7*5; 
	dc.Rectangle(&rect); 
///////////////////////////// 
 
	//	CRect rect;(5,12,13,18) 
	rect.left=20+5*5; 
	rect.top=20+12*5; 
	rect.right=20+13*5; 
	rect.bottom=20+18*5; 
	dc.Rectangle(&rect); 
*///////////////////////// 
	CPoint key_points[24]={CPoint(3,2),CPoint(6,2),CPoint(2,4),CPoint(7,4),CPoint(4,5), 
		CPoint(11,2),CPoint(13,2),CPoint(10,4),CPoint(14,4),CPoint(13,5), 
		CPoint(6,1),CPoint(9,1),CPoint(5,13),CPoint(8,13),CPoint(11,13), 
		CPoint(4,14),CPoint(12,14),CPoint(6,16),CPoint(8,16),CPoint(11,16), 
		CPoint(6,10),CPoint(5,11),CPoint(10,10),CPoint(11,11)}; 
	for(i=0;i<24;i++) 
	{ 
		left=key_points[i].x*5; 
		top=key_points[i].y*5; 
		dc.Rectangle(left+20,top+20,left+25,top+25); 
	}	 
	dc.SelectObject(oldBrush); 
	dc.SelectObject(oldPen); 
//////////////////// 
	delete tmpDIB; 
//	delete [] EGraph; 
//	if(tmpEGraph!=NULL) 
//		delete [] tmpEGraph; 
} 
 
void CDlgTemp::OnLButtonDown(UINT nFlags, CPoint point)  
{ 
	// TODO: Add your message handler code here and/or call default 
	 
	CDialog::OnLButtonDown(nFlags, point); 
} 
 
void CDlgTemp::OnLButtonUp(UINT nFlags, CPoint point)  
{ 
	// TODO: Add your message handler code here and/or call default 
	 
	CDialog::OnLButtonUp(nFlags, point); 
} 
 
void CDlgTemp::OnMouseMove(UINT nFlags, CPoint point)  
{ 
	// TODO: Add your message handler code here and/or call default 
	CDialog::OnMouseMove(nFlags, point); 
}