www.pudn.com > steper8.zip > pwm.pjt, change:2011-07-30,size:2282b


; Code Composer Project File, Version 2.0 (do not modify or remove this line) 
 
[Project Settings] 
ProjectName="pwm" 
ProjectDir="G:\test\DSP\TOP2812\TOP2812_CODE\xinzeng\EX25_steper8\" 
ProjectType=Executable 
CPUFamily=TMS320C28XX 
Tool="Compiler" 
Tool="CustomBuilder" 
Tool="DspBiosBuilder" 
Tool="Linker" 
Config="Debug" 
Config="Release" 
 
[Source Files] 
Source="DSP28_Adc.c" 
Source="DSP28_CpuTimers.c" 
Source="DSP28_DefaultIsr.c" 
Source="DSP28_ECan.c" 
Source="DSP28_Ev.c" 
Source="DSP28_GlobalVariableDefs.c" 
Source="DSP28_Gpio.c" 
Source="DSP28_InitPeripherals.c" 
Source="DSP28_Mcbsp.c" 
Source="DSP28_PieCtrl.c" 
Source="DSP28_PieVect.c" 
Source="DSP28_Sci.c" 
Source="DSP28_Spi.c" 
Source="DSP28_SysCtrl.c" 
Source="DSP28_Xintf.c" 
Source="DSP28_XIntrupt.c" 
Source="rts2800n.lib" 
Source="STEP_MOT.c" 
Source="SRAM.cmd" 
 
["Compiler" Settings: "Debug"] 
Options=-g -q -fr"G:\test\DSP\TOP2812\TOP2812_CODE\xinzeng\EX25_steper8\Debug" -d"_DEBUG" -d"LARGE_MODEL" -ml -v28 
 
["Compiler" Settings: "Release"] 
Options=-q -o3 -fr"G:\test\DSP\TOP2812\TOP2812_CODE\xinzeng\EX25_steper8\Release" -d"LARGE_MODEL" -ml -v28 
 
["DspBiosBuilder" Settings: "Debug"] 
Options=-v28 
 
["DspBiosBuilder" Settings: "Release"] 
Options=-v28 
 
["Linker" Settings: "Debug"] 
Options=-q -c -m".\Debug\pwm.map" -o".\Debug\pwm.out" -x 
 
["Linker" Settings: "Release"] 
Options=-q -c -o".\Release\pwm.out" -x 
 
["DSP28_Adc.c" Settings: "Debug"] 
LinkOrder=2 
 
["DSP28_CpuTimers.c" Settings: "Debug"] 
LinkOrder=3 
 
["DSP28_DefaultIsr.c" Settings: "Debug"] 
LinkOrder=4 
 
["DSP28_ECan.c" Settings: "Debug"] 
LinkOrder=5 
 
["DSP28_Ev.c" Settings: "Debug"] 
LinkOrder=6 
 
["DSP28_GlobalVariableDefs.c" Settings: "Debug"] 
LinkOrder=7 
 
["DSP28_Gpio.c" Settings: "Debug"] 
LinkOrder=9 
 
["DSP28_InitPeripherals.c" Settings: "Debug"] 
LinkOrder=8 
 
["DSP28_Mcbsp.c" Settings: "Debug"] 
LinkOrder=10 
 
["DSP28_PieCtrl.c" Settings: "Debug"] 
LinkOrder=11 
 
["DSP28_PieVect.c" Settings: "Debug"] 
LinkOrder=12 
 
["DSP28_Sci.c" Settings: "Debug"] 
LinkOrder=13 
 
["DSP28_Spi.c" Settings: "Debug"] 
LinkOrder=14 
 
["DSP28_SysCtrl.c" Settings: "Debug"] 
LinkOrder=15 
 
["DSP28_Xintf.c" Settings: "Debug"] 
LinkOrder=16 
 
["DSP28_XIntrupt.c" Settings: "Debug"] 
LinkOrder=17