www.pudn.com > AT91SAM9261-BasicLCD-IAR4_30A-1_1.zip > com.h, change:2006-06-14,size:3904b

 //  ---------------------------------------------------------------------------- 
 //          ATMEL Microcontroller Software Support  -  ROUSSET  - 
 //  ---------------------------------------------------------------------------- 
 //  DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR 
 //  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
 //  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE 
 //  DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, 
 //  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
 //  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
 //  OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
 //  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
 //  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 
 //  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
 //  ---------------------------------------------------------------------------- 
//*---------------------------------------------------------------------------- 
//* File Name           : com.h 
//* Object              : 
//* 
//* 1.0 27/03/03 HIi    : Creation 
//*---------------------------------------------------------------------------- 
#ifndef com_h 
#define com_h 
 
#define AT91C_CB_SIZE	80			// size of the console buffer 
 
//* Escape sequences */ 
#define ESC				\033 
#define CLRSCREEN		"\033[2J"	//\033 = ESC in octal 
#define ClEARLINE 		"\033[K"		// Clear line, from cursor position to the right most position of line 
 
//* Cursor Movement */ 
#define MOVEUP(num) 	"ESC[numA" 		// Move the cursor up num positions 
#define MOVEDOWN(num)   "ESC[numB" 		// Move the cursor down num positions 
#define MOVERIGHT(num)  "ESC[numC" 		// Move the cursor right num positions 
#define MOVELEFT(num) 	"ESC[numD"  	// Move the cursor left num positions 
#define MOVETO(row,col) "ESC[row;colH" 	// Move the cursor to the (col, row) position. Note that the row comes before column; that is, y comes before x. Either col or row can be omitted. Row and column both start with "1," not zero. (1, 1) corresponds to the top-left corner of the screen. 
 
//* Character Mode */ 
 
#define CHANGE_CHAR_MODE(attr) "ESC[attrm" 	//Change the character mode with attribute attr. The attributes are numbers listed below. 
 
#define ALL_ATTRIB_OFF 		0		// All attributes turned off. (Except for foreground and background color). 
#define HIGH_INTENSITY		1 		// Bold. 
#define LOW_INTENSITY		2		// Normal. 
#define UNDERLINE			4		// Underline font. 
#define BLINK				5		// Blinking font. 
#define RAPID_BLINK			6 		// Works only on some systems. 
#define REVERSE_VIDEO		7		// Swapping the foreground color and the background color. 
#define FOREGROUND_BLACK 	30		// Black. 
#define FOREGROUND_RED		31		// Red. 
#define FOREGROUND_GREEN	32 		// Green. 
#define FOREGROUND_YELLOW	33 		// Yellow. 
#define FOREGROUND_BLUE		34 		// Blue. 
#define FOREGROUND_MAGENTA	35 		// Magenta. 
#define FOREGROUND_CYAN		36 		// Cyan. 
#define FOREGROUND_WHITE 	37 		// White. 
#define BACKGROUND_BLACK 	40 		// Black. 
#define BACKGROUND_RED		41 		// Red. 
#define BACKGROUND_GREEN 	42 		// Green. 
#define BACKGROUND_YELLOW 	43 		// Yellow. 
#define BACKGROUND_BLUE 	44 		// Blue. 
#define BACKGROUND_MAGENTA 	45 		// Magenta. 
#define BACKGROUND_CYAN 	46 		// Cyan. 
#define BACKGROUND_WHITE	47 		// White. 
 
struct __FILE { 
    int handle; 
    /* Whatever you need here (if the only files you are using 
       is the stdoutput using printf for debugging, no file 
       handling is required) */ 
}; 
 
 
extern char message[AT91C_CB_SIZE]; 
extern void AT91F_ClrScr(void); 
extern int AT91F_ReadLine (const char *const prompt, char *console_buffer); 
extern void AT91F_WaitKeyPressed(void); 
 
#endif