www.pudn.com > MT7681_IoT_Package_v0.02.rar > IoT_MT7681_PKG_ReleaseNote_v0.02.txt, change:2014-01-28,size:2252b


=================================================================================
Package Name      :  IoT_MT7681_PKG_v0.01
Release Version   :  v0.01
Loader Name       :  loader_0120.bin
APK Version       :  v0.8
Release Date      :  2014-01-20
Package Changlist :  91442
Loader Changlist  :  91449
APK Changlist     :  91173


Feature Support and Notes:
1: Support Boot from Flash
2: Support smart connect and scan
3: Support Auth, Assoc with target AP which indicated by the scan result
   (Only support AuthMode: Open, Open(WEP))
   (The WPA2_PSK is developmenting)
4: Support Wifi Data Command Parsing for GPIO_SET, GPIO_GET,  Offline, Uart Tx
   (The Data Command: PWM_Set is not coexist with UartControl, thus PWM_Set default is turn off)
   (GPIO_GET will change GPIO to input mode, and reset GPIO to high)
   (The Data Command: Uart Rx is developmenting)
5: Support AT Command from UART for Version Request, Reboot, ChannelSwitch
6: Support Flash Read/Write
	 (Because Flash sector shall be erased before flash writting,
	  another simple Flash Write API is developmenting)


Known issue:
a) AT Command: AT#Reboot might fail for some reason
b) Data Command:  Query Data might fail for some reason
c) Smart connection might fail with some specific AP router

=================================================================================

=================================================================================
Package Name      :  IoT_MT7681_PKG_v0.02
Release Version   :  v0.02
Loader Name       :  loader_0120.bin
APK Version       :  v0.9
Release Date      :  2014-01-28
Package Changlist :  91894
Loader Changlist  :  91449
APK Changlist     :  91885


Feature Support and Notes:
1: Support TCP/IP lite(Server/Client), DHCPC, ARP
2: Support WPA2-PSK
3: Support Sta config settings read/write from Flash
4: Support AT Command from UART configration
5: Support AT Command TCP/IP (Server)
   (default turn off above two AT command)
6: Support Flash Read/Write API


Known issue:
a) AT Command: AT#Reboot might fail for some reason
b) Data Command:  Query Data might fail for some reason
c) Smart connection might fail with some specific AP router

=================================================================================