www.pudn.com > DesignOfCarLight.rar > fro_light.fit

-- MAX+plus II Compiler Fit File       
-- Version 10.1 06/12/2001             
-- Compiled: 10/23/2005 17:10:10       
 
-- Copyright (C) 1988-2001 Altera Corporation 
-- Any megafunction design, and related net list (encrypted or decrypted), 
-- support information, device programming or simulation file, and any other 
-- associated documentation or information provided by Altera or a partner 
-- under Altera's Megafunction Partnership Program may be used only to 
-- program PLD devices (but not masked PLD devices) from Altera.  Any other 
-- use of such megafunction design, net list, support information, device 
-- programming or simulation file, or any other related documentation or 
-- information is prohibited for any other purpose, including, but not 
-- limited to modification, reverse engineering, de-compiling, or use with 
-- any other silicon devices, unless such use is explicitly licensed under 
-- a separate agreement with Altera or a megafunction partner.  Title to 
-- the intellectual property, including patents, copyrights, trademarks, 
-- trade secrets, or maskworks, embodied in any such megafunction design, 
-- net list, support information, device programming or simulation file, or 
-- any other related documentation or information provided by Altera or a 
-- megafunction partner, remains with Altera, the megafunction partner, or 
-- their respective licensors.  No other licenses, including any licenses 
-- needed under any third party's intellectual property, are provided herein. 
 
CHIP "fro_light" 
BEGIN 
 
    DEVICE = "EPF10K10LC84-3"; 
 
    "clk"                          : INPUT_PIN  = 42     ; 
    "glistenab"                    : INPUT_PIN  = 2      ; 
    "glisten"                      : OUTPUT_PIN = 25     ; 
    ":25"                          : LOCATION   = LC8_B2 ; 
 
END; 
 
INTERNAL_INFO "fro_light" 
BEGIN 
	DEVICE = EPF10K10LC84-3; 
    OD3P42  : LORAX = "1:FB3|2:FH3R1,PA5R1C1->LC8_B2||"; 
    OD1P2   : LORAX = "1:FB1|2:FH1R1,PA20R1C1->LC8_B2||"; 
    LC8_B2  : LORAX = "1:MSW7R1C1,HHL35R1->OH15R1P25|"; 
	LC8_B2  : LORAX2 = "X, X, OD1P2, OD3P42"; 
END;