www.pudn.com > squirrelmail-1.2.10.zip > conf.pl, change:2002-09-11,size:97051b
#!/usr/bin/env perl
# conf.pl
# Luke Ehresman (luke@squirrelmail.org)
#
# A simple configure script to configure squirrelmail
#
# $Id: conf.pl,v 1.118.2.4 2002/09/11 15:55:22 kink Exp $
############################################################
$conf_pl_version = "1.2.0";
############################################################
# Check what directory we're supposed to be running in, and
# change there if necessary. File::Basename has been in
# Perl since at least 5.003_7, and nobody sane runs anything
# before that, but just in case.
############################################################
if ( eval q{require "File/Basename.pm"} ) {
my $dir = File::Basename::dirname($0);
chdir($dir);
}
############################################################
# Some people try to run this as a CGI. That's wrong!
############################################################
if ( defined( $ENV{'PATH_INFO'} )
|| defined( $ENV{'QUERY_STRING'} )
|| defined( $ENV{'REQUEST_METHOD'} ) ) {
print "Content-Type: text/html\n\n";
print "You must run this script from the command line.";
exit;
}
############################################################
# First, lets read in the data already in there...
############################################################
if ( -e "config.php" ) {
open( FILE, "config.php" );
while ( $line = ) {
$line =~ s/^\s+//;
$line =~ s/^\$//;
$var = $line;
$var =~ s/=/EQUALS/;
if ( $var =~ /^([a-z]|[A-Z])/ ) {
@o = split ( /\s*EQUALS\s*/, $var );
if ( $o[0] eq "config_version" ) {
$o[1] =~ s/[\n|\r]//g;
$o[1] =~ s/[\'|\"];\s*$//;
$o[1] =~ s/;$//;
$o[1] =~ s/^[\'|\"]//;
$config_version = $o[1];
close(FILE);
}
}
}
close(FILE);
if ( $config_version ne $conf_pl_version ) {
system "clear";
print $WHT. "WARNING:\n" . $NRM;
print " The file \"config/config.php\" was found, but it is for\n";
print " an older version of SquirrelMail. It is possible to still\n";
print " read the defaults from this file but be warned that many\n";
print " preferences change between versions. It is recommended that\n";
print " you start with a clean config.php for each upgrade that you\n";
print " do. To do this, just move config/config.php out of the way.\n";
print "\n";
print "Continue loading with the old config.php [y/N]? ";
$ctu = ;
if ( ( $ctu !~ /^y\n/i ) || ( $ctu =~ /^\n/ ) ) {
exit;
}
print "\nDo you want me to stop warning you [y/N]? ";
$ctu = ;
if ( $ctu =~ /^y\n/i ) {
$print_config_version = $conf_pl_version;
} else {
$print_config_version = $config_version;
}
} else {
$print_config_version = $config_version;
}
$config = 1;
open( FILE, "config.php" );
} elsif ( -e "config_default.php" ) {
open( FILE, "config_default.php" );
while ( $line = ) {
$line =~ s/^\s+//;
$line =~ s/^\$//;
$var = $line;
$var =~ s/=/EQUALS/;
if ( $var =~ /^([a-z]|[A-Z])/ ) {
@o = split ( /\s*EQUALS\s*/, $var );
if ( $o[0] eq "config_version" ) {
$o[1] =~ s/[\n|\r]//g;
$o[1] =~ s/[\'|\"];\s*$//;
$o[1] =~ s/;$//;
$o[1] =~ s/^[\'|\"]//;
$config_version = $o[1];
close(FILE);
}
}
}
close(FILE);
if ( $config_version ne $conf_pl_version ) {
system "clear";
print $WHT. "WARNING:\n" . $NRM;
print " You are trying to use a 'config_default.php' from an older\n";
print " version of SquirrelMail. This is HIGHLY unrecommended. You\n";
print " should get the 'config_default.php' that matches the version\n";
print " of SquirrelMail that you are running. You can get this from\n";
print " the SquirrelMail web page by going to the following URL:\n";
print " http://www.squirrelmail.org.\n";
print "\n";
print "Continue loading with old config_default.php (a bad idea) [y/N]? ";
$ctu = ;
if ( ( $ctu !~ /^y\n/i ) || ( $ctu =~ /^\n/ ) ) {
exit;
}
print "\nDo you want me to stop warning you [y/N]? ";
$ctu = ;
if ( $ctu =~ /^y\n/i ) {
$print_config_version = $conf_pl_version;
} else {
$print_config_version = $config_version;
}
} else {
$print_config_version = $config_version;
}
$config = 2;
open( FILE, "config_default.php" );
} else {
print "No configuration file found. Please get config_default.php\n";
print "or config.php before running this again. This program needs\n";
print "a default config file to get default values.\n";
exit;
}
# Read and parse the current configuration file
# (either config.php or config_default.php).
while ( $line = ) {
$line =~ s/^\s+//;
$line =~ s/^\$//;
$var = $line;
$var =~ s/=/EQUALS/;
if ( $var =~ /^([a-z]|[A-Z])/ ) {
@options = split ( /\s*EQUALS\s*/, $var );
$options[1] =~ s/[\n|\r]//g;
$options[1] =~ s/[\'|\"];\s*$//;
$options[1] =~ s/;$//;
$options[1] =~ s/^[\'|\"]//;
if ( $options[0] =~ /^theme\[[0-9]+\]\[['|"]PATH['|"]\]/ ) {
$sub = $options[0];
$sub =~ s/\]\[['|"]PATH['|"]\]//;
$sub =~ s/.*\[//;
if ( -e "../themes" ) {
$options[1] =~ s/^\.\.\/config/\.\.\/themes/;
}
$theme_path[$sub] = $options[1];
} elsif ( $options[0] =~ /^theme\[[0-9]+\]\[['|"]NAME['|"]\]/ ) {
$sub = $options[0];
$sub =~ s/\]\[['|"]NAME['|"]\]//;
$sub =~ s/.*\[//;
$theme_name[$sub] = $options[1];
} elsif ( $options[0] =~ /^plugins\[[0-9]+\]/ ) {
$sub = $options[0];
$sub =~ s/\]//;
$sub =~ s/^plugins\[//;
$plugins[$sub] = $options[1];
} elsif ( $options[0] =~ /^ldap_server\[[0-9]+\]/ ) {
$sub = $options[0];
$sub =~ s/\]//;
$sub =~ s/^ldap_server\[//;
$continue = 0;
while ( ( $tmp = ) && ( $continue != 1 ) ) {
if ( $tmp =~ /\);\s*$/ ) {
$continue = 1;
}
if ( $tmp =~ /^\s*[\'|\"]host[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]host[\'|\"]\s*=>\s*[\'|\"]//i;
$tmp =~ s/[\'|\"],?\s*$//;
$tmp =~ s/[\'|\"]\);\s*$//;
$host = $tmp;
} elsif ( $tmp =~ /^\s*[\'|\"]base[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]base[\'|\"]\s*=>\s*[\'|\"]//i;
$tmp =~ s/[\'|\"],?\s*$//;
$tmp =~ s/[\'|\"]\);\s*$//;
$base = $tmp;
} elsif ( $tmp =~ /^\s*[\'|\"]charset[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]charset[\'|\"]\s*=>\s*[\'|\"]//i;
$tmp =~ s/[\'|\"],?\s*$//;
$tmp =~ s/[\'|\"]\);\s*$//;
$charset = $tmp;
} elsif ( $tmp =~ /^\s*[\'|\"]port[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]port[\'|\"]\s*=>\s*[\'|\"]?//i;
$tmp =~ s/[\'|\"]?,?\s*$//;
$tmp =~ s/[\'|\"]?\);\s*$//;
$port = $tmp;
} elsif ( $tmp =~ /^\s*[\'|\"]maxrows[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]maxrows[\'|\"]\s*=>\s*[\'|\"]?//i;
$tmp =~ s/[\'|\"]?,?\s*$//;
$tmp =~ s/[\'|\"]?\);\s*$//;
$maxrows = $tmp;
} elsif ( $tmp =~ /^\s*[\'|\"]name[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]name[\'|\"]\s*=>\s*[\'|\"]//i;
$tmp =~ s/[\'|\"],?\s*$//;
$tmp =~ s/[\'|\"]\);\s*$//;
$name = $tmp;
}
}
$ldap_host[$sub] = $host;
$ldap_base[$sub] = $base;
$ldap_name[$sub] = $name;
$ldap_port[$sub] = $port;
$ldap_maxrows[$sub] = $maxrows;
$ldap_charset[$sub] = $charset;
} else {
${ $options[0] } = $options[1];
}
}
}
close FILE;
if ( $useSendmail ne "true" ) {
$useSendmail = "false";
}
if ( !$sendmail_path ) {
$sendmail_path = "/usr/sbin/sendmail";
}
if ( !$pop_before_smtp ) {
$pop_before_smtp = "false";
}
if ( !$default_unseen_notify ) {
$default_unseen_notify = 2;
}
if ( !$default_unseen_type ) {
$default_unseen_type = 1;
}
if ( !$config_use_color ) {
$config_use_color = 0;
}
if ( !$invert_time ) {
$invert_time = "false";
}
if ( !$force_username_lowercase ) {
$force_username_lowercase = "false";
}
if ( !$optional_delimiter ) {
$optional_delimiter = "detect";
}
if ( !$use_authenticated_smtp ) {
$use_authenticated_smtp = "false";
}
if ( !$auto_create_special ) {
$auto_create_special = "false";
}
if ( !$default_use_priority ) {
$default_use_priority = "true";
}
if ( !$hide_sm_attributions ) {
$hide_sm_attributions = "false";
}
if ( !$default_use_mdn ) {
$default_use_mdn = "true";
}
if ( !$delete_folder ) {
$delete_folder = "false";
}
if ( !$noselect_fix_enable ) {
$noselect_fix_enable = "false";
}
if ( !$frame_top ) {
$frame_top = "_top";
}
if ( !$edit_identity ) {
$edit_identity = "true";
}
if ( !$edit_name ) {
$edit_name = "true";
}
if ( !$allow_thread_sort ) {
$allow_thread_sort = 'false';
}
if ( !$allow_server_sort ) {
$allow_server_sort = 'false';
}
if ( !$allow_charset_search ) {
$allow_charset_search = 'true';
}
if ( !$prefs_user_field ) {
$prefs_user_field = 'user';
}
if ( !$prefs_key_field ) {
$prefs_key_field = 'prefkey';
}
if ( !$prefs_val_field ) {
$prefs_val_field = 'prefval';
}
if ( $ARGV[0] eq '--install-plugin' ) {
print "Activating plugin " . $ARGV[1] . "\n";
push @plugins, $ARGV[1];
save_data();
exit(0);
} elsif ( $ARGV[0] eq '--remove-plugin' ) {
print "Removing plugin " . $ARGV[1] . "\n";
foreach $plugin (@plugins) {
if ( $plugin ne $ARGV[1] ) {
push @newplugins, $plugin;
}
}
@plugins = @newplugins;
save_data();
exit(0);
}
#####################################################################################
if ( $config_use_color == 1 ) {
$WHT = "\x1B[37;1m";
$NRM = "\x1B[0m";
} else {
$WHT = "";
$NRM = "";
$config_use_color = 2;
}
while ( ( $command ne "q" ) && ( $command ne "Q" ) ) {
system "clear";
print $WHT. "SquirrelMail Configuration : " . $NRM;
if ( $config == 1 ) { print "Read: config.php"; }
elsif ( $config == 2 ) { print "Read: config_default.php"; }
print " ($print_config_version)\n";
print "---------------------------------------------------------\n";
if ( $menu == 0 ) {
print $WHT. "Main Menu --\n" . $NRM;
print "1. Organization Preferences\n";
print "2. Server Settings\n";
print "3. Folder Defaults\n";
print "4. General Options\n";
print "5. Themes\n";
print "6. Address Books (LDAP)\n";
print "7. Message of the Day (MOTD)\n";
print "8. Plugins\n";
print "9. Database\n";
print "\n";
print "D. Set pre-defined settings for specific IMAP servers\n";
print "\n";
} elsif ( $menu == 1 ) {
print $WHT. "Organization Preferences\n" . $NRM;
print "1. Organization Name : $WHT$org_name$NRM\n";
print "2. Organization Logo : $WHT$org_logo$NRM\n";
print "3. Org. Logo Width/Height : $WHT($org_logo_width/$org_logo_height)$NRM\n";
print "4. Organization Title : $WHT$org_title$NRM\n";
print "5. Signout Page : $WHT$signout_page$NRM\n";
print "6. Default Language : $WHT$squirrelmail_default_language$NRM\n";
print "7. Top Frame : $WHT$frame_top$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 2 ) {
print $WHT. "Server Settings\n" . $NRM;
print "1. Domain : $WHT$domain$NRM\n";
print "2. IMAP Server : $WHT$imapServerAddress$NRM\n";
print "3. IMAP Port : $WHT$imapPort$NRM\n";
print "4. Use Sendmail/SMTP : $WHT";
if ( lc($useSendmail) eq "true" ) {
print "Sendmail";
} else {
print "SMTP";
}
print "$NRM\n";
if ( lc($useSendmail) eq "true" ) {
print "5. Sendmail Path : $WHT$sendmail_path$NRM\n";
} else {
print "6. SMTP Server : $WHT$smtpServerAddress$NRM\n";
print "7. SMTP Port : $WHT$smtpPort$NRM\n";
print "8. Authenticated SMTP : $WHT$use_authenticated_smtp$NRM\n";
print "9. POP Before SMTP : $WHT$pop_before_smtp$NRM\n";
}
print "10. Server : $WHT$imap_server_type$NRM\n";
print "11. Invert Time : $WHT$invert_time$NRM\n";
print "12. Delimiter : $WHT$optional_delimiter$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 3 ) {
print $WHT. "Folder Defaults\n" . $NRM;
print "1. Default Folder Prefix : $WHT$default_folder_prefix$NRM\n";
print "2. Show Folder Prefix Option : $WHT$show_prefix_option$NRM\n";
print "3. Trash Folder : $WHT$trash_folder$NRM\n";
print "4. Sent Folder : $WHT$sent_folder$NRM\n";
print "5. Drafts Folder : $WHT$draft_folder$NRM\n";
print "6. By default, move to trash : $WHT$default_move_to_trash$NRM\n";
print "7. By default, move to sent : $WHT$default_move_to_sent$NRM\n";
print "8. By default, save as draft : $WHT$default_save_as_draft$NRM\n";
print "9. List Special Folders First : $WHT$list_special_folders_first$NRM\n";
print "10. Show Special Folders Color : $WHT$use_special_folder_color$NRM\n";
print "11. Auto Expunge : $WHT$auto_expunge$NRM\n";
print "12. Default Sub. of INBOX : $WHT$default_sub_of_inbox$NRM\n";
print "13. Show 'Contain Sub.' Option : $WHT$show_contain_subfolders_option$NRM\n";
print "14. Default Unseen Notify : $WHT$default_unseen_notify$NRM\n";
print "15. Default Unseen Type : $WHT$default_unseen_type$NRM\n";
print "16. Auto Create Special Folders : $WHT$auto_create_special$NRM\n";
print "17. Don't move folders into Trash : $WHT$delete_folder$NRM\n";
print "18. Enable /NoSelect folder fix : $WHT$noselect_fix_enable$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 4 ) {
print $WHT. "General Options\n" . $NRM;
print "1. Default Charset : $WHT$default_charset$NRM\n";
print "2. Data Directory : $WHT$data_dir$NRM\n";
print "3. Attachment Directory : $WHT$attachment_dir$NRM\n";
print "4. Directory Hash Level : $WHT$dir_hash_level$NRM\n";
print "5. Default Left Size : $WHT$default_left_size$NRM\n";
print "6. Usernames in Lowercase : $WHT$force_username_lowercase$NRM\n";
print "7. Allow use of priority : $WHT$default_use_priority$NRM\n";
print "8. Hide SM attributions : $WHT$hide_sm_attributions$NRM\n";
print "9. Allow use of receipts : $WHT$default_use_mdn$NRM\n";
print "10. Allow editing of identity : $WHT$edit_identity$NRM\n";
print "11. Allow server thread sort : $WHT$allow_thread_sort$NRM\n";
print "12. Allow server-side sorting : $WHT$allow_server_sort$NRM\n";
if ( lc($edit_identity) eq "false" ) {
print "13. Allow editing of name : $WHT$edit_name$NRM\n";
}
print "14. Allow server charset search : $WHT$allow_charset_search$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 5 ) {
print $WHT. "Themes\n" . $NRM;
print "1. Change Themes\n";
for ( $count = 0 ; $count <= $#theme_name ; $count++ ) {
print " > $theme_name[$count]\n";
}
print "2. CSS File : $WHT$theme_css$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 6 ) {
print $WHT. "Address Books (LDAP)\n" . $NRM;
print "1. Change Servers\n";
for ( $count = 0 ; $count <= $#ldap_host ; $count++ ) {
print " > $ldap_host[$count]\n";
}
print
"2. Use Javascript Address Book Search : $WHT$default_use_javascript_addr_book$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 7 ) {
print $WHT. "Message of the Day (MOTD)\n" . $NRM;
print "\n$motd\n";
print "\n";
print "1 Edit the MOTD\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 8 ) {
print $WHT. "Plugins\n" . $NRM;
print " Installed Plugins\n";
$num = 0;
for ( $count = 0 ; $count <= $#plugins ; $count++ ) {
$num = $count + 1;
print " $num. $plugins[$count]\n";
}
print "\n Available Plugins:\n";
opendir( DIR, "../plugins" );
@files = readdir(DIR);
$pos = 0;
@unused_plugins = ();
for ( $i = 0 ; $i <= $#files ; $i++ ) {
if ( -d "../plugins/" . $files[$i] && $files[$i] !~ /^\./ && $files[$i] ne "CVS" ) {
$match = 0;
for ( $k = 0 ; $k <= $#plugins ; $k++ ) {
if ( $plugins[$k] eq $files[$i] ) {
$match = 1;
}
}
if ( $match == 0 ) {
$unused_plugins[$pos] = $files[$i];
$pos++;
}
}
}
for ( $i = 0 ; $i <= $#unused_plugins ; $i++ ) {
$num = $num + 1;
print " $num. $unused_plugins[$i]\n";
}
closedir DIR;
print "\n";
print "A Sanitize all plugins for use with Squirrelmail 1.2\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 9 ) {
print $WHT. "Database\n" . $NRM;
print "1. DSN for Address Book : $WHT$addrbook_dsn$NRM\n";
print "2. Table for Address Book : $WHT$addrbook_table$NRM\n";
print "\n";
print "3. DSN for Preferences : $WHT$prefs_dsn$NRM\n";
print "4. Table for Preferences : $WHT$prefs_table$NRM\n";
print "5. Field for username : $WHT$prefs_user_field$NRM\n";
print "6. Field for prefs key : $WHT$prefs_key_field$NRM\n";
print "7. Field for prefs value : $WHT$prefs_val_field$NRM\n";
print "\n";
print "R Return to Main Menu\n";
}
if ( $config_use_color == 1 ) {
print "C. Turn color off\n";
} else {
print "C. Turn color on\n";
}
print "S Save data\n";
print "Q Quit\n";
print "\n";
print "Command >> " . $WHT;
$command = ;
$command =~ s/[\n|\r]//g;
$command =~ tr/A-Z/a-z/;
print "$NRM\n";
# Read the commands they entered.
if ( $command eq "r" ) {
$menu = 0;
} elsif ( $command eq "s" ) {
save_data();
print "Press enter to continue...";
$tmp = ;
$saved = 1;
} elsif ( ( $command eq "q" ) && ( $saved == 0 ) ) {
print "You have not saved your data.\n";
print "Save? [" . $WHT . "Y" . $NRM . "/n]: ";
$save = ;
if ( ( $save =~ /^y/i ) || ( $save =~ /^\s*$/ ) ) {
save_data();
}
} elsif ( $command eq "c" ) {
if ( $config_use_color == 1 ) {
$config_use_color = 2;
$WHT = "";
$NRM = "";
} else {
$config_use_color = 1;
$WHT = "\x1B[37;1m";
$NRM = "\x1B[0m";
}
} elsif ( $command eq "d" && $menu == 0 ) {
set_defaults();
} else {
$saved = 0;
if ( $menu == 0 ) {
if ( ( $command > 0 ) && ( $command < 10 ) ) {
$menu = $command;
}
} elsif ( $menu == 1 ) {
if ( $command == 1 ) { $org_name = command1(); }
elsif ( $command == 2 ) { $org_logo = command2(); }
elsif ( $command == 3 ) { ($org_logo_width,$org_logo_height) = command2a(); }
elsif ( $command == 4 ) { $org_title = command3(); }
elsif ( $command == 5 ) { $signout_page = command4(); }
elsif ( $command == 6 ) { $squirrelmail_default_language = command5(); }
elsif ( $command == 7 ) { $frame_top = command6(); }
} elsif ( $menu == 2 ) {
if ( $command == 1 ) { $domain = command11(); }
elsif ( $command == 2 ) { $imapServerAddress = command12(); }
elsif ( $command == 3 ) { $imapPort = command13(); }
elsif ( $command == 4 ) { $useSendmail = command14(); }
elsif ( $command == 5 ) { $sendmail_path = command15(); }
elsif ( $command == 6 ) { $smtpServerAddress = command16(); }
elsif ( $command == 7 ) { $smtpPort = command17(); }
elsif ( $command == 8 ) { $use_authenticated_smtp = command18(); }
elsif ( $command == 9 ) { $pop_before_smtp = command18a(); }
elsif ( $command == 10 ) { $imap_server_type = command19(); }
elsif ( $command == 11 ) { $invert_time = command110(); }
elsif ( $command == 12 ) { $optional_delimiter = command111(); }
} elsif ( $menu == 3 ) {
if ( $command == 1 ) { $default_folder_prefix = command21(); }
elsif ( $command == 2 ) { $show_prefix_option = command22(); }
elsif ( $command == 3 ) { $trash_folder = command23a(); }
elsif ( $command == 4 ) { $sent_folder = command23b(); }
elsif ( $command == 5 ) { $draft_folder = command23c(); }
elsif ( $command == 6 ) { $default_move_to_trash = command24a(); }
elsif ( $command == 7 ) { $default_move_to_sent = command24b(); }
elsif ( $command == 8 ) { $default_save_as_draft = command24c(); }
elsif ( $command == 9 ) { $list_special_folders_first = command27(); }
elsif ( $command == 10 ) { $use_special_folder_color = command28(); }
elsif ( $command == 11 ) { $auto_expunge = command29(); }
elsif ( $command == 12 ) { $default_sub_of_inbox = command210(); }
elsif ( $command == 13 ) { $show_contain_subfolders_option = command211(); }
elsif ( $command == 14 ) { $default_unseen_notify = command212(); }
elsif ( $command == 15 ) { $default_unseen_type = command213(); }
elsif ( $command == 16 ) { $auto_create_special = command214(); }
elsif ( $command == 17 ) { $delete_folder = command215(); }
elsif ( $command == 18 ) { $noselect_fix_enable = command216(); }
} elsif ( $menu == 4 ) {
if ( $command == 1 ) { $default_charset = command31(); }
elsif ( $command == 2 ) { $data_dir = command33a(); }
elsif ( $command == 3 ) { $attachment_dir = command33b(); }
elsif ( $command == 4 ) { $dir_hash_level = command33c(); }
elsif ( $command == 5 ) { $default_left_size = command35(); }
elsif ( $command == 6 ) { $force_username_lowercase = command36(); }
elsif ( $command == 7 ) { $default_use_priority = command37(); }
elsif ( $command == 8 ) { $hide_sm_attributions = command38(); }
elsif ( $command == 9 ) { $default_use_mdn = command39(); }
elsif ( $command == 10 ) { $edit_identity = command310(); }
elsif ( $command == 11 ) { $allow_thread_sort = command312(); }
elsif ( $command == 12 ) { $allow_server_sort = command313(); }
elsif ( $command == 13 ) { $edit_name = command311(); }
elsif ( $command == 14 ) { $allow_charset_search = command314(); }
} elsif ( $menu == 5 ) {
if ( $command == 1 ) { command41(); }
elsif ( $command == 2 ) { $theme_css = command42(); }
} elsif ( $menu == 6 ) {
if ( $command == 1 ) { command61(); }
elsif ( $command == 2 ) { command62(); }
} elsif ( $menu == 7 ) {
if ( $command == 1 ) { $motd = command71(); }
} elsif ( $menu == 8 ) {
if ( $command =~ /^[0-9]+/ ) { @plugins = command81(); }
elsif ( $command eq "a" ) { command8s(); }
} elsif ( $menu == 9 ) {
if ( $command == 1 ) { $addrbook_dsn = command91(); }
elsif ( $command == 2 ) { $addrbook_table = command92(); }
elsif ( $command == 3 ) { $prefs_dsn = command93(); }
elsif ( $command == 4 ) { $prefs_table = command94(); }
elsif ( $command == 5 ) { $prefs_user_field = command95(); }
elsif ( $command == 6 ) { $prefs_key_field = command96(); }
elsif ( $command == 7 ) { $prefs_val_field = command97(); }
}
}
}
####################################################################################
# org_name
sub command1 {
print "We have tried to make the name SquirrelMail as transparent as\n";
print "possible. If you set up an organization name, most places where\n";
print "SquirrelMail would take credit will be credited to your organization.\n";
print "\n";
print "[$WHT$org_name$NRM]: $WHT";
$new_org_name = ;
if ( $new_org_name eq "\n" ) {
$new_org_name = $org_name;
} else {
$new_org_name =~ s/[\r|\n]//g;
$new_org_name =~ s/\"/"/g;
}
return $new_org_name;
}
# org_logo
sub command2 {
print "Your organization's logo is an image that will be displayed at\n";
print "different times throughout SquirrelMail. This is asking for the\n";
print "literal (/usr/local/squirrelmail/images/logo.png) or relative\n";
print "(../images/logo.png) path to your logo.\n";
print "\n";
print "[$WHT$org_logo$NRM]: $WHT";
$new_org_logo = ;
if ( $new_org_logo eq "\n" ) {
$new_org_logo = $org_logo;
} else {
$new_org_logo =~ s/[\r|\n]//g;
}
return $new_org_logo;
}
# org_logo_width
sub command2a {
print "Your organization's logo is an image that will be displayed at\n";
print "different times throughout SquirrelMail. Width\n";
print "and Height of your logo image. Use '0' to disable.\n";
print "\n";
print "Width: [$WHT$org_logo_width$NRM]: $WHT";
$new_org_logo_width = ;
$new_org_logo_width =~ tr/0-9//cd; # only want digits!
if ( $new_org_logo_width eq '' ) {
$new_org_logo_width = $org_logo_width;
}
if ( $new_org_logo_width > 0 ) {
print "Height: [$WHT$org_logo_height$NRM]: $WHT";
$new_org_logo_height = ;
$new_org_logo_height =~ tr/0-9//cd; # only want digits!
if( $new_org_logo_height eq '' ) {
$new_org_logo_height = $org_logo_height;
}
} else {
$new_org_logo_height = 0;
}
return ($new_org_logo_width, $new_org_logo_height);
}
# org_title
sub command3 {
print "A title is what is displayed at the top of the browser window in\n";
print "the titlebar. Usually this will end up looking something like:\n";
print "\"Netscape: $org_title\"\n";
print "\n";
print "[$WHT$org_title$NRM]: $WHT";
$new_org_title = ;
if ( $new_org_title eq "\n" ) {
$new_org_title = $org_title;
} else {
$new_org_title =~ s/[\r|\n]//g;
$new_org_title =~ s/\"/\'/g;
}
return $new_org_title;
}
# signout_page
sub command4 {
print "When users click the Sign Out button they will be logged out and\n";
print "then sent to signout_page. If signout_page is left empty,\n";
print "(hit space and then return) they will be taken, as normal,\n";
print "to the default and rather sparse SquirrelMail signout page.\n";
print "\n";
print "[$WHT$signout_page$NRM]: $WHT";
$new_signout_page = ;
if ( $new_signout_page eq "\n" ) {
$new_signout_page = $signout_page;
} else {
$new_signout_page =~ s/[\r|\n]//g;
$new_signout_page =~ s/^\s+$//g;
}
return $new_signout_page;
}
# Default language
sub command5 {
print "SquirrelMail attempts to set the language in many ways. If it\n";
print "can not figure it out in another way, it will default to this\n";
print "language. Please use the code for the desired language.\n";
print "\n";
print "[$WHT$squirrelmail_default_language$NRM]: $WHT";
$new_signout_page = ;
if ( $new_signout_page eq "\n" ) {
$new_signout_page = $squirrelmail_default_language;
} else {
$new_signout_page =~ s/[\r|\n]//g;
$new_signout_page =~ s/^\s+$//g;
}
return $new_signout_page;
}
# Default top frame
sub command6 {
print "SquirrelMail defaults to using the whole of the browser window.\n";
print "This allows you to keep it within a specified frame. The default\n";
print "is '_top'\n";
print "\n";
print "[$WHT$frame_top$NRM]: $WHT";
$new_frame_top = ;
if ( $new_frame_top eq "\n" ) {
$new_frame_top = '_top';
} else {
$new_frame_top =~ s/[\r|\n]//g;
$new_frame_top =~ s/^\s+$//g;
}
return $new_frame_top;
}
####################################################################################
# domain
sub command11 {
print "The domain name is the suffix at the end of all email addresses. If\n";
print "for example, your email address is jdoe\@myorg.com, then your domain\n";
print "would be myorg.com.\n";
print "\n";
print "[$WHT$domain$NRM]: $WHT";
$new_domain = ;
if ( $new_domain eq "\n" ) {
$new_domain = $domain;
} else {
$new_domain =~ s/[\r|\n]//g;
}
return $new_domain;
}
# imapServerAddress
sub command12 {
print "This is the address where your IMAP server resides.\n";
print "[$WHT$imapServerAddress$NRM]: $WHT";
$new_imapServerAddress = ;
if ( $new_imapServerAddress eq "\n" ) {
$new_imapServerAddress = $imapServerAddress;
} else {
$new_imapServerAddress =~ s/[\r|\n]//g;
}
return $new_imapServerAddress;
}
# imapPort
sub command13 {
print "This is the port that your IMAP server is on. Usually this is 143.\n";
print "[$WHT$imapPort$NRM]: $WHT";
$new_imapPort = ;
if ( $new_imapPort eq "\n" ) {
$new_imapPort = $imapPort;
} else {
$new_imapPort =~ s/[\r|\n]//g;
}
return $new_imapPort;
}
# useSendmail
sub command14 {
print "You now need to choose the method that you will use for sending\n";
print "messages in SquirrelMail. You can either connect to an SMTP server\n";
print "or use sendmail directly.\n";
if ( lc($useSendmail) eq "true" ) {
$default_value = "1";
} else {
$default_value = "2";
}
print "\n";
print " 1. Sendmail\n";
print " 2. SMTP\n";
print "Your choice [1/2] [$WHT$default_value$NRM]: $WHT";
$use_sendmail = ;
if ( ( $use_sendmail =~ /^1\n/i )
|| ( ( $use_sendmail =~ /^\n/ ) && ( $default_value eq "1" ) ) ) {
$useSendmail = "true";
} else {
$useSendmail = "false";
}
return $useSendmail;
}
# sendmail_path
sub command15 {
if ( $sendmail_path[0] !~ /./ ) {
$sendmail_path = "/usr/sbin/sendmail";
}
print "Specify where the sendmail executable is located. Usually /usr/sbin/sendmail\n";
print "[$WHT$sendmail_path$NRM]: $WHT";
$new_sendmail_path = ;
if ( $new_sendmail_path eq "\n" ) {
$new_sendmail_path = $sendmail_path;
} else {
$new_sendmail_path =~ s/[\r|\n]//g;
}
return $new_sendmail_path;
}
# smtpServerAddress
sub command16 {
print "This is the location of your SMTP server.\n";
print "[$WHT$smtpServerAddress$NRM]: $WHT";
$new_smtpServerAddress = ;
if ( $new_smtpServerAddress eq "\n" ) {
$new_smtpServerAddress = $smtpServerAddress;
} else {
$new_smtpServerAddress =~ s/[\r|\n]//g;
}
return $new_smtpServerAddress;
}
# smtpPort
sub command17 {
print "This is the port to connect to for SMTP. Usually 25.\n";
print "[$WHT$smtpPort$NRM]: $WHT";
$new_smtpPort = ;
if ( $new_smtpPort eq "\n" ) {
$new_smtpPort = $smtpPort;
} else {
$new_smtpPort =~ s/[\r|\n]//g;
}
return $new_smtpPort;
}
# authenticated server
sub command18 {
print "Do you wish to use an authenticated SMTP server? Your server must\n";
print "support this in order for SquirrelMail to work with it. We implemented\n";
print "it according to RFC 2554.\n";
$YesNo = 'n';
$YesNo = 'y' if ( lc($use_authenticated_smtp) eq "true" );
print "Use authenticated SMTP server (y/n) [$WHT$YesNo$NRM]: $WHT";
$new_use_authenticated_smtp = ;
$new_use_authenticated_smtp =~ tr/yn//cd;
return "true" if ( $new_use_authenticated_smtp eq "y" );
return "false" if ( $new_use_authenticated_smtp eq "n" );
return $use_authenticated_smtp;
}
# pop before SMTP
sub command18a {
print "Do you wish to use POP3 before SMTP? Your server must\n";
print "support this in order for SquirrelMail to work with it.\n";
$YesNo = 'n';
$YesNo = 'y' if ( lc($pop_before_smtp) eq "true" );
print "Use pop before SMTP (y/n) [$WHT$YesNo$NRM]: $WHT";
$new_pop_before_smtp = ;
$new_pop_before_smtp =~ tr/yn//cd;
return "true" if ( $new_pop_before_smtp eq "y" );
return "false" if ( $new_pop_before_smtp eq "n" );
return $pop_before_smtp;
}
# imap_server_type
sub command19 {
print "Each IMAP server has its own quirks. As much as we tried to stick\n";
print "to standards, it doesn't help much if the IMAP server doesn't follow\n";
print "the same principles. We have made some work-arounds for some of\n";
print "these servers. If you would like to use them, please select your\n";
print "IMAP server. If you do not wish to use these work-arounds, you can\n";
print "set this to \"other\", and none will be used.\n";
print " cyrus = Cyrus IMAP server\n";
print " uw = University of Washington's IMAP server\n";
print " exchange = Microsoft Exchange IMAP server\n";
print " courier = Courier IMAP server\n";
print " macosx = Mac OS X Mailserver\n";
print " other = Not one of the above servers\n";
print "[$WHT$imap_server_type$NRM]: $WHT";
$new_imap_server_type = ;
if ( $new_imap_server_type eq "\n" ) {
$new_imap_server_type = $imap_server_type;
} else {
$new_imap_server_type =~ s/[\r|\n]//g;
}
return $new_imap_server_type;
}
# invert_time
sub command110 {
print "Sometimes the date of messages sent is messed up (off by a few hours\n";
print "on some machines). Typically this happens if the system doesn't support\n";
print "tm_gmtoff. It will happen only if your time zone is \"negative\".\n";
print "This most often occurs on Solaris 7 machines in the United States.\n";
print "By default, this is off. It should be kept off unless problems surface\n";
print "about the time that messages are sent.\n";
print " no = Do NOT fix time -- almost always correct\n";
print " yes = Fix the time for this system\n";
$YesNo = 'n';
$YesNo = 'y' if ( lc($invert_time) eq "true" );
print "Fix the time for this system (y/n) [$WHT$YesNo$NRM]: $WHT";
$new_invert_time = ;
$new_invert_time =~ tr/yn//cd;
return "true" if ( $new_invert_time eq "y" );
return "false" if ( $new_invert_time eq "n" );
return $invert_time;
}
sub command111 {
print "This is the delimiter that your IMAP server uses to distinguish between\n";
print "folders. For example, Cyrus uses '.' as the delimiter and a complete\n";
print "folder would look like 'INBOX.Friends.Bob', while UW uses '/' and would\n";
print "look like 'INBOX/Friends/Bob'. Normally this should be left at 'detect'\n";
print "but if you are sure you know what delimiter your server uses, you can\n";
print "specify it here.\n";
print "\nTo have it autodetect the delimiter, set it to 'detect'.\n\n";
print "[$WHT$optional_delimiter$NRM]: $WHT";
$new_optional_delimiter = ;
if ( $new_optional_delimiter eq "\n" ) {
$new_optional_delimiter = $optional_delimiter;
} else {
$new_optional_delimiter =~ s/[\r|\n]//g;
}
return $new_optional_delimiter;
}
# MOTD
sub command71 {
print "\nYou can now create the welcome message that is displayed\n";
print "every time a user logs on. You can use HTML or just plain\n";
print
"text. If you do not wish to have one, just make it blank.\n\n(Type @ on a blank line to exit)\n";
$new_motd = "";
do {
print "] ";
$line = ;
$line =~ s/[\r|\n]//g;
if ( $line ne "@" ) {
$line =~ s/ /\ \ /g;
$line =~ s/\t/\ \ \ \ /g;
$line =~ s/$/ /;
$line =~ s/\"/"/g;
$new_motd = $new_motd . $line;
}
} while ( $line ne "@" );
return $new_motd;
}
################# PLUGINS ###################
sub command81 {
$command =~ s/[\s|\n|\r]*//g;
if ( $command > 0 ) {
$command = $command - 1;
if ( $command <= $#plugins ) {
@newplugins = ();
$ct = 0;
while ( $ct <= $#plugins ) {
if ( $ct != $command ) {
@newplugins = ( @newplugins, $plugins[$ct] );
}
$ct++;
}
@plugins = @newplugins;
} elsif ( $command <= $#plugins + $#unused_plugins + 1 ) {
$num = $command - $#plugins - 1;
@newplugins = @plugins;
$ct = 0;
while ( $ct <= $#unused_plugins ) {
if ( $ct == $num ) {
@newplugins = ( @newplugins, $unused_plugins[$ct] );
# sanitize the plugin
$dir = $unused_plugins[$ct];
if (-d "../plugins/$dir") {
`./ri_once.pl ../plugins/$dir`;
} else {
print "Could not locate ../plugins/$dir\n" ;
print "The plugin $dir could *not* be sanitized!\n" ;
print "If you want to try to do this manually, please run\n" ;
print "config/ri_once.pl with the full path to the $dir plugin.\n" ;
}
}
$ct++;
}
@plugins = @newplugins;
}
}
return @plugins;
}
sub command8s {
print "This command will sanitize all plugins for use with\n";
print "Squirrelmail 1.2. That is, it will rewrite some php-\n";
print "constructs that are *incompatible* with the 1.2 design\n";
print "into ones that are *compatible*\n";
print "Do you wish to issue this command [y/N]? ";
$ctu = ;
if ( $ctu =~ /^y\n/i ) {
`./ri_once.pl ../plugins`;
}
}
################# FOLDERS ###################
# default_folder_prefix
sub command21 {
print "Some IMAP servers (UW, for example) store mail and folders in\n";
print "your user space in a separate subdirectory. This is where you\n";
print "specify what that directory is.\n";
print "\n";
print "EXAMPLE: mail/";
print "\n";
print "NOTE: If you use Cyrus, or some server that would not use this\n";
print " option, you must set this to 'none'.\n";
print "\n";
print "[$WHT$default_folder_prefix$NRM]: $WHT";
$new_default_folder_prefix = ;
if ( $new_default_folder_prefix eq "\n" ) {
$new_default_folder_prefix = $default_folder_prefix;
} else {
$new_default_folder_prefix =~ s/[\r\n]//g;
}
if ( ( $new_default_folder_prefix =~ /^\s*$/ ) || ( $new_default_folder_prefix =~ m/^none$/i ) ) {
$new_default_folder_prefix = "";
} else {
# add the trailing delimiter only if we know what the server is.
if (($imap_server_type eq 'cyrus' and
$optional_delimiter eq 'detect') or
($imap_server_type eq 'courier' and
$optional_delimiter eq 'detect')) {
$new_default_folder_prefix =~ s/\.*$/\./;
} elsif ($imap_server_type eq 'uw' and
$optional_delimiter eq 'detect') {
$new_default_folder_prefix =~ s/\/*$/\//;
}
}
return $new_default_folder_prefix;
}
# Show Folder Prefix
sub command22 {
print "It is possible to set up the default folder prefix as a user\n";
print "specific option, where each user can specify what their mail\n";
print "folder is. If you set this to false, they will never see the\n";
print "option, but if it is true, this option will appear in the\n";
print "'options' section.\n";
print "\n";
print "NOTE: You set the default folder prefix in option '1' of this\n";
print " section. That will be the default if the user doesn't\n";
print " specify anything different.\n";
print "\n";
if ( lc($show_prefix_option) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "\n";
print "Show option (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$show_prefix_option = "true";
} else {
$show_prefix_option = "false";
}
return $show_prefix_option;
}
# Trash Folder
sub command23a {
print "You can now specify where the default trash folder is located.\n";
print "On servers where you do not want this, you can set it to anything\n";
print "and set option 6 to false.\n";
print "\n";
print "This is relative to where the rest of your email is kept. You do\n";
print "not need to worry about their mail directory. If this folder\n";
print "would be ~/mail/trash on the filesystem, you only need to specify\n";
print "that this is 'trash', and be sure to put 'mail/' in option 1.\n";
print "\n";
print "[$WHT$trash_folder$NRM]: $WHT";
$new_trash_folder = ;
if ( $new_trash_folder eq "\n" ) {
$new_trash_folder = $trash_folder;
} else {
$new_trash_folder =~ s/[\r|\n]//g;
}
return $new_trash_folder;
}
# Sent Folder
sub command23b {
print "This is where messages that are sent will be stored. SquirrelMail\n";
print "by default puts a copy of all outgoing messages in this folder.\n";
print "\n";
print "This is relative to where the rest of your email is kept. You do\n";
print "not need to worry about their mail directory. If this folder\n";
print "would be ~/mail/sent on the filesystem, you only need to specify\n";
print "that this is 'sent', and be sure to put 'mail/' in option 1.\n";
print "\n";
print "[$WHT$sent_folder$NRM]: $WHT";
$new_sent_folder = ;
if ( $new_sent_folder eq "\n" ) {
$new_sent_folder = $sent_folder;
} else {
$new_sent_folder =~ s/[\r|\n]//g;
}
return $new_sent_folder;
}
# Draft Folder
sub command23c {
print "You can now specify where the default draft folder is located.\n";
print "On servers where you do not want this, you can set it to anything\n";
print "and set option 9 to false.\n";
print "\n";
print "This is relative to where the rest of your email is kept. You do\n";
print "not need to worry about their mail directory. If this folder\n";
print "would be ~/mail/drafts on the filesystem, you only need to specify\n";
print "that this is 'drafts', and be sure to put 'mail/' in option 1.\n";
print "\n";
print "[$WHT$draft_folder$NRM]: $WHT";
$new_draft_folder = ;
if ( $new_draft_folder eq "\n" ) {
$new_draft_folder = $draft_folder;
} else {
$new_draft_folder =~ s/[\r|\n]//g;
}
return $new_draft_folder;
}
# default move to trash
sub command24a {
print "By default, should messages get moved to the trash folder? You\n";
print "can specify the default trash folder in option 3. If this is set\n";
print "to false, messages will get deleted immediately without moving\n";
print "to the trash folder.\n";
print "\n";
print "Trash folder is currently: $trash_folder\n";
print "\n";
if ( lc($default_move_to_trash) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "By default, move to trash (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$default_move_to_trash = "true";
} else {
$default_move_to_trash = "false";
}
return $default_move_to_trash;
}
# default move to sent
sub command24b {
print "By default, should messages get moved to the sent folder? You\n";
print "can specify the default sent folder in option 4. If this is set\n";
print "to false, messages will get sent and no copy will be made.\n";
print "\n";
print "Sent folder is currently: $sent_folder\n";
print "\n";
if ( lc($default_move_to_sent) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "By default, move to sent (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$default_move_to_sent = "true";
} else {
$default_move_to_sent = "false";
}
return $default_move_to_sent;
}
# default save as draft
sub command24c {
print "By default, should the save to draft option be shown? You can\n";
print "specify the default drafts folder in option 5. If this is set\n";
print "to false, users will not be shown the save to draft option.\n";
print "\n";
print "Drafts folder is currently: $draft_folder\n";
print "\n";
if ( lc($default_move_to_draft) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "By default, save as draft (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$default_save_as_draft = "true";
} else {
$default_save_as_draft = "false";
}
return $default_save_as_draft;
}
# List special folders first
sub command27 {
print "SquirrelMail has what we call 'special folders' that are not\n";
print "manipulated and viewed like normal folders. Some examples of\n";
print "these folders would be INBOX, Trash, Sent, etc. This option\n";
print "Simply asks if you want these folders listed first in the folder\n";
print "listing.\n";
print "\n";
if ( lc($list_special_folders_first) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "\n";
print "List first (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$list_special_folders_first = "true";
} else {
$list_special_folders_first = "false";
}
return $list_special_folders_first;
}
# Show special folders color
sub command28 {
print "SquirrelMail has what we call 'special folders' that are not\n";
print "manipulated and viewed like normal folders. Some examples of\n";
print "these folders would be INBOX, Trash, Sent, etc. This option\n";
print "wants to know if we should display special folders in a\n";
print "color than the other folders.\n";
print "\n";
if ( lc($use_special_folder_color) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "\n";
print "Show color (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$use_special_folder_color = "true";
} else {
$use_special_folder_color = "false";
}
return $use_special_folder_color;
}
# Auto expunge
sub command29 {
print "The way that IMAP handles deleting messages is as follows. You\n";
print "mark the message as deleted, and then to 'really' delete it, you\n";
print "expunge it. This option asks if you want to just have messages\n";
print "marked as deleted, or if you want SquirrelMail to expunge the \n";
print "messages too.\n";
print "\n";
if ( lc($auto_expunge) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Auto expunge (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$auto_expunge = "true";
} else {
$auto_expunge = "false";
}
return $auto_expunge;
}
# Default sub of inbox
sub command210 {
print "Some IMAP servers (Cyrus) have all folders as subfolders of INBOX.\n";
print "This can cause some confusion in folder creation for users when\n";
print "they try to create folders and don't put it as a subfolder of INBOX\n";
print "and get permission errors. This option asks if you want folders\n";
print "to be subfolders of INBOX by default.\n";
print "\n";
if ( lc($default_sub_of_inbox) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Default sub of INBOX (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$default_sub_of_inbox = "true";
} else {
$default_sub_of_inbox = "false";
}
return $default_sub_of_inbox;
}
# Show contain subfolder option
sub command211 {
print "Some IMAP servers (UW) make it so that there are two types of\n";
print "folders. Those that contain messages, and those that contain\n";
print "subfolders. If this is the case for your server, set this to\n";
print "true, and it will ask the user whether the folder they are\n";
print "creating contains subfolders or messages.\n";
print "\n";
if ( lc($show_contain_subfolders_option) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Show option (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$show_contain_subfolders_option = "true";
} else {
$show_contain_subfolders_option = "false";
}
return $show_contain_subfolders_option;
}
# Default Unseen Notify
sub command212 {
print "This option specifies where the users will receive notification\n";
print "about unseen messages by default. This is of course an option that\n";
print "can be changed on a user level.\n";
print " 1 = No notification\n";
print " 2 = Only on the INBOX\n";
print " 3 = On all folders\n";
print "\n";
print "Which one should be default (1,2,3)? [$WHT$default_unseen_notify$NRM]: $WHT";
$new_show = ;
if ( $new_show =~ /^[1|2|3]\n/i ) {
$default_unseen_notify = $new_show;
}
$default_unseen_notify =~ s/[\r|\n]//g;
return $default_unseen_notify;
}
# Default Unseen Type
sub command213 {
print "Here you can define the default way that unseen messages will be displayed\n";
print "to the user in the folder listing on the left side.\n";
print " 1 = Only unseen messages (4)\n";
print " 2 = Unseen and Total messages (4/27)\n";
print "\n";
print "Which one should be default (1,2)? [$WHT$default_unseen_type$NRM]: $WHT";
$new_show = ;
if ( $new_show =~ /^[1|2]\n/i ) {
$default_unseen_type = $new_show;
}
$default_unseen_type =~ s/[\r|\n]//g;
return $default_unseen_type;
}
# Auto create special folders
sub command214 {
print "Would you like the Sent, Trash, and Drafts folders to be created\n";
print "automatically print for you when a user logs in? If the user\n";
print "accidentally deletes their special folders, this option will\n";
print "automatically create it again for them.\n";
print "\n";
if ( lc($auto_create_special) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Auto create special folders? (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$auto_create_special = "true";
} else {
$auto_create_special = "false";
}
return $auto_create_special;
}
# Auto create special folders
sub command215 {
print "Would you like to automatically completely delete any deleted\n";
print "folders? If not then they will be moved to the Trash folder\n";
print "and can be deleted from there\n";
print "\n";
if ( lc($delete_folder) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Auto delete folders? (y/n) [$WHT$default_value$NRM]: $WHT";
$new_delete = ;
if ( ( $new_delete =~ /^y\n/i ) || ( ( $new_delete =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$delete_folder = "true";
} else {
$delete_folder = "false";
}
return $delete_folder;
}
#noselect fix
sub command216 {
print "Some IMAP server allow subfolders to exist even if the parent\n";
print "folders do not. This fixes some problems with the folder list\n";
print "when this is the case, causing the /NoSelect folders to be displayed\n";
print "\n";
if ( lc($noselect_fix_enable) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "enable noselect fix? (y/n) [$WHT$noselect_fix_enable$NRM]: $WHT";
$noselect_fix_enable = ;
if ( ( $noselect_fix_enable =~ /^y\n/i ) || ( ( $noselect_fix_enable =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$noselect_fix_enable = "true";
} else {
$noselect_fix_enable = "false";
}
return $noselect_fix_enable;
}
############# GENERAL OPTIONS #####################
# Default Charset
sub command31 {
print "This option controls what character set is used when sending\n";
print "mail and when sending HTML to the browser. Do not set this\n";
print "to US-ASCII, use ISO-8859-1 instead. For cyrillic, it is best\n";
print "to use KOI8-R, since this implementation is faster than most\n";
print "of the alternatives\n";
print "\n";
print "[$WHT$default_charset$NRM]: $WHT";
$new_default_charset = ;
if ( $new_default_charset eq "\n" ) {
$new_default_charset = $default_charset;
} else {
$new_default_charset =~ s/[\r|\n]//g;
}
return $new_default_charset;
}
# Data directory
sub command33a {
print "It is a possible security hole to have a writable directory\n";
print "under the web server's root directory (ex: /home/httpd/html).\n";
print "For this reason, it is possible to put the data directory\n";
print "anywhere you would like. The path name can be absolute or\n";
print "relative (to the config directory). It doesn't matter. Here\n";
print "are two examples:\n";
print " Absolute: /usr/local/squirrelmail/data/\n";
print " Relative: ../data/\n";
print "\n";
print "[$WHT$data_dir$NRM]: $WHT";
$new_data_dir = ;
if ( $new_data_dir eq "\n" ) {
$new_data_dir = $data_dir;
} else {
$new_data_dir =~ s/[\r|\n]//g;
}
if ( $new_data_dir =~ /^\s*$/ ) {
$new_data_dir = "";
} else {
$new_data_dir =~ s/\/*$//g;
$new_data_dir =~ s/$/\//g;
}
return $new_data_dir;
}
# Attachment directory
sub command33b {
print "Path to directory used for storing attachments while a mail is\n";
print "being sent. There are a few security considerations regarding this\n";
print "directory:\n";
print " 1. It should have the permission 733 (rwx-wx-wx) to make it\n";
print " impossible for a random person with access to the webserver\n";
print " to list files in this directory. Confidential data might\n";
print " be laying around in there.\n";
print " 2. Since the webserver is not able to list the files in the\n";
print " content is also impossible for the webserver to delete files\n";
print " lying around there for too long.\n";
print " 3. It should probably be another directory than the data\n";
print " directory specified in option 3.\n";
print "\n";
print "[$WHT$attachment_dir$NRM]: $WHT";
$new_attachment_dir = ;
if ( $new_attachment_dir eq "\n" ) {
$new_attachment_dir = $attachment_dir;
} else {
$new_attachment_dir =~ s/[\r|\n]//g;
}
if ( $new_attachment_dir =~ /^\s*$/ ) {
$new_attachment_dir = "";
} else {
$new_attachment_dir =~ s/\/*$//g;
$new_attachment_dir =~ s/$/\//g;
}
return $new_attachment_dir;
}
sub command33c {
print "The directory hash level setting allows you to configure the level\n";
print "of hashing that Squirremail employs in your data and attachment\n";
print "directories. This value must be an integer ranging from 0 to 4.\n";
print "When this value is set to 0, Squirrelmail will simply store all\n";
print "files as normal in the data and attachment directories. However,\n";
print "when set to a value from 1 to 4, a simple hashing scheme will be\n";
print "used to organize the files in this directory. In short, the crc32\n";
print "value for a username will be computed. Then, up to the first 4\n";
print "digits of the hash, as set by this configuration value, will be\n";
print "used to directory hash the files for that user in the data and\n";
print "attachment directory. This allows for better performance on\n";
print "servers with larger numbers of users.\n";
print "\n";
print "[$WHT$dir_hash_level$NRM]: $WHT";
$new_dir_hash_level = ;
if ( $new_dir_hash_level eq "\n" ) {
$new_dir_hash_level = $dir_hash_level;
} else {
$new_dir_hash_level =~ s/[\r|\n]//g;
}
if ( ( int($new_dir_hash_level) < 0 )
|| ( int($new_dir_hash_level) > 4 )
|| !( int($new_dir_hash_level) eq $new_dir_hash_level ) ) {
print "Invalid Directory Hash Level.\n";
print "Value must be an integer ranging from 0 to 4\n";
print "Hit enter to continue.\n";
$enter_key = ;
$new_dir_hash_level = $dir_hash_level;
}
return $new_dir_hash_level;
}
sub command35 {
print "This is the default size (in pixels) of the left folder list.\n";
print "Default is 200, but you can set it to whatever you wish. This\n";
print "is a user preference, so this will only show up as their default.\n";
print "\n";
print "[$WHT$default_left_size$NRM]: $WHT";
$new_default_left_size = ;
if ( $new_default_left_size eq "\n" ) {
$new_default_left_size = $default_left_size;
} else {
$new_default_left_size =~ s/[\r|\n]//g;
}
return $new_default_left_size;
}
sub command36 {
print "Some IMAP servers only have lowercase letters in the usernames\n";
print "but they still allow people with uppercase to log in. This\n";
print "causes a problem with the user's preference files. This option\n";
print "transparently changes all usernames to lowercase.";
print "\n";
if ( lc($force_username_lowercase) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Convert usernames to lowercase (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
return "true";
}
return "false";
}
sub command37 {
print "";
print "\n";
if ( lc($default_use_priority) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow users to specify priority of outgoing mail (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
return "true";
}
return "false";
}
sub command38 {
print "";
print "\n";
if ( lc($default_hide_attribution) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Hide SM attributions (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
return "true";
}
return "false";
}
sub command39 {
print "";
print "\n";
if ( lc($default_use_mdn) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Enable support for read/delivery receipt support (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
return "true";
}
return "false";
}
sub command310 {
print "This allows you to prevent the editing of the users name and";
print "email address. This is mainly useful when used with the";
print "retrieveuserdata plugin\n";
print "\n";
if ( lc($edit_identity) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow editing? (y/n) [$WHT$default_value$NRM]: $WHT";
$new_edit = ;
if ( ( $new_edit =~ /^y\n/i ) || ( ( $new_edit =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$edit_identity = "true";
} else {
$edit_identity = "false";
}
return $edit_identity;
}
sub command311 {
print "This option allows you to choose if the user can edit their full name";
print "even when you don't want them to change their username\n";
print "\n";
if ( lc($edit_name) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow editing of the users full name? (y/n) [$WHT$default_value$NRM]: $WHT";
$new_edit = ;
if ( ( $new_edit =~ /^y\n/i ) || ( ( $new_edit =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$edit_name = "true";
} else {
$edit_name = "false";
}
return $edit_name;
}
sub command312 {
print "This option allows you to choose if users can use thread sorting\n";
print "Your IMAP server must support the THREAD command for this to work\n";
print "PHP versions later than 4.0.3 recommended\n";
print "\n";
if ( lc($allow_thread_sort) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow server side thread sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
$allow_thread_sort = ;
if ( ( $allow_thread_sort =~ /^y\n/i ) || ( ( $allow_thread_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$allow_thread_sort = "true";
} else {
$allow_thread_sort = "false";
}
return $allow_thread_sort;
}
sub command313 {
print "This option allows you to choose if SM uses server-side sorting\n";
print "Your IMAP server must support the SORT command for this to work\n";
print "\n";
if ( lc($allow_server_sort) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow server-side sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
$allow_server_sort = ;
if ( ( $allow_server_sort =~ /^y\n/i ) || ( ( $allow_server_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$allow_server_sort = "true";
} else {
$allow_server_sort = "false";
}
return $allow_server_sort;
}
sub command314 {
print "This option allows you to choose if SM uses charset search\n";
print "Your IMAP server must support the SEARCH CHARSET command for this to work\n";
print "\n";
if ( lc($allow_charset_search) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow charset searching? (y/n) [$WHT$default_value$NRM]: $WHT";
$allow_charset_search = ;
if ( ( $allow_charset_search =~ /^y\n/i ) || ( ( $allow_charset_search =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$allow_charset_search = "true";
} else {
$allow_charset_search = "false";
}
return $allow_charset_search;
}
sub command41 {
print "\nNow we will define the themes that you wish to use. If you have added\n";
print "a theme of your own, just follow the instructions (?) about how to add\n";
print "them. You can also change the default theme.\n";
print "[theme] command (?=help) > ";
$input = ;
$input =~ s/[\r|\n]//g;
while ( $input ne "d" ) {
if ( $input =~ /^\s*l\s*/i ) {
$count = 0;
while ( $count <= $#theme_name ) {
if ( $count == $theme_default ) {
print " *";
} else {
print " ";
}
$name = $theme_name[$count];
$num_spaces = 25 - length($name);
for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
$name = $name . " ";
}
print " $count. $name";
print "($theme_path[$count])\n";
$count++;
}
} elsif ( $input =~ /^\s*m\s*[0-9]+/i ) {
$old_def = $theme_default;
$theme_default = $input;
$theme_default =~ s/^\s*m\s*//;
if ( ( $theme_default > $#theme_name ) || ( $theme_default < 0 ) ) {
print "Cannot set default theme to $theme_default. That theme does not exist.\n";
$theme_default = $old_def;
}
} elsif ( $input =~ /^\s*\+/ ) {
print "What is the name of this theme: ";
$name = ;
$name =~ s/[\r|\n]//g;
$theme_name[ $#theme_name + 1 ] = $name;
print "Be sure to put ../themes/ before the filename.\n";
print "What file is this stored in (ex: ../themes/default_theme.php): ";
$name = ;
$name =~ s/[\r|\n]//g;
$theme_path[ $#theme_path + 1 ] = $name;
} elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
if ( $input =~ /[0-9]+\s*$/ ) {
$rem_num = $input;
$rem_num =~ s/^\s*-\s*//g;
$rem_num =~ s/\s*$//;
} else {
$rem_num = $#theme_name;
}
if ( $rem_num == $theme_default ) {
print "You cannot remove the default theme!\n";
} else {
$count = 0;
@new_theme_name = ();
@new_theme_path = ();
while ( $count <= $#theme_name ) {
if ( $count != $rem_num ) {
@new_theme_name = ( @new_theme_name, $theme_name[$count] );
@new_theme_path = ( @new_theme_path, $theme_path[$count] );
}
$count++;
}
@theme_name = @new_theme_name;
@theme_path = @new_theme_path;
if ( $theme_default > $rem_num ) {
$theme_default--;
}
}
} elsif ( $input =~ /^\s*t\s*/i ) {
print "\nStarting detection...\n\n";
opendir( DIR, "../themes" );
@files = grep { /\.php$/i } readdir(DIR);
$cnt = 0;
while ( $cnt <= $#files ) {
$filename = "../themes/" . $files[$cnt];
if ( $filename ne "../themes/index.php" ) {
$found = 0;
for ( $x = 0 ; $x <= $#theme_path ; $x++ ) {
if ( $theme_path[$x] eq $filename ) {
$found = 1;
}
}
if ( $found != 1 ) {
print "** Found theme: $filename\n";
print " What is its name? ";
$nm = ;
$nm =~ s/[\n|\r]//g;
$theme_name[ $#theme_name + 1 ] = $nm;
$theme_path[ $#theme_path + 1 ] = $filename;
}
}
$cnt++;
}
print "\n";
for ( $cnt = 0 ; $cnt <= $#theme_path ; $cnt++ ) {
$filename = $theme_path[$cnt];
if ( !( -e $filename ) ) {
print " Removing $filename (file not found)\n";
$offset = 0;
@new_theme_name = ();
@new_theme_path = ();
for ( $x = 0 ; $x < $#theme_path ; $x++ ) {
if ( $theme_path[$x] eq $filename ) {
$offset = 1;
}
if ( $offset == 1 ) {
$new_theme_name[$x] = $theme_name[ $x + 1 ];
$new_theme_path[$x] = $theme_path[ $x + 1 ];
} else {
$new_theme_name[$x] = $theme_name[$x];
$new_theme_path[$x] = $theme_path[$x];
}
}
@theme_name = @new_theme_name;
@theme_path = @new_theme_path;
}
}
print "\nDetection complete!\n\n";
closedir DIR;
} elsif ( $input =~ /^\s*\?\s*/ ) {
print ".-------------------------.\n";
print "| t (detect themes) |\n";
print "| + (add theme) |\n";
print "| - N (remove theme) |\n";
print "| m N (mark default) |\n";
print "| l (list themes) |\n";
print "| d (done) |\n";
print "`-------------------------'\n";
}
print "[theme] command (?=help) > ";
$input = ;
$input =~ s/[\r|\n]//g;
}
}
# Theme - CSS file
sub command42 {
print "You may specify a cascading style-sheet (CSS) file to be included\n";
print "on each html page generated by SquirrelMail. The CSS file is useful\n";
print "for specifying a site-wide font. If you're not familiar with CSS\n";
print "files, leave this blank.\n";
print "\n";
print "To clear out an existing value, just type a space for the input.\n";
print "\n";
print "[$WHT$theme_css$NRM]: $WHT";
$new_theme_css = ;
if ( $new_theme_css eq "\n" ) {
$new_theme_css = $theme_css;
} else {
$new_theme_css =~ s/[\r|\n]//g;
}
$new_theme_css =~ s/^\s*//;
return $new_theme_css;
}
sub command61 {
print "You can now define different LDAP servers.\n";
print "[ldap] command (?=help) > ";
$input = ;
$input =~ s/[\r|\n]//g;
while ( $input ne "d" ) {
if ( $input =~ /^\s*l\s*/i ) {
$count = 0;
while ( $count <= $#ldap_host ) {
print "$count. $ldap_host[$count]\n";
print " base: $ldap_base[$count]\n";
if ( $ldap_charset[$count] ) {
print " charset: $ldap_charset[$count]\n";
}
if ( $ldap_port[$count] ) {
print " port: $ldap_port[$count]\n";
}
if ( $ldap_name[$count] ) {
print " name: $ldap_name[$count]\n";
}
if ( $ldap_maxrows[$count] ) {
print " maxrows: $ldap_maxrows[$count]\n";
}
print "\n";
$count++;
}
} elsif ( $input =~ /^\s*\+/ ) {
$sub = $#ldap_host + 1;
print "First, we need to have the hostname or the IP address where\n";
print "this LDAP server resides. Example: ldap.bigfoot.com\n";
print "hostname: ";
$name = ;
$name =~ s/[\r|\n]//g;
$ldap_host[$sub] = $name;
print "\n";
print "Next, we need the server root (base dn). For this, an empty\n";
print "string is allowed.\n";
print "Example: ou=member_directory,o=netcenter.com\n";
print "base: ";
$name = ;
$name =~ s/[\r|\n]//g;
$ldap_base[$sub] = $name;
print "\n";
print "This is the TCP/IP port number for the LDAP server. Default\n";
print "port is 389. This is optional. Press ENTER for default.\n";
print "port: ";
$name = ;
$name =~ s/[\r|\n]//g;
$ldap_port[$sub] = $name;
print "\n";
print "This is the charset for the server. Default is utf-8. This\n";
print "is also optional. Press ENTER for default.\n";
print "charset: ";
$name = ;
$name =~ s/[\r|\n]//g;
$ldap_charset[$sub] = $name;
print "\n";
print "This is the name for the server, used to tag the results of\n";
print "the search. Default it \"LDAP: hostname\". Press ENTER for default\n";
print "name: ";
$name = ;
$name =~ s/[\r|\n]//g;
$ldap_name[$sub] = $name;
print "\n";
print "You can specify the maximum number of rows in the search result.\n";
print "Default is unlimited. Press ENTER for default.\n";
print "maxrows: ";
$name = ;
$name =~ s/[\r|\n]//g;
$ldap_maxrows[$sub] = $name;
print "\n";
} elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
if ( $input =~ /[0-9]+\s*$/ ) {
$rem_num = $input;
$rem_num =~ s/^\s*-\s*//g;
$rem_num =~ s/\s*$//;
} else {
$rem_num = $#ldap_host;
}
$count = 0;
@new_ldap_host = ();
@new_ldap_base = ();
@new_ldap_port = ();
@new_ldap_name = ();
@new_ldap_charset = ();
@new_ldap_maxrows = ();
while ( $count <= $#ldap_host ) {
if ( $count != $rem_num ) {
@new_ldap_host = ( @new_ldap_host, $ldap_host[$count] );
@new_ldap_base = ( @new_ldap_base, $ldap_base[$count] );
@new_ldap_port = ( @new_ldap_port, $ldap_port[$count] );
@new_ldap_name = ( @new_ldap_name, $ldap_name[$count] );
@new_ldap_charset = ( @new_ldap_charset, $ldap_charset[$count] );
@new_ldap_maxrows = ( @new_ldap_maxrows, $ldap_maxrows[$count] );
}
$count++;
}
@ldap_host = @new_ldap_host;
@ldap_base = @new_ldap_base;
@ldap_port = @new_ldap_port;
@ldap_name = @new_ldap_name;
@ldap_charset = @new_ldap_charset;
@ldap_maxrows = @new_ldap_maxrows;
} elsif ( $input =~ /^\s*\?\s*/ ) {
print ".-------------------------.\n";
print "| + (add host) |\n";
print "| - N (remove host) |\n";
print "| l (list hosts) |\n";
print "| d (done) |\n";
print "`-------------------------'\n";
}
print "[ldap] command (?=help) > ";
$input = ;
$input =~ s/[\r|\n]//g;
}
}
sub command62 {
print "Some of our developers have come up with very good javascript interface\n";
print "for searching through address books, however, our original goals said\n";
print "that we would be 100% HTML. In order to make it possible to use their\n";
print "interface, and yet stick with our goals, we have also written a plain\n";
print "HTML version of the search. Here, you can choose which version to use.\n";
print "\n";
print "This is just the default value. It is also a user option that each\n";
print "user can configure individually\n";
print "\n";
if ( lc($default_use_javascript_addr_book) eq "true" ) {
$default_value = "y";
} else {
$default_use_javascript_addr_book = "false";
$default_value = "n";
}
print "Use javascript version by default (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = ;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$default_use_javascript_addr_book = "true";
} else {
$default_use_javascript_addr_book = "false";
}
return $default_use_javascript_addr_book;
}
sub command91 {
print "If you want to store your users address book details in a database then\n";
print "you need to set this DSN to a valid value. The format for this is:\n";
print "mysql://user:pass\@hostname/dbname\n";
print "Where mysql can be one of the databases PHP supports, the most common\n";
print "of these are mysql, msql and pgsql\n";
print "If the DSN is left empty (hit space and then return) the database\n";
print "related code for address books will not be used\n";
print "\n";
if ( $addrbook_dsn eq "" ) {
$default_value = "Disabled";
} else {
$default_value = $addrbook_dsn;
}
print "[$WHT$addrbook_dsn$NRM]: $WHT";
$new_dsn = ;
if ( $new_dsn eq "\n" ) {
$new_dsn = "";
} else {
$new_dsn =~ s/[\r|\n]//g;
$new_dsn =~ s/^\s+$//g;
}
return $new_dsn;
}
sub command92 {
print "This is the name of the table you want to store the address book\n";
print "data in, it defaults to 'address'\n";
print "\n";
print "[$WHT$addrbook_table$NRM]: $WHT";
$new_table = ;
if ( $new_table eq "\n" ) {
$new_table = $addrbook_table;
} else {
$new_table =~ s/[\r|\n]//g;
}
return $new_table;
}
sub command93 {
print "If you want to store your users preferences in a database then\n";
print "you need to set this DSN to a valid value. The format for this is:\n";
print "mysql://user:pass\@hostname/dbname\n";
print "Where mysql can be one of the databases PHP supports, the most common\n";
print "of these are mysql, msql and pgsql\n";
print "If the DSN is left empty (hit space and then return) the database\n";
print "related code for address books will not be used\n";
print "\n";
if ( $prefs_dsn eq "" ) {
$default_value = "Disabled";
} else {
$default_value = $prefs_dsn;
}
print "[$WHT$prefs_dsn$NRM]: $WHT";
$new_dsn = ;
if ( $new_dsn eq "\n" ) {
$new_dsn = "";
} else {
$new_dsn =~ s/[\r|\n]//g;
$new_dsn =~ s/^\s+$//g;
}
return $new_dsn;
}
sub command94 {
print "This is the name of the table you want to store the preferences\n";
print "data in, it defaults to 'userprefs'\n";
print "\n";
print "[$WHT$prefs_table$NRM]: $WHT";
$new_table = ;
if ( $new_table eq "\n" ) {
$new_table = $prefs_table;
} else {
$new_table =~ s/[\r|\n]//g;
}
return $new_table;
}
sub command95 {
print "This is the name of the field in which you want to store the\n";
print "username of the person the prefs are for. It default to 'user'\n";
print "which clashes with a reserved keyword in PostgreSQL so this\n";
print "will need to be changed for that database at least\n";
print "\n";
print "[$WHT$prefs_user_field$NRM]: $WHT";
$new_field = ;
if ( $new_field eq "\n" ) {
$new_field = $prefs_user_field;
} else {
$new_field =~ s/[\r|\n]//g;
}
return $new_field;
}
sub command96 {
print "This is the name of the field in which you want to store the\n";
print "preferences keyword. It defaults to 'prefkey'\n";
print "\n";
print "[$WHT$prefs_key_field$NRM]: $WHT";
$new_field = ;
if ( $new_field eq "\n" ) {
$new_field = $prefs_key_field;
} else {
$new_field =~ s/[\r|\n]//g;
}
return $new_field;
}
sub command97 {
print "This is the name of the field in which you want to store the\n";
print "preferences value. It defaults to 'prefval'\n";
print "\n";
print "[$WHT$prefs_val_field$NRM]: $WHT";
$new_field = ;
if ( $new_field eq "\n" ) {
$new_field = $prefs_val_field;
} else {
$new_field =~ s/[\r|\n]//g;
}
return $new_field;
}
sub save_data {
$tab = " ";
if ( open( CF, ">config.php" ) ) {
print CF " '$ldap_host[$count]',\n";
# string
print CF " 'base' => '$ldap_base[$count]'";
if ( $ldap_name[$count] ) {
print CF ",\n";
# string
print CF " 'name' => '$ldap_name[$count]'";
}
if ( $ldap_port[$count] ) {
print CF ",\n";
# integer
print CF " 'port' => $ldap_port[$count]";
}
if ( $ldap_charset[$count] ) {
print CF ",\n";
# string
print CF " 'charset' => '$ldap_charset[$count]'";
}
if ( $ldap_maxrows[$count] ) {
print CF ",\n";
# integer
print CF " 'maxrows' => $ldap_maxrows[$count]";
}
print CF "\n";
print CF ");\n";
print CF "\n";
}
# string
print CF "\$addrbook_dsn = '$addrbook_dsn';\n";
# string
print CF "\$addrbook_table = '$addrbook_table';\n\n";
# string
print CF "\$prefs_dsn = '$prefs_dsn';\n";
# string
print CF "\$prefs_table = '$prefs_table';\n";
# string
print CF "\$prefs_user_field = '$prefs_user_field';\n";
# string
print CF "\$prefs_key_field = '$prefs_key_field';\n";
# string
print CF "\$prefs_val_field = '$prefs_val_field';\n";
print CF "\n";
print CF "/**\n";
print CF " * Make sure there are no characters after the PHP closing\n";
print CF " * tag below (including newline characters and whitespace).\n";
print CF " * Otherwise, that character will cause the headers to be\n";
print CF " * sent and regular output to begin, which will majorly screw\n";
print CF " * things up when we try to send more headers later.\n";
print CF " */\n";
print CF "?>";
close CF;
print "Data saved in config.php\n";
} else {
print "Error saving config.php: $!\n";
}
}
sub set_defaults {
system "clear";
print $WHT. "SquirrelMail Configuration : " . $NRM;
if ( $config == 1 ) { print "Read: config.php"; }
elsif ( $config == 2 ) { print "Read: config_default.php"; }
print "\n";
print "---------------------------------------------------------\n";
print "While we have been building SquirrelMail, we have discovered some\n";
print "preferences that work better with some servers that don't work so\n";
print "well with others. If you select your IMAP server, this option will\n";
print "set some pre-defined settings for that server.\n";
print "\n";
print "Please note that you will still need to go through and make sure\n";
print "everything is correct. This does not change everything. There are\n";
print "only a few settings that this will change.\n";
print "\n";
$continue = 0;
while ( $continue != 1 ) {
print "Please select your IMAP server:\n";
print " cyrus = Cyrus IMAP server\n";
print " uw = University of Washington's IMAP server\n";
print " exchange = Microsoft Exchange IMAP server\n";
print " courier = Courier IMAP server\n";
print " macosx = Mac OS X Mailserver\n";
print " quit = Do not change anything\n";
print "Command >> ";
$server = ;
$server =~ s/[\r|\n]//g;
print "\n";
if ( $server eq "cyrus" ) {
$imap_server_type = "cyrus";
$default_folder_prefix = "";
$trash_folder = "INBOX.Trash";
$sent_folder = "INBOX.Sent";
$draft_folder = "INBOX.Drafts";
$show_prefix_option = false;
$default_sub_of_inbox = true;
$show_contain_subfolders_option = false;
$optional_delimiter = ".";
$disp_default_folder_prefix = "";
$continue = 1;
} elsif ( $server eq "uw" ) {
$imap_server_type = "uw";
$default_folder_prefix = "mail/";
$trash_folder = "Trash";
$sent_folder = "Sent";
$draft_folder = "Drafts";
$show_prefix_option = true;
$default_sub_of_inbox = false;
$show_contain_subfolders_option = true;
$optional_delimiter = "/";
$disp_default_folder_prefix = $default_folder_prefix;
$continue = 1;
} elsif ( $server eq "exchange" ) {
$imap_server_type = "exchange";
$default_folder_prefix = "";
$default_sub_of_inbox = true;
$trash_folder = "INBOX/Deleted Items";
$sent_folder = "INBOX/Sent Items";
$drafts_folder = "INBOX/Drafts";
$show_prefix_option = false;
$show_contain_subfolders_option = false;
$optional_delimiter = "detect";
$disp_default_folder_prefix = "";
$continue = 1;
} elsif ( $server eq "courier" ) {
$imap_server_type = "courier";
$default_folder_prefix = "INBOX.";
$trash_folder = "Trash";
$sent_folder = "Sent";
$draft_folder = "Drafts";
$show_prefix_option = false;
$default_sub_of_inbox = false;
$show_contain_subfolders_option = false;
$optional_delimiter = ".";
$disp_default_folder_prefix = $default_folder_prefix;
$continue = 1;
} elsif ( $server eq "macosx" ) {
$imap_server_type = "macosx";
$default_folder_prefix = "INBOX/";
$trash_folder = "Trash";
$sent_folder = "Sent";
$draft_folder = "Drafts";
$show_prefix_option = false;
$default_sub_of_inbox = true;
$show_contain_subfolders_option = false;
$optional_delimiter = "detect";
$allow_charset_search = false;
$disp_default_folder_prefix = $default_folder_prefix;
$continue = 1;
} elsif ( $server eq "quit" ) {
$continue = 1;
} else {
$disp_default_folder_prefix = $default_folder_prefix;
print "Unrecognized server: $server\n";
print "\n";
}
print " imap_server_type = $imap_server_type\n";
print " default_folder_prefix = $disp_default_folder_prefix\n";
print " trash_folder = $trash_folder\n";
print " sent_folder = $sent_folder\n";
print " draft_folder = $draft_folder\n";
print " show_prefix_option = $show_prefix_option\n";
print " default_sub_of_inbox = $default_sub_of_inbox\n";
print "show_contain_subfolders_option = $show_contain_subfolders_option\n";
print " optional_delimiter = $optional_delimiter\n";
}
print "\nPress any key to continue...";
$tmp = ;
}