www.pudn.com > ADS_s3c2440a.rar > camdef.h

	/***************************************** 
  NAME: Camdef.h 
  DESC: header file for Imagetest test codes  
  HISTORY:  2002.03.13:draft ver 0.0 
                  2004.02.09:edited by junon for S3C2440A 
 *****************************************/ 
 
#ifndef __CAMDEF_H__ 
#define __CAMDEF_H__ 
 
#ifdef __cplusplus 
extern "C"{ 
#endif 
 
#include "def.h" 
 
//Boaz Sekwang Kim 
#define CAM_CCIR420						(0) 
#define CAM_CCIR422						(1) 
#define CAM_RGB16B						0 
#define CAM_RGB24B						1 
 
#define CAM_ITU601						(1) 
#define CAM_ITU656						(0) 
 
#define CAM_ORDER_YCBYCR				(0) 
#define CAM_ORDER_YCRYCB				(1) 
#define CAM_ORDER_CBYCRY				(2) 
#define CAM_ORDER_CRYCBY				(3) 
 
#define CAM_CODEC_IN_420				(0) 
#define CAM_CODEC_IN_422				(1) 
 
#define CAM_CODEC_OUT_420				(0) 
#define CAM_CODEC_OUT_422				(1) 
 
#define CAM_FLIP_NORMAL					(0) 
#define CAM_FLIP_XAXIS					(1) 
#define CAM_FLIP_YAXIS					(2) 
#define CAM_FLIP_180						(3) 
 
#define CAM_SCALER_BYPASS_ON			(1) 
#define CAM_SCALER_BYPASS_OFF			(0) 
 
#define CAM_CODEC_SACLER_START_BIT			(1<<15) 
#define CAM_PVIEW_SACLER_START_BIT			(1<<15) 
 
#define CAM_CAMIF_GLOBAL_CAPTURE_ENABLE_BIT		(1<<31) 
#define CAM_CODEC_SCALER_CAPTURE_ENABLE_BIT		(1<<30) 
#define CAM_PVIEW_SCALER_CAPTURE_ENABLE_BIT		(1<<29) 
 
//camTestMode 
#define CAM_TEST_MODE_PVIEW				(1<<0) 
#define CAM_TEST_MODE_CODEC				(1<<1) 
 
//camCodecStatus, camPviewStatus 
#define CAM_STARTED						(0) 
#define CAM_STOP_ISSUED				(1) 
#define CAM_LAST_CAPTURING		(2) 
#define CAM_STOPPED						(3) 
#define CAM_CODEC_SCALER_BYPASS_STATE	(4) 
 
//Image Size 
#define XGA_XSIZE			(1024) 
#define XGA_YSIZE			(768) 
#define SVGA_XSIZE		(800) 
#define SVGA_YSIZE		(600) 
#define VGA_XSIZE			(640) 
#define VGA_YSIZE			(480) 
#define QVGA_XSIZE		(320) 
#define QVGA_YSIZE		(240) 
#define PQVGA_XSIZE		(240) 
#define PQVGA_YSIZE		(320) 
#define CIF_XSIZE			(352) 
#define CIF_YSIZE			(288) 
#define QCIF_XSIZE			(176) 
#define QCIF_YSIZE			(144) 
 
#define CAMCLK48000000		(0) 
#define CAMCLK24000000		(1) 
#define CAMCLK16000000		(2) 
#define CAMCLK12000000		(3) 
#define CAMCLK9600000		(4) 
#define CAMCLK8000000		(5) 
 
#define C16_BLUE 	(0x1f<<0) 
#define C16_GREEN 	(0x3f<<5) 
#define C16_RED 		(0x1f<<11) 
#define C16_BLACK 	(0x0) 
#define C16_WHITE 	(0xffff) 
 
#define C18_BLUE	(0xfc) 
#define C18_GREEN	(0xfc00) 
#define C18_RED 		(0xfc0000) 
#define C18_BLACK	(0x0) 
#define C18_WHITE	(0xfcfcfc) 
 
//camera type 
#define CAM_OV7620			(0)	// 640X480 VGA,  
#define CAM_S5X433			(1)	// VGA, 
#define CAM_S5X532			(2)	// VGA, 
#define CAM_AU70H			(3) 	//1152x864 MegaPixel Camera, max 19.3MHz  
#define CAM_S5X3A1			(4)	// Mega pixel, 
 
#define	YCbCrtoR(Y,Cb,Cr)	(1000*Y + 1371*(Cr-128))/1000 
#define 	YCbCrtoG(Y,Cb,Cr)	(1000*Y - 336*(Cb-128) - 698*(Cr-128))/1000 
#define	YCbCrtoB(Y,Cb,Cr)	(1000*Y + 1732*(Cb-128))/1000 
 
#define CAM_FRAMEBUFFER_C _NONCACHE_STARTADDRESS+0x1000000// Adjusting is needed.. 
#define CAM_FRAMEBUFFER_P _NONCACHE_STARTADDRESS// Max buffer size of Port : 0x1000000 (2048*2048*4) 
 
// Current modes 
#define USED_CAM_TYPE				CAM_S5X532 
#define USED_LCD_TYPE  				MODE_TFT_16BIT_240320  // refer to Lcdlib.h  
//AU70H camera resolution 
#define AU70H_VIDEO_SIZE			(1152)	  // 1152:(1152x864) or 640:(640x480)	 
#define CAM_CODEC_OUTPUT		CAM_CCIR420 
#define CAM_PVIEW_OUTPUT		CAM_RGB24B 
 
#define CAM_CODEC_4PP	(0) // 0:all equal, 1:4 pingpong 
#define CAM_PVIEW_4PP	(0) // 0:all equal, 1:4 pingpong 
 
#if USED_CAM_TYPE==CAM_AU70H && AU70H_VIDEO_SIZE==1152 
#define CAM_SRC_HSIZE				(1152) 
#define CAM_SRC_VSIZE					(864) 
#elif USED_CAM_TYPE==CAM_S5X3A1 
#define CAM_SRC_HSIZE				(1280) 
#define CAM_SRC_VSIZE					(1024) 
#else 
#define CAM_SRC_HSIZE				(640) 
#define CAM_SRC_VSIZE					(480) 
#endif 
 
 
#ifdef __cplusplus 
} 
#endif 
 
#endif /*__CAMDEF_H__*/