www.pudn.com > PmSensored.rar > DSP2833x_usDelay.asm, change:2013-08-15,size:2743b


;// TI File $Revision: /main/4 $ 
;// Checkin $Date: July 30, 2007   10:28:57 $ 
;//########################################################################### 
;// 
;// FILE:  DSP2833x_usDelay.asm 
;// 
;// TITLE: Simple delay function 
;// 
;// DESCRIPTION: 
;//   
;// This is a simple delay function that can be used to insert a specified 
;// delay into code.   
;//  
;// This function is only accurate if executed from internal zero-waitstate 
;// SARAM. If it is executed from waitstate memory then the delay will be 
;// longer then specified.  
;//  
;// To use this function: 
;// 
;//  1 - update the CPU clock speed in the DSP2833x_Examples.h 
;//    file. For example: 
;//    #define CPU_RATE 6.667L // for a 150MHz CPU clock speed 
;//    or #define CPU_RATE 10.000L // for a 100MHz CPU clock speed  
;// 
;//  2 - Call this function by using the DELAY_US(A) macro 
;//    that is defined in the DSP2833x_Examples.h file.  This macro 
;//    will convert the number of microseconds specified 
;//    into a loop count for use with this function.   
;//    This count will be based on the CPU frequency you specify. 
;// 
;//  3 - For the most accurate delay  
;//    - Execute this function in 0 waitstate RAM.   
;//    - Disable interrupts before calling the function 
;//      If you do not disable interrupts, then think of 
;//      this as an "at least" delay function as the actual 
;//      delay may be longer.  
;// 
;//  The C assembly call from the DELAY_US(time) macro will 
;//  look as follows:  
;// 
;//  extern void Delay(long LoopCount);                 
;// 
;//        MOV   AL,#LowLoopCount 
;//        MOV   AH,#HighLoopCount 
;//        LCR   _Delay 
;// 
;//  Or as follows (if count is less then 16-bits): 
;// 
;//        MOV   ACC,#LoopCount 
;//        LCR   _Delay 
;// 
;// 
;//########################################################################### 
;// $TI Release: 2833x/2823x Header Files and Peripheral Examples V133 $ 
;// $Release Date: June 8, 2012 $ 
;//###########################################################################	 
 
       .def _DSP28x_usDelay 
       .sect "ramfuncs" 
 
        .global  __DSP28x_usDelay 
_DSP28x_usDelay: 
        SUB    ACC,#1 
        BF     _DSP28x_usDelay,GEQ    ;; Loop if ACC >= 0 
        LRETR  
 
;There is a 9/10 cycle overhead and each loop 
;takes five cycles. The LoopCount is given by 
;the following formula: 
;  DELAY_CPU_CYCLES = 9 + 5*LoopCount 
; LoopCount = (DELAY_CPU_CYCLES - 9) / 5 
; The macro DELAY_US(A) performs this calculation for you 
; 
;//=========================================================================== 
;// End of file. 
;//===========================================================================