www.pudn.com > Linux_serial_network_src.rar > README

You can modify and distribute this source code freely.    
Copyright (C) 2003 Li Suke,Software School of Peking University. 
 
1. Compile the project 
If you use Linux kernel 2.2.*, you should use make -f Makefile.20 
to compile the project; 
   [root@localhost]#make -f Makefile.20 
 
if you use Linux kernel 2.4.*, just input make command. 
   [root@localhost]#make. 
 
2. load the module 
 
First, creat the character devices: 
   [root@localhost]#mknod /dev/ed_rec c 200 0 
   [root@localhost]#mknod /dev/ed_tx c 201 0 
 
then, let the ed_load and ed_unload can execute: 
   [root@localhost]#chmod +x ed_unload 
   [root@localhost]#chmod +x ed_load 
 
last, load the driver: 
   [root@localhost]#./ed_load 
You can change the IP address in ed_load script file 
 
3. run server 
   [root@localhost]#./server 
 
now you can use the ed0 device and send and receive data  
through it.:)