www.pudn.com > MOXA--DOS.rar > C104P.H
// declare comm fuction according to moxa card
#if !defined(__MODEMC_H)
#include
#endif
#if !defined(__FILEC_H)
#include
#endif
#define SENDDATAOK 0
#define OK 1
#define NOT 0
#define HAVEDATA 1
#define NODATA 0
#define SC_SENDANSWER 's'
#define SC_RECANSWER 'r'
#define SC_NOTREADY 'n'
#define SC_RECOK 'o'
#define SC_RECNOT 'k'
#define MC_REQDATA 'R'
#define MC_SENDDATA 'S'
#define MC_RECNOT 'K'
#define MC_RECOK 'O'
#define DATAHEAD '!'
#define CLEARDATA ' '
#define DelayBSend 1
#define RPortTryTime 1000 //must be!!
#define WaitCommandAnswerTime 80 //old 50
//#define WaitLastAnswerTime 50
#define WaitLastAnswerTime 100
#define WaitDataHeadTime 50
//type C104P C168P C102
//#ifdef (MultiPortCardMOXA)
/*
#if defined(MultiPortCardMOXA)
#if defined(__TINY__)||defined(__SMALL__)
#elif defined(__MEDIUM__)
#error MultiPortCard Type Not Yet defined!
#elif defined(__LARGE__)
#elif defined(__HUGE__)||(__COMPACT__)
#endif
#else
// #error MultiPortCard Not Yet defined!
#endif
*/
#define B50 0x00
#define B75 0x01
#define B110 0x02
#define B134 0x03
#define B150 0x04
#define B300 0x05
#define B600 0x06
#define B1200 0x07
#define B1800 0x08
#define B2400 0x09
#define B4800 0x0A
#define B7200 0x0B
#define B9600 0x0C
#define B19200 0x0D
#define B38400 0x0E
#define B57600 0x0F
#define B115200 0x10
#define B230400 0x11
#define B460800 0x12
#define B921600 0x13
/* MODE setting */
#define BIT_5 0x00 /* Word length define */
#define BIT_6 0x01
#define BIT_7 0x02
#define BIT_8 0x03
#define STOP_1 0x00 /* Stop bits define */
#define STOP_2 0x04
#define P_EVEN 0x18 /* Parity define */
#define P_ODD 0x08
#define P_SPC 0x38
#define P_MRK 0x28
#define P_NONE 0x00
/* MODEM CONTROL setting */
#define C_DTR 0x01
#define C_RTS 0x02
/* MODEM LINE STATUS */
#define S_CTS 0x01
#define S_DSR 0x02
#define S_RI 0x04
#define S_CD 0x08
#if !defined C104P_C
//#error no use
extern unsigned char no_data;
extern int Recs_Error;
extern int Resc_Error;
//extern union VR vr;
#ifdef __cplusplus
extern "C" {
#endif
extern void cdecl port_init(const int port); //initital port
extern void cdecl lattice_init(const int port);
extern void cdecl waijian_init(const int port);
extern void cdecl port_init_low(const int port,const int baud, char parity,char databit, char stopbit);
extern void cdecl port_init_tp(const int port);
extern void cdecl port_init_tp_panyu(int port);
extern void cdecl port_init_nanhaidd(int port);
extern void cdecl port_init_cgtp(int port);
extern unsigned char cdecl r_status(const int port);
extern void cdecl sport(const int,const char);
extern void cdecl sport2(const int port, const unsigned char ch);
extern void cdecl send_string(const int,char*);
extern void cdecl SendString(const int port,char *str, const int num);
extern void cdecl send_string2(const int port, char *str, const int num);
extern void cdecl SendStringEcho(const int port,char *str,const int num);
extern void cdecl SendStringEcho3(const int port,char *str, const int num);
extern unsigned char cdecl rport(const int);
extern unsigned char cdecl rports(const int port);
extern unsigned char cdecl rport2(const int port,unsigned char *chget);
extern int cdecl rportWy(const int port, char *charin);
extern char * cdecl rec_string(const int,const int);
extern char * cdecl RecStringEcho(const int port,const int bytes); /* Error time.Resc_Error =1 */
extern char * cdecl RecStringEcho3(const int port,const int bytes); /* Error time.Resc_Error =1 */
extern char cdecl McRecString2(const int port,unsigned char *str, const int bytes); /* Error time.Resc_Error =1 */
extern char cdecl McRecString3(const int port,unsigned char *str, const int bytes); /* Error time.Resc_Error =1 */
extern void cdecl MakeVerify(unsigned char *str, const int bytes);
extern int cdecl Verify(unsigned char *str, const int bytes);
extern int cdecl Verify1(unsigned char *str, const int bytes);
extern void cdecl MakeVerify1(unsigned char *str, const int bytes);
extern void cdecl rport3(const int port,unsigned char *chget);
extern void cdecl port_init_pywj(const int WjPortS,const int WjPortX);
extern void cdecl Fqport_init(const int port);
extern int cdecl sio_reset(void);
extern int cdecl sio_getports(int *port_no_array, int array_size);
extern int cdecl sio_loopback(int port, char *buf, int len);
extern int cdecl sio_ioctl(int port, int baud, int mode);
extern int cdecl sio_getch(int port);
extern int cdecl sio_linput(int port, char *buf, int len, int term);
extern int cdecl sio_read(int port, char *buf, int len);
extern int cdecl sio_putch(int port, int term);
extern int cdecl sio_putb(int port, char *buf, int len);
extern int cdecl sio_write(int port, char *buf, int len);
extern int cdecl sio_flush(int port, int func);
extern long cdecl sio_iqueue(int port);
extern long cdecl sio_ifree(int port);
extern long cdecl sio_oqueue(int port);
extern long cdecl sio_ofree(int port);
extern int cdecl sio_lstatus(int port);
extern int cdecl sio_lctrl(int port, int mode);
extern int cdecl sio_term_irq(int port, void (interrupt far *func)(), char code);
extern int cdecl sio_cnt_irq(int port, void (interrupt far *func)(), int count);
extern int cdecl sio_modem_irq(int port, void (interrupt far *func)());
extern int cdecl sio_break_irq(int port, void (interrupt far *func)());
extern int cdecl sio_break(int port, int time);
extern int cdecl sio_brk_cnt(int port);
extern int cdecl sio_flowctrl(int port, int mode);
extern int cdecl sio_Tx_hold(int port);
extern int cdecl sio_disableTx(int port);
extern int cdecl sio_enableTx(int port);
extern int cdecl sio_close(int port);
extern int cdecl sio_open(int port);
extern long cdecl sio_getbaud(int port);
extern int cdecl sio_getmode(int port);
extern int cdecl sio_getflow(int port);
extern int cdecl sio_timeout(int time_tic);
extern int cdecl sio_linput_t(int port, char *buf, int len, int term);
extern int cdecl sio_putb_t(int port, char *buf, int len);
extern int cdecl sio_overflow(int port);
extern int cdecl sio_overlap(int port, int mode);
extern int cdecl sio_cardno(int drvname);
extern int cdecl sio_id(int drvname, int card);
extern int cdecl sio_bank(int drvname, int card);
extern int cdecl sio_linked(int drvname, int card);
extern int cdecl sio_view(int port, char *ibuf, int len);
extern int cdecl sio_disableIRQ(int port, int intrr_type);
extern int cdecl sio_enableIRQ(int port, int intrr_type);
extern int cdecl sio_DTR(int port, int mode);
extern int cdecl sio_RTS(int port, int mode);
extern int cdecl sio_baud(int port, long speed);
extern int cdecl sio_ignore_errdata(int port, int mode);
extern int cdecl sio_data_status(int port);
extern int cdecl sio_putb_x(int port, char *buf, int len, int delay);
extern int cdecl sio_disableRx(int port);
extern int cdecl sio_enableRx(int port);
extern int cdecl sio_getACs(int drvname, int card, int *serial_no_array,
int array_size);
extern int cdecl sio_ACstate(int drvname, int serial);
extern long cdecl sio_ACdiag(int drvname, int serial);
#ifdef __cplusplus
}
#endif
#else
unsigned char no_data = 0;
int Recs_Error;
int Resc_Error;
//union VR vr;
#ifdef __cplusplus
extern "C" {
#endif
//fuction copy from headc.h"
int cdecl sio_reset(void);
int cdecl sio_getports(int *port_no_array, int array_size);
int cdecl sio_loopback(int port, char *buf, int len);
int cdecl sio_ioctl(int port, int baud, int mode);
int cdecl sio_getch(int port);
int cdecl sio_linput(int port, char *buf, int len, int term);
int cdecl sio_read(int port, char *buf, int len);
int cdecl sio_putch(int port, int term);
int cdecl sio_putb(int port, char *buf, int len);
int cdecl sio_write(int port, char *buf, int len);
int cdecl sio_flush(int port, int func);
long cdecl sio_iqueue(int port);
long cdecl sio_ifree(int port);
long cdecl sio_oqueue(int port);
long cdecl sio_ofree(int port);
int cdecl sio_lstatus(int port);
int cdecl sio_lctrl(int port, int mode);
int cdecl sio_term_irq(int port, void (interrupt far *func)(), char code);
int cdecl sio_cnt_irq(int port, void (interrupt far *func)(), int count);
int cdecl sio_modem_irq(int port, void (interrupt far *func)());
int cdecl sio_break_irq(int port, void (interrupt far *func)());
int cdecl sio_break(int port, int time);
int cdecl sio_brk_cnt(int port);
int cdecl sio_flowctrl(int port, int mode);
int cdecl sio_Tx_hold(int port);
int cdecl sio_disableTx(int port);
int cdecl sio_enableTx(int port);
int cdecl sio_close(int port);
int cdecl sio_open(int port);
long cdecl sio_getbaud(int port);
int cdecl sio_getmode(int port);
int cdecl sio_getflow(int port);
int cdecl sio_timeout(int time_tic);
int cdecl sio_linput_t(int port, char *buf, int len, int term);
int cdecl sio_putb_t(int port, char *buf, int len);
int cdecl sio_overflow(int port);
int cdecl sio_overlap(int port, int mode);
int cdecl sio_cardno(int drvname);
int cdecl sio_id(int drvname, int card);
int cdecl sio_bank(int drvname, int card);
int cdecl sio_linked(int drvname, int card);
int cdecl sio_view(int port, char *ibuf, int len);
int cdecl sio_disableIRQ(int port, int intrr_type);
int cdecl sio_enableIRQ(int port, int intrr_type);
int cdecl sio_DTR(int port, int mode);
int cdecl sio_RTS(int port, int mode);
int cdecl sio_baud(int port, long speed);
int cdecl sio_ignore_errdata(int port, int mode);
int cdecl sio_data_status(int port);
int cdecl sio_putb_x(int port, char *buf, int len, int delay);
int cdecl sio_disableRx(int port);
int cdecl sio_enableRx(int port);
int cdecl sio_getACs(int drvname, int card, int *serial_no_array,
int array_size);
int cdecl sio_ACstate(int drvname, int serial);
long cdecl sio_ACdiag(int drvname, int serial);
//end of copy. //by xf in shenzhen 98/09/15.
void cdecl port_init(const int port); //initital port
void cdecl lattice_init(const int port);
void cdecl waijian_init(const int port);
void cdecl port_init_low(const int port,const int baud, char parity,char databit, char stopbit);
void cdecl port_init_tp(const int port);
void cdecl port_init_tp_panyu(int port);
void cdecl port_init_nanhaidd(int port);
void cdecl port_init_cgtp(int port);
unsigned char cdecl r_status(const int port);
void cdecl sport(const int,const char);
void cdecl sport2(const int port, const unsigned char ch);
void cdecl send_string(const int,char*);
void cdecl SendString(const int port,char *str, const int num);
void cdecl send_string2(const int port, char *str, const int num);
void cdecl SendStringEcho(const int port,char *str,const int num);
void cdecl SendStringEcho3(const int port,char *str, const int num);
unsigned char cdecl rport(const int);
unsigned char cdecl rports(const int port);
unsigned char cdecl rport2(const int port,unsigned char *chget);
int cdecl rportWy(const int port, char *charin);
char * cdecl rec_string(const int,const int);
char * cdecl RecStringEcho(const int port,const int bytes);
char * cdecl RecStringEcho3(const int port,const int bytes);
char cdecl McRecString2(const int port,unsigned char *str, const int bytes);
char cdecl McRecString3(const int port,unsigned char *str, const int bytes);
void cdecl MakeVerify(unsigned char *str, const int bytes);
int cdecl Verify(unsigned char *str, const int bytes);
int cdecl Verify1(unsigned char *str, const int bytes);
void cdecl MakeVerify1(unsigned char *str, const int bytes);
void cdecl rport3(const int port,unsigned char *chget);
void cdecl port_init_pywj(const int WjPortS,const int WjPortX);
void cdecl Fqport_init(const int port);
#ifdef __cplusplus
}
#endif
#undef C104P_C
#endif
#if defined( Uses_DCommunication ) && !defined( __DCommunication )
#define __DCommunication
#define MAXBUFFER 211
class DCommunication {
private:
int tail,
head;
public:
int status,
count,
time_out,
port,
sendlen;
char ret;
unsigned char getdata,
block[MAXBUFFER];
DCommunication();
~DCommunication();
DCommunication(int inputPort,int inputSenlen,unsigned char far inputBlack[],int inputTime_out);
void get(int order,int port,int senlen,unsigned char far black[]);
int isSendSuccess();
DCommunication& subCom3(DCommunication&);
DCommunication& receiveCommand(DCommunication&);
};
int DCommunication::isSendSuccess(){ return status;}
DCommunication& DCommunication::subCom3(DCommunication&)
{
MakeVerify1((char *)block, sendlen);
do{
if((time_out++>250)||(kbhit()))
{
status = 0;
return *this;
}
ret = rport2(port,&getdata);
}while(ret==NODATA);
if(getdata== MC_REQDATA)
{
sport2(port, SC_SENDANSWER);
SendStringEcho3(port,(char *)block,sendlen);
//wait answer
for(count=0;count