www.pudn.com > EBDSAM7S64-Basic-ADS.rar > Cstartup_SAM7.c

//*---------------------------------------------------------------------------- 
//*         ATMEL Microcontroller Software Support  -  ROUSSET  - 
//*---------------------------------------------------------------------------- 
//* The software is delivered "AS IS" without warranty or condition of any 
//* kind, either express, implied or statutory. This includes without 
//* limitation any warranty or condition with respect to merchantability or 
//* fitness for any particular purpose, or against the infringements of 
//* intellectual property rights of others. 
//*---------------------------------------------------------------------------- 
//* File Name           : Cstartup_SAM7.c 
//* Object              : Low level initializations written in C for IAR 
//*                       tools 
//* 1.0   08/Sep/04 JPP	: Creation 
//* 1.10  10/Sep/04 JPP : Update AT91C_CKGR_PLLCOUNT filed 
//*---------------------------------------------------------------------------- 
 
 
// Include the board file description 
#include  
#include  
#include "Board.h" 
 
// The following functions must be write in ARM mode this function called directly 
// by exception vector 
extern void AT91F_Spurious_handler(void); 
extern void AT91F_Default_IRQ_handler(void); 
extern void AT91F_Default_FIQ_handler(void); 
 
//*---------------------------------------------------------------------------- 
//* \fn    AT91F_DBGU_Printk 
//* \brief This function is used to send a string through the DBGU channel (Very low level debugging) 
//*---------------------------------------------------------------------------- 
void AT91F_DBGU_Printk( 
	char *buffer) // \arg pointer to a string ending by \0 
{ 
	while(*buffer != '\0') { 
		while (!AT91F_US_TxReady((AT91PS_USART)AT91C_BASE_DBGU)); 
		AT91F_US_PutChar((AT91PS_USART)AT91C_BASE_DBGU, *buffer++); 
	} 
} 
 
//*---------------------------------------------------------------------------- 
//* \fn    AT91F_DBGU_getc 
//* \brief This function is used to receive a character to the DBGU channel 
//*---------------------------------------------------------------------------- 
char AT91F_DBGU_getc(void) 
{ 
	while (!AT91F_US_RxReady((AT91PS_USART)AT91C_BASE_DBGU)); 
	return AT91F_US_GetChar((AT91PS_USART) AT91C_BASE_DBGU); 
} 
 
void uprintf(char *fmt,...) 
{ 
    va_list ap; 
    char string[256]; 
    va_start(ap,fmt); 
    vsprintf(string,fmt,ap); 
    AT91F_DBGU_Printk(string); 
    va_end(ap); 
} 
 
//*---------------------------------------------------------------------------- 
//* \fn    AT91F_LowLevelInit 
//* \brief This function performs very low level HW initialization 
//*        this function can be use a Stack, depending the compilation 
//*        optimization mode 
//*---------------------------------------------------------------------------- 
void AT91F_LowLevelInit( void) 
{ 
 int            i; 
 AT91PS_PMC     pPMC = AT91C_BASE_PMC; 
    //* Set Flash Waite sate 
	//  Single Cycle Access at Up to 30 MHz, or 40 
	//  if MCK = 47923200 I have 50 Cycle for 1 useconde ( flied MC_FMR->FMCN 
	    AT91C_BASE_MC->MC_FMR = ((AT91C_MC_FMCN)&(50 <<16)) | AT91C_MC_FWS_1FWS ; 
 
    //* Watchdog Disable 
        AT91C_BASE_WDTC->WDTC_WDMR= AT91C_SYSC_WDDIS; 
 
	//* Set MCK at 47 923 200 
    // 1 Enabling the Main Oscillator: 
        // SCK = 1/32768 = 30.51 uSeconde 
    	// Start up time = 8 * 6 / SCK = 56 * 30.51 = 1,46484375 ms 
       pPMC->PMC_MOR = (( AT91C_CKGR_OSCOUNT & (0x06 <<8) | AT91C_CKGR_MOSCEN )); 
        // Wait the startup time 
        while(!(pPMC->PMC_SR & AT91C_PMC_MOSCS)); 
	// 2 Checking the Main Oscillator Frequency (Optional) 
	// 3 Setting PLL and divider: 
		// - div by 5 Fin = 3,6864 =(18,432 / 5) 
		// - Mul 25+1: Fout =	95,8464 =(3,6864 *26) 
		// for 96 MHz the erroe is 0.16% 
		// Field out NOT USED = 0 
       pPMC->PMC_PLLR = ((AT91C_CKGR_DIV & 14) | 
                         (AT91C_CKGR_PLLCOUNT & (10<<8)) | 
                         (AT91C_CKGR_MUL & (72<<16))); 
 
        // Wait the startup time 
        while(!(pPMC->PMC_SR & AT91C_PMC_LOCK)); 
	// 4. Selection of Master Clock and Processor Clock 
        // select the PLL clock divided by 2 
	    pPMC->PMC_MCKR = AT91C_PMC_CSS_PLL_CLK | AT91C_PMC_PRES_CLK_2 ; 
	// Set up the default interrupts handler vectors 
	AT91C_BASE_AIC->AIC_SVR[0] = (int) AT91F_Default_FIQ_handler ; 
	for (i=1;i < 31; i++) 
	{ 
	    AT91C_BASE_AIC->AIC_SVR[i] = (int) AT91F_Default_IRQ_handler ; 
	} 
	AT91C_BASE_AIC->AIC_SPU  = (int) AT91F_Spurious_handler ; 
	 
	 
	// Open PIO for DBGU 
	AT91F_DBGU_CfgPIO(); 
	 
	// Configure DBGU 
	AT91F_US_Configure ( 
		(AT91PS_USART) AT91C_BASE_DBGU,          // DBGU base address 
		MCK,            // 48 MHz 
		AT91C_US_ASYNC_MODE ,        // mode Register to be programmed 
		AT91C_DBGU_BAUD ,                   // baudrate to be programmed 
		0);                        // timeguard to be programmed 
 
	// Enable Transmitter 
	AT91F_US_EnableTx((AT91PS_USART) AT91C_BASE_DBGU); 
	 
	// Enable Receiver 
	AT91F_US_EnableRx((AT91PS_USART) AT91C_BASE_DBGU);	 
 
	AT91F_DBGU_Printk("AT91SAM7S64_LowLevelInit()\n\r");	 
	 
 
}