www.pudn.com > MPC8241BSP.rar > README

 
                 README: Motorola PrPMC600 
 
This file contains board-specific information for the Motorola PrPMC600 in 
support of the prpmc600 BSP.  Specifically, this file contains information on 
any BSP interface changes from previous software or hardware versions, and 
contains caveats that the user must be aware of before using this BSP. 
Additionally, the target board's manual page entry (for example,  
prpmc600/target.nr) provides board-specific information necessary to run 
VxWorks, and should be read before this BSP is used. 
 
------------------------------------------------------------------------------- 
EARLY ACCESS RELEASE (BSP Version 1.2/0.1): 
 
	This BSP supports the PrPMC600. 
 
        This release is the first version of the BSP for the Motorola PrPMC600 
        board on the Tornado 2.0 release.  It will also work on Tornado 1.0.1 
	if SENS is installed.  This is a SENS only BSP! 
 
  **************************************************************************** 
  ****  A REQUIREMENT FOR THIS BSP TO WORK IS THE VPD AND ETHERNET SROMS  **** 
  ****  ON THE BOARD MUST BE PROGRAMMED CORRECTLY!!!!  IF THEY ARE        **** 
  ****  INCORRECT OR NOT PROGRAMMED, THE BSP WILL NOT RUN.                **** 
  **************************************************************************** 
 
Known problems: 
 
   1.) Super I/O port may lock up under heavy loading. 
       This is fixed in i8250Sio.c available in the T2 Cumulative Patch 2 
       available on WindSurf. 
 
   2.) Under Project, a complete path name to the extra "obj" object modules 
       must be defined in the EXTRA_MODULES macro.  Refer to SPR #27955 on 
       WindSurf for additional information. 
       Specifically, this means that the i82559 driver (i82559Drv.obj and 
       i82559DrvEnd.obj) must be included in EXTRA_MODULES.  For example: 
 
       C:\Tornado2\\i82559DrvEnd.obj C:\Tornado2\\i82559Drv.obj 
 
 
/***************************************************************************** 
* 
*	Obtaining Technical Assistance with your Early Access Release 
*/ 
  
  
For technical assistance please contact your Motorola Systems Engineer. 
Please have the following information available. 
  
SYNOPSIS OF PROBLEM     :  
PRIMARY AFFECTED MODULE :  
PRODUCT NAME            : PrPMC600 EARLY ACCESS BSP 
RELEASE                 : 1.2/0.2 
DATE                    :  
REPORTED BY             :  
    CONTACT             :  
    COMPANY             :  
    EMAIL               :  
    ADDRESS             :  
    PHONE               :  
 
SYSTEM CONFIGURATION    :  
    HOST                :  
    TARGET              :  
    OTHER PERIPHERALS   :  
 
DESCRIPTION OF PROBLEM  :  
 
 
DEMONSTRATION PROCEDURE :  
 
 
WORK-AROUND / SOLUTION  :