www.pudn.com > SCIB_RS232.rar > F2812_nobios_noflash_signal_processor.pjt

; Code Composer Project File, Version 2.0 (do not modify or remove this line) 
 
[Project Settings] 
ProjectDir="E:\PROJECT\Forest_MetreWave_ScoutRadar\PROJECT\DSP\SCIB_RS232\" 
ProjectType=Executable 
CPUFamily=TMS320C28XX 
Tool="Compiler" 
Tool="DspBiosBuilder" 
Tool="Linker" 
Config="Debug" 
Config="Release" 
 
[Source Files] 
Source="C:\ti\c2000\cgtools\lib\rts2800_ml.lib" 
Source="DSP281x_CodeStartBranch.asm" 
Source="DSP281x_CpuTimers.c" 
Source="DSP281x_DefaultIsr.c" 
Source="DSP281x_GlobalVariableDefs.c" 
Source="DSP281x_Gpio.c" 
Source="DSP281x_InitPeripherals.c" 
Source="DSP281x_PieCtrl.c" 
Source="DSP281x_PieVect.c" 
Source="DSP281x_Sci.c" 
Source="DSP281x_SysCtrl.c" 
Source="DSP281x_Xintf.c" 
Source="DSP281x_XIntrupt.c" 
Source="DSP28_ECan.c" 
Source="eCAN_RX.c" 
Source="eCAN_TX.c" 
Source="F2812communication.c" 
Source="F2812_nobios_noflash_signal_processor.cmd" 
 
["Compiler" Settings: "Debug"] 
Options=-g -q -fr"E:\PROJECT\Forest_MetreWave_ScoutRadar\PROJECT\DSP\SCIB_RS232\Debug" -d"_DEBUG" -d"LARGE_MODEL" -ml -v28 
 
["Compiler" Settings: "Release"] 
Options=-q -o3 -fr"E:\PROJECT\Forest_MetreWave_ScoutRadar\PROJECT\DSP\SCIB_RS232\Release" -d"LARGE_MODEL" -ml -v28 
 
["DspBiosBuilder" Settings: "Debug"] 
Options=-v28 
 
["DspBiosBuilder" Settings: "Release"] 
Options=-v28 
 
["Linker" Settings: "Debug"] 
Options=-q -c -m".\Debug\2812.map" -o".\Debug\2812.out" -x 
 
["Linker" Settings: "Release"] 
Options=-q -c -m".\Release\2812.map" -o".\Release\2812.out" -x 
 
["C:\ti\c2000\cgtools\lib\rts2800_ml.lib" Settings: "Debug"] 
LinkOrder=2 
 
["DSP281x_CodeStartBranch.asm" Settings: "Debug"] 
LinkOrder=1 
 
["DSP281x_DefaultIsr.c" Settings: "Debug"] 
LinkOrder=3 
 
["DSP281x_GlobalVariableDefs.c" Settings: "Debug"] 
LinkOrder=4 
 
["DSP281x_Gpio.c" Settings: "Debug"] 
LinkOrder=5 
 
["DSP281x_InitPeripherals.c" Settings: "Debug"] 
LinkOrder=10 
 
["DSP281x_PieCtrl.c" Settings: "Debug"] 
LinkOrder=6 
 
["DSP281x_PieVect.c" Settings: "Debug"] 
LinkOrder=7 
 
["DSP281x_Sci.c" Settings: "Debug"] 
LinkOrder=8 
 
["DSP281x_SysCtrl.c" Settings: "Debug"] 
LinkOrder=9 
 
["DSP281x_Xintf.c" Settings: "Debug"] 
LinkOrder=11 
 
["DSP281x_XIntrupt.c" Settings: "Debug"] 
LinkOrder=12 
 
["F2812communication.c" Settings: "Debug"] 
LinkOrder=14