www.pudn.com > TMS320F2812mcbsp.rar > MCBSP.pjt

; Code Composer Project File, Version 2.0 (do not modify or remove this line) 
 
[Project Settings] 
ProjectName="MCBSP" 
ProjectDir="C:\ti\myprojects\mcbsp\" 
ProjectType=Executable 
CPUFamily=TMS320C28XX 
Tool="Compiler" 
Tool="Linker" 
Config="Debug" 
Config="Release" 
 
[Source Files] 
Source="DSP28_Adc.c" 
Source="DSP28_CpuTimers.c" 
Source="DSP28_DefaultIsr.c" 
Source="DSP28_ECan.c" 
Source="DSP28_Ev.c" 
Source="DSP28_GlobalVariableDefs.c" 
Source="DSP28_Gpio.c" 
Source="DSP28_InitPeripherals.c" 
Source="DSP28_Mcbsp.c" 
Source="DSP28_PieCtrl.c" 
Source="DSP28_PieVect.c" 
Source="DSP28_Sci.c" 
Source="DSP28_Spi.c" 
Source="DSP28_SysCtrl.c" 
Source="DSP28_Xintf.c" 
Source="DSP28_XIntrupt.c" 
Source="MCBSP_TEST.c" 
Source="rts2800.lib" 
Source="SRAM.cmd" 
 
["Compiler" Settings: "Debug"] 
Options=-g -q -fr"C:\ti\myprojects\MCBSP\Debug" -d"_DEBUG" -d"LARGE_MODEL" -ml -v28 
 
["Compiler" Settings: "Release"] 
Options=-q -o3 -fr"C:\ti\myprojects\MCBSP\Release" -d"LARGE_MODEL" -ml -v28 
 
["Linker" Settings: "Debug"] 
Options=-q -c -m".\Debug\MCBSP.map" -o".\Debug\MCBSP.out" -x 
 
["Linker" Settings: "Release"] 
Options=-q -c -o".\Release\MCBSP.out" -x 
 
["DSP28_Adc.c" Settings: "Debug"] 
LinkOrder=2 
 
["DSP28_CpuTimers.c" Settings: "Debug"] 
LinkOrder=3 
 
["DSP28_DefaultIsr.c" Settings: "Debug"] 
LinkOrder=4 
 
["DSP28_ECan.c" Settings: "Debug"] 
LinkOrder=5 
 
["DSP28_Ev.c" Settings: "Debug"] 
LinkOrder=6 
 
["DSP28_GlobalVariableDefs.c" Settings: "Debug"] 
LinkOrder=7 
 
["DSP28_Gpio.c" Settings: "Debug"] 
LinkOrder=8 
 
["DSP28_InitPeripherals.c" Settings: "Debug"] 
LinkOrder=9 
 
["DSP28_Mcbsp.c" Settings: "Debug"] 
LinkOrder=10 
 
["DSP28_PieCtrl.c" Settings: "Debug"] 
LinkOrder=11 
 
["DSP28_PieVect.c" Settings: "Debug"] 
LinkOrder=12 
 
["DSP28_Sci.c" Settings: "Debug"] 
LinkOrder=13 
 
["DSP28_Spi.c" Settings: "Debug"] 
LinkOrder=14 
 
["DSP28_SysCtrl.c" Settings: "Debug"] 
LinkOrder=15 
 
["DSP28_Xintf.c" Settings: "Debug"] 
LinkOrder=16 
 
["DSP28_XIntrupt.c" Settings: "Debug"] 
LinkOrder=17 
 
["MCBSP_TEST.c" Settings: "Debug"] 
LinkOrder=1 
 
["rts2800.lib" Settings: "Debug"] 
LinkOrder=18