www.pudn.com > lpc213X_C_application.rar > config.h, change:2004-09-24,size:4018b

/****************************************Copyright (c)************************************************** 
**                               Guangzou ZLG-MCU Development Co.,LTD. 
**                                      graduate school 
**                                 http://www.zlgmcu.com 
** 
**--------------File Info------------------------------------------------------------------------------- 
** File Name: config.h 
** Last modified Date:  2004-09-17 
** Last Version: 1.0 
** Descriptions: User Configurable File 
** 
**------------------------------------------------------------------------------------------------------ 
** Created By: Chenmingji 
** Created date:   2004-09-17 
** Version: 1.0 
** Descriptions: First version 
** 
**------------------------------------------------------------------------------------------------------ 
** Modified by: 
** Modified date: 
** Version: 
** Descriptions: 
** 
********************************************************************************************************/ 
#ifndef __CONFIG_H  
#define __CONFIG_H 
 
//This segment should not be modified 
#ifndef TRUE 
#define TRUE  1 
#endif 
 
#ifndef FALSE 
#define FALSE 0 
#endif 
 
typedef unsigned char  uint8;                   /* defined for unsigned 8-bits integer variable 	无符号8位整型变量  */ 
typedef signed   char  int8;                    /* defined for signed 8-bits integer variable		有符号8位整型变量  */ 
typedef unsigned short uint16;                  /* defined for unsigned 16-bits integer variable 	无符号16位整型变量 */ 
typedef signed   short int16;                   /* defined for signed 16-bits integer variable 		有符号16位整型变量 */ 
typedef unsigned int   uint32;                  /* defined for unsigned 32-bits integer variable 	无符号32位整型变量 */ 
typedef signed   int   int32;                   /* defined for signed 32-bits integer variable 		有符号32位整型变量 */ 
typedef float          fp32;                    /* single precision floating point variable (32bits) 单精度浮点数（32位长度） */ 
typedef double         fp64;                    /* double precision floating point variable (64bits) 双精度浮点数（64位长度） */ 
 
/********************************/ 
/*      ARM specital code      */ 
/*      ARM的特殊代码           */ 
/********************************/ 
//This segment should not be modify 
//这一段无需改动 
 
#include    "LPC2294.h" 
 
 
/********************************/ 
/*Application Program Configurations*/ 
/*     应用程序配置             */ 
/********************************/ 
//This segment could be modified as needed. 
//以下根据需要改动 
 
/********************************/ 
/*Configuration of the example */ 
/*     本例子的配置             */ 
/********************************/ 
/* System configuration .Fosc、Fcclk、Fcco、Fpclk must be defined */ 
/* 系统设置, Fosc、Fcclk、Fcco、Fpclk必须定义*/ 
#define Fosc            11059200                    //Crystal frequence,10MHz~25MHz，should be the same as actual status.  
						    //应当与实际一至晶振频率,10MHz~25MHz，应当与实际一至 
#define Fcclk           (Fosc * 4)                  //System frequence,should be (1~32)multiples of Fosc,and should be equal or less  than 60MHz.  
						    //系统频率，必须为Fosc的整数倍(1~32)，且<=60MHZ 
#define Fcco            (Fcclk * 4)                 //CCO frequence,should be 2、4、8、16 multiples of Fcclk, ranged from 156MHz to 320MHz.  
						    //CCO频率，必须为Fcclk的2、4、8、16倍，范围为156MHz~320MHz 
#define Fpclk           (Fcclk / 4) * 1             //VPB clock frequence , must be 1、2、4 multiples of (Fcclk / 4). 
						    //VPB时钟频率，只能为(Fcclk / 4)的1、2、4倍 
 
#include    "target.h"              //This line may not be deleted 这一句不能删除 
 
#endif 
/********************************************************************************************************* 
**                            End Of File 
********************************************************************************************************/