www.pudn.com > vcom.zip > ComfilntDevice.h

// ComfilntDevice.h 
// 
// Generated by DriverWizard version DriverStudio 2.5.0 (Build 240) 
// Requires Compuware's DriverWorks classes 
// 
#include  
 
#ifndef __ComfilntDevice_h__ 
#define __ComfilntDevice_h__ 
// 
// These defines are used to set the line control register. 
// 
#define SERIAL_5_DATA       ((UCHAR)0x00) 
#define SERIAL_6_DATA       ((UCHAR)0x01) 
#define SERIAL_7_DATA       ((UCHAR)0x02) 
#define SERIAL_8_DATA       ((UCHAR)0x03) 
#define SERIAL_DATA_MASK    ((UCHAR)0x03) 
 
#define SERIAL_1_STOP       ((UCHAR)0x00) 
#define SERIAL_1_5_STOP     ((UCHAR)0x04) // Only valid for 5 data bits 
#define SERIAL_2_STOP       ((UCHAR)0x04) // Not valid for 5 data bits 
#define SERIAL_STOP_MASK    ((UCHAR)0x04) 
 
#define SERIAL_NONE_PARITY  ((UCHAR)0x00) 
#define SERIAL_ODD_PARITY   ((UCHAR)0x08) 
#define SERIAL_EVEN_PARITY  ((UCHAR)0x18) 
#define SERIAL_MARK_PARITY  ((UCHAR)0x28) 
#define SERIAL_SPACE_PARITY ((UCHAR)0x38) 
#define SERIAL_PARITY_MASK  ((UCHAR)0x38) 
 
#define EV_RXCHAR           0x0001  // Any Character received 
#define EV_RXFLAG           0x0002  // Received certain character 
#define EV_TXEMPTY          0x0004  // Transmitt Queue Empty 
#define EV_CTS              0x0008  // CTS changed state 
#define EV_DSR              0x0010  // DSR changed state 
#define EV_RLSD             0x0020  // RLSD changed state 
#define EV_BREAK            0x0040  // BREAK received 
#define EV_ERR              0x0080  // Line status error occurred 
#define EV_RING             0x0100  // Ring signal detected 
#define EV_PERR             0x0200  // Printer error occured 
#define EV_RX80FULL         0x0400  // Receive buffer is 80 percent full 
#define EV_EVENT1           0x0800  // Provider specific event 1 
#define EV_EVENT2           0x1000  // Provider specific event 2 
 
/* 
typedef struct _READWRITE_FIFO{ 
	KFifo PipeA; 
	KFifo PipeB; 
	KFifo BytePipe; 
} RW_FIFO; 
	RW_FIFO rw_fifo[5]; 
*/ 
class ComfilntDevice : public KDevice 
{ 
	// Constructors 
public: 
	SAFE_DESTRUCTORS; 
	ComfilntDevice(ULONG Unit,PRW pRW); 
	~ComfilntDevice(); 
//	KFifo BytePipe(0x100, NonPagedPool); 
//	KFifo BytePipe; 
// 
//	RW_FIFO rw_fifo[5]; 
// This structure is used to get the current error and 
// general status of the driver. 
// 
/* 
typedef struct _SERIAL_STATUS { 
    ULONG Errors; 
    ULONG HoldReasons; 
    ULONG AmountInInQueue; 
    ULONG AmountInOutQueue; 
    BOOLEAN EofReceived; 
    BOOLEAN WaitForImmediate; 
    } SERIAL_STATUS,*PSERIAL_STATUS; 
*/ 
SERIAL_STATUS CommStatus; 
 
	// Member Functions 
public: 
	ULONG m_IsOpened; 
//	KFifo * m_PipeB; 
//	KFifo * m_PipeA; 
	PRW m_pRW; 
	DEVMEMBER_DISPATCHERS 
 
#ifdef __COMMENT_ONLY 
		// The following member functions are actually defined by the 
		// a DEVMEMBER_XXX macro (such as DEVMEMBER_DISPATCHERS). 
		// The macro __COMMENT_ONLY never gets defined.  These comment-only 
		// definitions simply allow easy navigation to the functions within 
		// the Developer Studio using the class browser. 
 
	virtual NTSTATUS CleanUp(KIrp I); 				// COMMENT_ONLY 
	virtual NTSTATUS Close(KIrp I);					// COMMENT_ONLY 
	virtual NTSTATUS Create(KIrp I); 				// COMMENT_ONLY 
	virtual NTSTATUS DeviceControl(KIrp I);			// COMMENT_ONLY 
	virtual NTSTATUS FlushBuffers(KIrp I);		   	// COMMENT_ONLY 
	virtual NTSTATUS Read(KIrp I);			  		// COMMENT_ONLY 
	virtual NTSTATUS Write(KIrp I);					// COMMENT_ONLY 
#endif 
	virtual VOID IoctlGetCommStatus(SERIAL_STATUS& Status); 
	virtual VOID IoctlGetBaudRate(SERIAL_BAUD_RATE& BaudRate); 
	virtual NTSTATUS IoctlSetHandFlow(SERIAL_HANDFLOW& HandFlow); 
	virtual VOID IoctlGetTimeOuts(SERIAL_TIMEOUTS& TimeOuts); 
	virtual VOID IoctlSetTimeOuts(SERIAL_TIMEOUTS& TimeOuts); 
	virtual VOID IoctlGetSpecialCharacters(SERIAL_CHARS& Chars); 
	virtual VOID IoctlSetSpecialCharacters(SERIAL_CHARS& Chars); 
	virtual VOID IoctlGetStatistics(SERIALPERF_STATS& Stats); 
	virtual VOID IoctlClearStatistics(void); 
	virtual ULONG IoctlGetWaitMask(void); 
	virtual NTSTATUS IoctlSetWaitMask(ULONG mask); 
	virtual VOID IoctlGetProperties(SERIAL_COMMPROP& Properties); 
	virtual ULONG IoctlGetModemStatus(void); 
//	virtual VOID IoctlGetCommStatus(SERIAL_STATUS& CommStatus); 
	virtual VOID IoctlPurge(ULONG PurgeMask); 
	virtual NTSTATUS IoctlSetQueueSize(SERIAL_QUEUE_SIZE& QueueSizes); 
	virtual VOID IoctlGetHandFlow(SERIAL_HANDFLOW& HandFlow); 
	virtual VOID IoctlSetBaudRate(SERIAL_BAUD_RATE& BaudRate); 
	virtual VOID IoctlGetLineControl(SERIAL_LINE_CONTROL& LineControl); 
	virtual NTSTATUS IoctlSetLineControl(SERIAL_LINE_CONTROL& LineControl); 
	// Member Data 
protected: 
		// Unit number for this device instance 
	ULONG				m_Unit; 
		// Used in constructor/destructor to hold registry path 
	KUnitizedName *		m_RegPath; 
	ULONG				m_SupportedEvents; 
#if NTVERSION > 351 
	SERIALPERF_STATS	m_Statistics; 
#endif 
	SERIAL_BAUD_RATE	m_BaudRate; 
	SERIAL_HANDFLOW		m_Handflow; 
	SERIAL_CHARS		m_Chars; 
	UCHAR				m_LineControl; 
	ULONG				m_WaitMask; 
	ULONG				m_WriteCount; 
	ULONG				m_EventState; 
	SERIAL_TIMEOUTS		m_Timeouts; 
	ULONG				m_ErrorState; 
	ULONG				m_EvenMask; 
// 
// All allowed purge flags 
// 
#define VALID_PURGE_MASK (	\ 
	SERIAL_PURGE_TXABORT|	\ 
	SERIAL_PURGE_RXABORT|	\ 
	SERIAL_PURGE_TXCLEAR|	\ 
	SERIAL_PURGE_RXCLEAR) 
}; 
 
 
#endif		// __ComfilntDevice_h__