www.pudn.com > USB2.0_rtl_ipcore_verilog.rar > usbf_defines.v
///////////////////////////////////////////////////////////////////// //// //// //// USB function defines file //// //// //// //// //// //// Author: Rudolf Usselmann //// //// rudi@asics.ws //// //// //// //// //// //// Downloaded from: http://www.opencores.org/cores/usb/ //// //// //// ///////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000-2003 Rudolf Usselmann //// //// www.asics.ws //// //// rudi@asics.ws //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer.//// //// //// //// THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY //// //// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED //// //// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS //// //// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR //// //// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, //// //// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES //// //// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE //// //// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR //// //// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF //// //// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT //// //// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT //// //// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE //// //// POSSIBILITY OF SUCH DAMAGE. //// //// //// ///////////////////////////////////////////////////////////////////// // CVS Log // // $Id: usbf_defines.v,v 1.6 2003/10/17 02:36:57 rudi Exp $ // // $Date: 2003/10/17 02:36:57 $ // $Revision: 1.6 $ // $Author: rudi $ // $Locker: $ // $State: Exp $ // // Change History: // $Log: usbf_defines.v,v $ // Revision 1.6 2003/10/17 02:36:57 rudi // - Disabling bit stuffing and NRZI encoding during speed negotiation // - Now the core can send zero size packets // - Fixed register addresses for some of the higher endpoints // (conversion between decimal/hex was wrong) // - The core now does properly evaluate the function address to // determine if the packet was intended for it. // - Various other minor bugs and typos // // Revision 1.5 2001/11/04 12:22:43 rudi // // - Fixed previous fix (brocke something else ...) // - Majore Synthesis cleanup // // Revision 1.4 2001/09/23 08:39:33 rudi // // Renamed DEBUG and VERBOSE_DEBUG to USBF_DEBUG and USBF_VERBOSE_DEBUG ... // // Revision 1.3 2001/09/13 13:14:02 rudi // // Fixed a problem that would sometimes prevent the core to come out of // reset and immediately be operational ... // // Revision 1.2 2001/08/10 08:48:33 rudi // // - Changed IO names to be more clear. // - Uniquifyed define names to be core specific. // // Revision 1.1 2001/08/03 05:30:09 rudi // // // 1) Reorganized directory structure // // Revision 1.2 2001/03/31 13:00:52 rudi // // - Added Core configuration // - Added handling of OUT packets less than MAX_PL_SZ in DMA mode // - Modified WISHBONE interface and sync logic // - Moved SSRAM outside the core (added interface) // - Many small bug fixes ... // // Revision 1.0 2001/03/07 09:17:12 rudi // // // Changed all revisions to revision 1.0. This is because OpenCores CVS // interface could not handle the original '0.1' revision .... // // Revision 0.2 2001/03/07 09:08:13 rudi // // Added USB control signaling (Line Status) block. Fixed some minor // typos, added resume bit and signal. // // Revision 0.1.0.1 2001/02/28 08:11:35 rudi // Initial Release // // `timescale 1ns / 10ps // Uncomment the lines below to get various levels of debugging // verbosity ... `define USBF_DEBUG `define USBF_VERBOSE_DEBUG // Uncomment the line below to run the test bench // Comment it out to use your own address parameters ... `define USBF_TEST_IMPL // For each endpoint that should actually be instantiated, // set the below define value to a one. Uncomment the define // statement for unused endpoints. The endpoints should be // sequential, e.q. 1,2,3. I have not tested what happens if // you select endpoints in a non sequential manner e.g. 1,4,6 // Actual (logical) endpoint IDs are set by the software. There // is no correlation between the physical endpoint number (below) // and the actual (logical) endpoint number. `ifdef USBF_TEST_IMPL // Do not modify this section // this is to run the test bench `define USBF_HAVE_EP1 1 `define USBF_HAVE_EP2 1 `define USBF_HAVE_EP3 1 `else // Modify this section to suit your implementation `define USBF_HAVE_EP1 1 `define USBF_HAVE_EP2 1 `define USBF_HAVE_EP3 1 `define USBF_HAVE_EP4 1 //`define USBF_HAVE_EP5 1 //`define USBF_HAVE_EP6 1 //`define USBF_HAVE_EP7 1 //`define USBF_HAVE_EP8 1 //`define USBF_HAVE_EP9 1 //`define USBF_HAVE_EP10 1 //`define USBF_HAVE_EP11 1 //`define USBF_HAVE_EP12 1 //`define USBF_HAVE_EP13 1 //`define USBF_HAVE_EP14 1 //`define USBF_HAVE_EP15 1 `endif // Highest address line number that goes to the USB core // Typically only A0 through A17 are needed, where A17 // selects between the internal buffer memory and the // register file. // Implementations may choose to have a more complex address // decoding .... `ifdef USBF_TEST_IMPL // Do not modify this section // this is to run the test bench `define USBF_UFC_HADR 17 // `define USBF_RF_SEL (!wb_addr_i[17]) // `define USBF_MEM_SEL (wb_addr_i[17]) `define USBF_RF_SEL !haddr[17] `define USBF_MEM_SEL haddr[17] `define USBF_SSRAM_HADR 14 //`define USBF_ASYNC_RESET `else // Modify this section to suit your implementation `define USBF_UFC_HADR 12 // Address Decoding for Register File select `define USBF_RF_SEL (!wb_addr_i[12]) // Address Decoding for Buffer Memory select `define USBF_MEM_SEL (wb_addr_i[12]) `define USBF_SSRAM_HADR 9 // The next statement determines if reset is async or sync. // If the define is uncommented the reset will be ASYNC. //`define USBF_ASYNC_RESET `endif ///////////////////////////////////////////////////////////////////// // // Items below this point should NOT be modified by the end user // UNLESS you know exactly what you are doing ! // Modify at you own risk !!! // ///////////////////////////////////////////////////////////////////// // PID Encodings `define USBF_T_PID_OUT 4'b0001 `define USBF_T_PID_IN 4'b1001 `define USBF_T_PID_SOF 4'b0101 `define USBF_T_PID_SETUP 4'b1101 `define USBF_T_PID_DATA0 4'b0011 `define USBF_T_PID_DATA1 4'b1011 `define USBF_T_PID_DATA2 4'b0111 `define USBF_T_PID_MDATA 4'b1111 `define USBF_T_PID_ACK 4'b0010 `define USBF_T_PID_NACK 4'b1010 `define USBF_T_PID_STALL 4'b1110 `define USBF_T_PID_NYET 4'b0110 `define USBF_T_PID_PRE 4'b1100 `define USBF_T_PID_ERR 4'b1100 `define USBF_T_PID_SPLIT 4'b1000 `define USBF_T_PID_PING 4'b0100 `define USBF_T_PID_RES 4'b0000 // The HMS_DEL is a constant for the "Half Micro Second" // Clock pulse generator. This constant specifies how many // Phy clocks there are between two hms_clock pulses. This // constant plus 2 represents the actual delay. // Example: For a 60 Mhz (16.667 nS period) Phy Clock, the // delay must be 30 phy clocks: 500ns / 16.667nS = 30 clocks `define USBF_HMS_DEL 5'h1c // After sending Data in response to an IN token from host, the // host must reply with an ack. The host has 622nS in Full Speed // mode and 400nS in High Speed mode to reply. RX_ACK_TO_VAL_FS // and RX_ACK_TO_VAL_HS are the numbers of UTMI clock cycles // minus 2 for Full and High Speed modes. `define USBF_RX_ACK_TO_VAL_FS 8'd36 `define USBF_RX_ACK_TO_VAL_HS 8'd22 // After sending an OUT token the host must send a data packet. // The host has 622nS in Full Speed mode and 400nS in High Speed // mode to send the data packet. // TX_DATA_TO_VAL_FS and TX_DATA_TO_VAL_HS are is the numbers of // UTMI clock cycles minus 2. `define USBF_TX_DATA_TO_VAL_FS 8'd36 `define USBF_TX_DATA_TO_VAL_HS 8'd22 // -------------------------------------------------- // USB Line state & Speed Negotiation Time Values // Prescaler Clear value. // The prescaler generates a 0.25uS pulse, from a nominal PHY clock of // 60 Mhz. 250nS/16.667ns=15. The prescaler has to be cleared every 15 // cycles. Due to the pipeline, subtract 2 from 15, resulting in 13 cycles. // !!! This is the only place that needs to be changed if a PHY with different // !!! clock output is used. `define USBF_T1_PS_250_NS 4'd13 // uS counter representation of 2.5uS (2.5/0.25=10) `define USBF_T1_C_2_5_US 8'd10 // uS counter clear value // The uS counter counts the time in 0.25uS intervals. It also generates // a count enable to the mS counter, every 62.5 uS. // The clear value is 62.5uS/0.25uS=250 cycles. `define USBF_T1_C_62_5_US 8'd250 // mS counter representation of 3.0mS (3.0/0.0625=48) `define USBF_T1_C_3_0_MS 8'd48 // mS counter representation of 3.125mS (3.125/0.0625=50) `define USBF_T1_C_3_125_MS 8'd50 // mS counter representation of 5mS (5/0.0625=80) `define USBF_T1_C_5_MS 8'd80 // Multi purpose Counter Prescaler, generate 2.5 uS period // 2500/16.667ns=150 (minus 2 for pipeline) `define USBF_T2_C_2_5_US 8'd148 // Generate 0.5mS period from the 2.5 uS clock // 500/2.5 = 200 `define USBF_T2_C_0_5_MS 8'd200 // Indicate when internal wakeup has completed // me_cnt counts 0.5 mS intervals. E.g.: 5.0mS are (5/0.5) 10 ticks // Must be 0 =< 10 mS `define USBF_T2_C_WAKEUP 8'd10 // Indicate when 100uS have passed // me_ps2 counts 2.5uS intervals. 100uS are (100/2.5) 40 ticks `define USBF_T2_C_100_US 8'd40 // Indicate when 1.0 mS have passed // me_cnt counts 0.5 mS intervals. 1.0mS are (1/0.5) 2 ticks `define USBF_T2_C_1_0_MS 8'd2 // Indicate when 1.2 mS have passed // me_cnt counts 0.5 mS intervals. 1.2mS are (1.2/0.5) 2 ticks `define USBF_T2_C_1_2_MS 8'd2 // Indicate when 100 mS have passed // me_cnt counts 0.5 mS intervals. 100mS are (100/0.5) 200 ticks `ifdef SIM `define USBF_T2_C_100_MS 8'd20 `else `define USBF_T2_C_100_MS 8'd200 `endif