www.pudn.com > 04042119192.rar > english.lng

; AZPR language file 
; ================== 
 
; blank lines and lines starting from semicolons are ignored 
; 
; \r means carriage return 
; \n means line feed 
; However, do NOT add this formating characters if original string doesn't 
; use them 
 
; 
; Special fields, they will be used later like %FIELD_NAME% 
; 23/08/2000 Now these fields defined internally by program 
; 
;PROG_NAME=AZPR 
;PROG_FULLNAME=Advanced ZIP Password Recovery 
;PROG_VER=3.0 
;ASAVE_FILE=~azpr.azr 
;LOGFILE=azpr.log 
;LANGFILE_VERSION=3.0 
;PROG_EXTU=ZIP 
;PROG_EXT=zip 
;PROG_NAME_EXT=azr 
; 
; File information 
; Your name (if you so wish) and your language name defined here 
; 
TRANSLATOR=Elcom Ltd. 
LANGUAGE=English 
 
; 
; You can define national characters to use with dictionary-based attack: 
; smart mutations & all possible upper/lowercase combinations 
; First, define non-Latin capital letters 
FOREIGNCAPS= 
; and then define non-Latin small letters (in the same order 
; as capitals!) 
FOREIGNSMALL= 
; if your language doesn't use non-Latin characters, (or characters 
; can be only in upper or lowercase), leave these fields empty. 
 
; New field added at January, 7, 2000 
; This field used with dictionary-based attack/smart mutations to 
; make word "elite", i.e. vowels in lower case, other letters in upper 
; (for example, "password" becomes "PaSSWoRD") 
; This field contains only vowels (which also defined in FOREIGNCAPS field) 
FOREIGNVOWEL= 
 
;----------------------------------------------------------------------------; 
; AZPR messages                                                              ; 
;----------------------------------------------------------------------------; 
 
; Password range messages 
10=Analysing password range... 
11=Invalid minimal password length. It does not match the starting password. Minimal length has been adjusted. 
 
; Starting password messages 
12=Analysing starting password... 
13=Starting from password 
14=Last password: 
 
; Password length messages 
15=Password length = 
16=passwords to do: 
 
; Mask messages 
17=Number of not-masked symbols = 
 
; Dictionary messages 
18=Starting dictionary attack... 
 
; Registration messages 
20=is now registered ! 
21=launched, registered version 
22=launched, unregistered version, some features disabled 
23=%PROG_NAME% version %PROG_VER% - Registered 
24=%PROG_NAME% version %PROG_VER% - Not registered 
 
; Autobackup messages 
30=Performing autobackup... 
31=Auto-save directory not defined. Using path: 
32=Auto-save path is invalid 
33=Please select an auto-save folder 
34=Auto-save path selection cancelled. Auto-save now disabled 
35=Auto-save path is invalid or is not selected. Disable auto-save ? 
36=Auto-save file not defined. Using '%ASAVE_FILE%' file 
 
; Interface messages 
40=-  Untitled 
41=Do you want to save your project before quitting ? 
42=shutdown 
43=Trying to open source file 
44=File 
45=successfully opened 
 
; Project Messages 
50=New project created 
 
; Result messages 
60=Password successfully recovered ! 
61=Encryption keys successfully recovered ! 
62=is a valid password for this file 
 
; Button captions 
70=Open 
71=Save 
72=Start ! 
73=Stop 
74=Charset 
75=Benchmark 
76=Register 
77=Help 
78=About 
79=Quit 
 
; Button hints 
80=Create a new project 
81=Open project... 
82=Save project 
83=Start recovery 
84=Stop recovery 
85=Custom charset... 
86=Do speed-test 
87=Help contents 
88=About %PROG_NAME% 
89=Quit %PROG_NAME% 
 
90=Register your copy of %PROG_NAME% 
 
91=Load %PROG_EXTU%-file into the project... 
92=Select dictionary file... 
93=Select plain-text file... 
94=Select auto-save directory... 
95=Clear starting password 
96=Clear mask 
97=All latin + all digits + all special 
 
98=Clear "start from" field 
99=Search for password 
100=Decrypt %PROG_EXTU% archive using these keys 
101=Load encryption keys 
102=Clear start line 
 
; Interface captions 
110=Encrypted %PROG_EXTU%-file 
111=Dictionary options 
112=Dictionary file path: 
113=Password length options 
114=Minimal password length = 
115=Maximal password length = 
 
116=Type of attack 
117=Brute-force 
118=Mask 
119=Dictionary 
120=Plain-text 
 
121=Brute-force range options 
122=All printable 
123=Space 
124=All special symbols (!@...) 
125=All caps latin (A - Z) 
126=All small latin (a - z) 
127=All digits (0 - 9) 
128=User-defined 
129=Start from: 
130=Mask: 
131=Options 
132=Minimize to tray 
133=Enable logging to %LOGFILE% 
134=Make backup before file changing 
135=Prompt if project is changed 
136=Mask symbol: 
137=Auto-save 
138=Save project every 
139=minutes 
140=Priority options 
141=Background 
142=High 
143=Current password: 
144=Status window 
145=Progress indicator 
146=character(s) 
147=Smart mutations 
148=Try all possible upper/lower case combinations 
149=Auto-save file name: 
150=Auto-save directory: 
151=Average speed: 
152=Time elapsed: 
153=Time remaining: 
154=Password length = 
155=total: 
156=processed: 
157=Dictionary attack in progress, processed 
158=password(s) 
159=Progress bar update interval 
160=ms 
161=Start line # 
162=Plain-text options 
163=Plain-text file path: 
164=Key0: 
165=Key1: 
166=Key2: 
 
; Pagecontrol captions 
170=Range 
171=Length 
172=Dictionary 
173=Plain-text 
174=Auto-save 
175=Options 
 
; Statistics messages 
180=Total passwords 
181=Total time 
182=Average speed (passwords per second) 
183=Password for this file 
184=Password in HEX 
185=Not found 
186=%PROG_FULLNAME% statistics: 
187=Copy password to the Clipboard 
188=Copy HEX password to the Clipboard 
189=Save... 
190=Save password to file 
191=OK 
192=More than one year 
 
193=n/a 
194=Encryption keys 
195=Copy encryption keys to the Clipboard 
196=Save encryption keys to file 
 
; User charset captions 
200=User defined charset 
201=Define your charset 
202=Load charset... 
203=Save charset... 
204=Clear charset 
205=Add charset from file... 
206=OK 
207=Cancel 
208=Convert to OEM encoding 
 
; About box captions 
210=About 
211=version %PROG_VER% 
213=Open %PROG_NAME% WWW-page 
214=Open Password Recovery Software WWW-page 
215=Open Elcom Software WWW-page 
 
; Plaintext progress messages 
220=Plain-text attack is in progress, 
221=reducing number of keys 
222=searching for keys 
223=trying to retrieve any password (up to 9 symbols long) 
224=trying to retrieve printable password (up to 10 characters long) 
 
230=%PROG_NAME% %PROG_VER%. Task finished. 
231=%PROG_NAME% 
232=Unregistered %PROG_NAME% can recover passwords up to %UNREG_MAX% characters long only 
233=Archive successfully decrypted. 
234=Archive decryption error. 
235=Decryption keys are shown in registered version only. 
236=The password has been found, but it's length exceeds evaluation version limitation. 
237=Only first file from archive will be decrypted. 
 
240=No matching files in selected archives. If you'd like to run plaintext\r\nattack using only part of the file, please modify the archives so\r\neach of them will contain one file only. 
241=No matching files in selected archives. Would you like to run the\r\nplaintext attack using only part of the file? 
242=Plain-text attack status cannot be saved.\r\nDo you really want to stop it? 
243=Plain-text attack started 
 
; Benchmark messages 
250=Sorry, the benchmark is available for brute-force and brute-force\r\nwith mask attacks only. 
251=Benchmarking ... 
252=Passwords to process 
253=Work time 
 
; 
; Error messages 
; 
 
; Brute-force 
300=Invalid password range or range not defined 
301=Invalid starting password, it does not match a selected range 
302=Maximum length must be greater than minimum length 
303=Password not found 
 
; Dictionary 
304=Error opening dictionary file 
305=Start line exceeds dictionary size 
 
; Common 
310=Can not save to selected file 
311=%PROG_NAME% Error 
312=Terminated by user 
313=Auto-save path is not selected 
314=Invalid progress bar update interval 
315=Can not open this project file 
 
; Archive's open errors 
320=Can not open %PROG_EXTU% archive 
321=Selected file is not a %PROG_EXTU% archive 
322=Archive corrupted or no encrypted files 
323=Cashing error 
324=Fatal exception 
 
; Quit message 
330=Quit 
 
; Mask errors 
340=Mask not set 
341=No mask symbols found 
342=Mask does not match a starting password 
343=Mask symbol not defined 
 
; Plaintext errors 
350=Encryption keys not found 
351=Selected archive contains encrypted files only. 
352=Not enough data for plaintext attack. 
353=Plaintext attack internal error. 
354=Invalid value. 
 
;--------------------------------------- 
; New message added at December, 14 1999 
 
; Registration messages 
360=Registration 
361=Enter registration code: 
362=Thank you for registering %PROG_NAME%! 
363=The code you've entered is invalid! 
 
; Dialog headers 
370=Benchmark result 
 
; Partial plain-text attack dialog 
371=Attack using only part of the file 
372=Enter size of plain-text: 
 
; Error message used with different previously defined error messages 
380=Error: 
 
; When selecting language from options menu 
390=Language: 
 
; These message (maybe) will be used with plain-text & dictionary attack 
; %d means a number inserted by program (as in C programming language) 
400=cycle %d of %d 
401=line %d of %d 
 
; Open filters, | means delimiter 
410=Charset files (*.chr)|*.chr|All files (*.*)|*.* 
411=%PROG_NAME% status files (*.%PROG_NAME_EXT%)|*.%PROG_NAME_EXT%|All files (*.*)|*.* 
412=%PROG_EXTU% files (*.%PROG_EXT%)|*.%PROG_EXT%|SFX-%PROG_EXTU% files (*.exe)|*.exe|All files (*.*)|*.* 
413=Dictionary files (*.dic)|*.dic|Text files (*.txt)|*.txt|All files (*.*)|*.* 
414=%PROG_EXTU% files (*.%PROG_EXT%)|*.%PROG_EXT%|All files (*.*)|*.* 
415=Text files (*.txt)|*.txt|All files (*.*)|*.* 
 
;-------------------------------------- 
; New messages added at January, 7 2000 
; Command line messages 
420=Incorrect command line 
421=The file is not a password-protected %PROG_EXTU%-archive or status file 
 
; Question after plaintext attack if we aren't got a password 
430=The password not found. Do you want to decrypt archive now? 
 
431=Mask length exceeds unregistered version limits 
 
; When user drag'n'dropped several files: 
432=%PROG_NAME% can accept only one file at once 
 
;--------------------------------------- 
; New messages added at Januany, 17 2000 
; (will be used in later versions) 
 
; Plain-text with binary (not a archive) file (also used msgs 371-372) 
440=Allow using binary file as a plain-text %PROG_EXTU% archive 
441=Enter data offset 
 
;--------------------------------------- 
; New messages added at March, 3 2000 
;--------------------------------------- 
450=Update 
451=Check for %PROG_NAME% updates in the Internet 
452=The program is going to connect to Elcom web site to get information\r\nabout the most recent version of %PROG_NAME%. Nothing will be sent to Elcom\r\n(even your current version number). Make sure that you're online, and\r\npress "OK"; or "Cancel" to decline. 
453=Please, wait 
454=Connecting to Elcom web site... 
455=Cannot retrieve current version info 
456=WININET.DLL is not installed 
457=Connection cancelled 
458=Cannot connect to website 
459=You have newest version of %PROG_NAME% 
460=Update is available, newest version is %s.\r\nYou can download it from %s. 
 
; New "About" dialog messages 
470=Product News: 
471=Frequently Asked Questions: 
472=Password Recovery Software: 
473=Send Feedback: 
474=Elcom Home Page: 
 
480=Help 
 
; Advanced plaintext configuration dialog messages 
; (This feature will be implemented in future versions of AZPR) 
490=Invoke advanced plaintext configuration dialog 
491=Advanced plaintext configuration 
492=Encrypted file 
493=Select encrypted file... 
494=Plaintext file 
495=Select plaintext file... 
496=Binary data 
497=Archive contents 
498=Data size: 
499=Data offset: 
500=Link matching files in archives 
501=Start from: 
502=Clear 'start from' field 
503='Start from' field contains invalid value.\r\nClear it and run the attack again. 
 
; next line starts from lowercase letter 'cause it used (or will be used) 
; in the middle of the phrase... 
510=version 
 
520=RSA key file not found 
521=RSA key file corrupted 
522=RSA key file invalid 
 
; new for 3.50 
530=Advanced 
531=Advanced options 
532=Use known start of the file for stored archives (hex) 
533=Always use WinZIP optimized attack engine if probability is greater then 
534=Known bytes: 
535=This archive has been created with WinZIP with a probability of %d%%.\r\nDo you want to use WinZIP optimized attack engine? 
536=The "known bytes" field is invalid. Please correct it and run the attack again\r\n(Bytes should follow one by one without empty fields, in a hex form). 
; status window messages 
537=Using known start of the file. 
538=Using winzip optimized attack engine. 
 
540=This archive has been created with %PROG_EXTU% version which is not supported by %PROG_NAME% (yet). 
541=Testing dictionary 
 
550=End at: 
551=Clear ending password 
552=Ending password length does not match maximum password length 
553=Invalid ending password, it does not match a selected range 
554=Mask does not match an ending password 
555=Cannot run the attack.\r\nStarting password greater then or equal to ending password. 
556=Attack stopped at password '%s'. 
; End of message file