www.pudn.com > LPC1768_SD_FAT_VCOM.zip > usbapi.h, change:2009-11-02,size:5245b


/* 
	LPCUSB, an USB device driver for LPC microcontrollers	 
	Copyright (C) 2006 Bertrik Sikken (bertrik@sikken.nl) 
 
	Redistribution and use in source and binary forms, with or without 
	modification, are permitted provided that the following conditions are met: 
 
	1. Redistributions of source code must retain the above copyright 
	   notice, this list of conditions and the following disclaimer. 
	2. Redistributions in binary form must reproduce the above copyright 
	   notice, this list of conditions and the following disclaimer in the 
	   documentation and/or other materials provided with the distribution. 
	3. The name of the author may not be used to endorse or promote products 
	   derived from this software without specific prior written permission. 
 
	THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 
	IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 
	OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 
	IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,  
	INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
	NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
	DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
	THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
	(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 
	THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
*/ 
 
/** 
	@file 
*/ 
 
// CodeRed - include the LPCUSB type.h file rather than NXP one directly 
#include "lpcusb_type.h" 
 
#include "usbstruct.h"		// for TSetupPacket 
 
/************************************************************************* 
	USB configuration 
**************************************************************************/ 
 
#define MAX_PACKET_SIZE0	64		/**< maximum packet size for EP 0 */ 
 
/************************************************************************* 
	USB hardware interface 
**************************************************************************/ 
 
// endpoint status sent through callback 
#define EP_STATUS_DATA		(1<<0)		/**< EP has data */ 
#define EP_STATUS_STALLED	(1<<1)		/**< EP is stalled */ 
#define EP_STATUS_SETUP		(1<<2)		/**< EP received setup packet */ 
#define EP_STATUS_ERROR		(1<<3)		/**< EP data was overwritten by setup packet */ 
#define EP_STATUS_NACKED	(1<<4)		/**< EP sent NAK */ 
 
// device status sent through callback 
#define DEV_STATUS_CONNECT		(1<<0)	/**< device just got connected */ 
#define DEV_STATUS_SUSPEND		(1<<2)	/**< device entered suspend state */ 
#define DEV_STATUS_RESET		(1<<4)	/**< device just got reset */ 
 
// interrupt bits for NACK events in USBHwNakIntEnable 
// (these bits conveniently coincide with the LPC176x USB controller bit) 
#define INACK_CI		(1<<1)			/**< interrupt on NACK for control in */ 
#define INACK_CO		(1<<2)			/**< interrupt on NACK for control out */ 
#define INACK_II		(1<<3)			/**< interrupt on NACK for interrupt in */ 
#define INACK_IO		(1<<4)			/**< interrupt on NACK for interrupt out */ 
#define INACK_BI		(1<<5)			/**< interrupt on NACK for bulk in */ 
#define INACK_BO		(1<<6)			/**< interrupt on NACK for bulk out */ 
 
BOOL USBHwInit			(void); 
void USBHwISR			(void); 
 
void USBHwNakIntEnable	(U8 bIntBits); 
 
void USBHwConnect		(BOOL fConnect); 
 
void USBHwSetAddress	(U8 bAddr); 
void USBHwConfigDevice	(BOOL fConfigured); 
 
// endpoint operations 
void USBHwEPConfig		(U8 bEP, U16 wMaxPacketSize); 
int  USBHwEPRead		(U8 bEP, U8 *pbBuf, int iMaxLen); 
int	 USBHwEPWrite		(U8 bEP, U8 *pbBuf, int iLen); 
void USBHwEPStall		(U8 bEP, BOOL fStall); 
U8   USBHwEPGetStatus	(U8 bEP); 
 
/** Endpoint interrupt handler callback */ 
typedef void (TFnEPIntHandler)	(U8 bEP, U8 bEPStatus); 
void USBHwRegisterEPIntHandler	(U8 bEP, TFnEPIntHandler *pfnHandler); 
 
/** Device status handler callback */ 
typedef void (TFnDevIntHandler)	(U8 bDevStatus); 
void USBHwRegisterDevIntHandler	(TFnDevIntHandler *pfnHandler); 
 
/** Frame event handler callback */ 
typedef void (TFnFrameHandler)(U16 wFrame); 
void USBHwRegisterFrameHandler(TFnFrameHandler *pfnHandler); 
 
 
/************************************************************************* 
	USB application interface 
**************************************************************************/ 
 
// initialise the complete stack, including HW 
BOOL USBInit(void); 
 
/** Request handler callback (standard, vendor, class) */ 
typedef BOOL (TFnHandleRequest)(TSetupPacket *pSetup, int *piLen, U8 **ppbData); 
void USBRegisterRequestHandler(int iType, TFnHandleRequest *pfnHandler, U8 *pbDataStore); 
void USBRegisterCustomReqHandler(TFnHandleRequest *pfnHandler); 
 
/** Descriptor handler callback */ 
typedef BOOL (TFnGetDescriptor)(U16 wTypeIndex, U16 wLangID, int *piLen, U8 **ppbData); 
 
/** Default standard request handler */ 
BOOL USBHandleStandardRequest(TSetupPacket *pSetup, int *piLen, U8 **ppbData); 
 
/** Default EP0 handler */ 
void USBHandleControlTransfer(U8 bEP, U8 bEPStat); 
 
/** Descriptor handling */ 
void USBRegisterDescriptors(const U8 *pabDescriptors); 
BOOL USBGetDescriptor(U16 wTypeIndex, U16 wLangID, int *piLen, U8 **ppbData);