www.pudn.com > lpc1768-SD_File.rar > Abstract.txt, change:2010-09-20,size:767b


This is an RL Flash File System file manipulation example. 
You can create, read, copy, delete files from the SD/MMC  
Flash Memory Card and format the card.  
 
Example functionality:                                                    
 - Clock Settings: 
   - XTAL   =  12 MHz 
   - PLL0   = 400 MHz 
   - CCLK   = 100 MHz 
 
   - USART1: 115200 baud, 8 data bits, no parity, 1 stop bit 
 
The SD_FILE program is a standalone application loaded into 
on-chip flash and available for one target: 
 
MCB1700:  Standalone application for Keil MCB1700 Board using 
          COM1 port as a communication interface. 
 
          Connect a serial cable to RS232 COM port using 
          HyperTerminal at 115200 baud, 8-bits, no parity, 
          1 stop bit, XON/XOFF.