www.pudn.com > GKC-DProteus.rar > MENU.h, change:2008-09-30,size:2708b


/******************************************************** 
*                                                       * 
*    File       : menu.h                                * 
*    Date       : 2006-11-5                             * 
*    Version    : 1.0                                   * 
*                                                       * 
********************************************************/ 
#define uchar unsigned char 
// ****************************************************** 
uchar code mainmenustr[4][16]={{"1:测试项目选择\0"}, 
                                {"2:断口状态检查\0"}, 
                                {"3:预置设定\0"}, 
                                {"4:打印报表\0"}}; 
uchar code submenustr1[4][16]={	{"1:合闸试验\0"}, 
                                {"2:分闸试验\0"}, 
                                {"3:重分合闸\0"}, 
                                {"4:返回上级\0"}}; 
uchar code submenustr2[4][16]={{" A1:     A2:\0"}, 
                                {" B1:     B2:\0"}, 
                                {" C1:     C2:\0"}, 
                                {"*按确认键退出*\0"}}; 
uchar code submenustr3[4][16]={{"1:时限设定\0"}, 
                                {"2:行程设定\0"}, 
                                {"3:打印方式\0"}, 
                                {"4:返回上级\0"}}; 
uchar code submenustr4[4][16]={{"1:数据列表\0"}, 
                                {"2:数据波形\0"}, 
                                {"3:列表及波形\0"}, 
                                {"4:返回上级\0 "}}; 
uchar code submenustr31[4][16]={{"本次测试将在\0"}, 
                                {"       秒\0  "}, 
                                {"  时限内完成\0"}, 
                                {"*按确认键退出*\0"}}; 
uchar code submenustr32[4][16]={{" 开关触头行程\0"}, 
                                {"       毫米\0"}, 
                                {"\0"}, 
                                {"*按确认键退出*\0"}}; 
uchar code     errorstr[4][16]={{"错误:\0 "}, 
                                 {"    开关拒动\0 "}, 
                                 {"  请检查接线!\0"}, 
							     {"*按确认键退出*\0"}}; 
uchar code   returnstr[16]={" 4:返回上级\0"}; 
uchar code    okkeystr[18]={"*按确认键退出*\0"}; 
uchar code updownkeystr[20]={"▼--翻页●--退出\0"}; 
uchar code warningstr1[16]={" ...TESTING...\0"}; 
uchar code warningstr2[16]={"  PLEASE WAIT\0 "}; 
uchar code zz[]= {0xFF,0xFF,0xFF,0xFF,0xC0,0x03,0xC7,0xC3, 
                  0xCF,0xE3,0xDC,0x03,0xD8,0xC3,0xD9,0xF3, 
                  0xD9,0xBB,0xD8,0x1B,0xCC,0x3B,0xCF,0xF3, 
                  0xC7,0xC3,0xC0,0x03,0xFF,0xFF,0xFF,0xFF}; 
//**********************************************************