www.pudn.com > hpbios.rar > ATORGS.EQU

;	[]===========================================================[] 
; 
;	NOTICE: THIS PROGRAM BELONGS TO AWARD SOFTWARE INTERNATIONAL(R) 
;	        INC. IT IS CONSIDERED A TRADE SECRET AND IS NOT TO BE 	 
;	        DIVULGED OR USED BY PARTIES WHO HAVE NOT RECEIVED	 
;	        WRITTEN AUTHORIZATION FROM THE OWNER. 
; 
; 	[]===========================================================[] 
; 
 
;---------------------------------------------------------------------------- 
;Rev	Date	 Name	Description 
;---------------------------------------------------------------------------- 
;R02	12/29/99 STV	Added a new device structure for Int13h access control 
;			easily. 
;R01	05/16/91 JJ     Initial version for 4.2 - from old ver. 2.2 
 
;[]-----------------------------------[] 
;					 
;   Award Software 386/486 BIOS		 
;      Equates for ATORGS.ASM 
;   Initial Revision 17-Apr-1990	 
;					 
;[]-----------------------------------[] 
 
 
; 
;	Equates for SETTINGS 
; 
 
K101_NUM_LOCK	EQU	00000001b		; 0 = num lock on 101 keyboard 
						;	1 = 101 key Num lock off on power up. 
						;	0 = 101 key Num lock on on power up. 
FAST_HDU_SEEK	EQU	00000010b		; 1 = Disallow fast HDU seek operations 
						;	1 = disallow fast seeks. 
						;	0 = allow fast seeks 
SPD_SW_DISABLE	EQU	00000100b		; 2 = Disallow speed switching in cmos 
						;	1 = disallow speed switch setting 
						;	0 = allow speed switch setting 
WAIT_METHOD	EQU	11000000b		; 6-7 = Waiting method 
						;	00 = short refresh clock method 
						;	01 = long refresh clock method 
						;	10 = dummy loop method 
 
 
; 
;	Equates for SPD_DEF 
; 
 
 
SPD_POL		EQU	00000001b		;0     = polarity of speed switch 
						; 	0 = low speed is active low 
						; 	1 = low speed is active high 
SPD_RESERVED	EQU	00001110b		;1-3   = Reserved 
SPD_SLOW_DEF	EQU	00110000b		;4-5   = slow speed definition 
						;	00 = Slowest 
						;	01 = Medium 
						;	10 = Fast 
						;	11 = Very Fast 
SPD_AT_BOOT	EQU	01000000b		;6     = speed for boot 
						;	0 = low speed 
						;	1 = high speed 
SPD_BEEP	EQU	10000000b		;7     = beep speaker on speed change 
						; 	1 = don't beep speaker 
						; 	0 = beep speaker 
 
MAX_SILENT_POST_CODE	EQU	127 
 
;R02 start 
Drive_Letter_Max	equ	26 
Drive_Letter_A		equ	offset DGROUP:Drive_Letter_Table 
Drive_Letter_B		equ	offset DGROUP:Drive_Letter_Table+1 
Drive_Letter_C		equ	offset DGROUP:Drive_Letter_Table+2 
Drive_Letter_Z		equ	offset DGROUP:Drive_Letter_Table+25 
;----- Bios Support Device type definition ----- 
None_Device		equ	0 
STD_FDD			equ	1 
SCSI_HDD		equ	2 
IDE_HDD			equ	3 
IDE_CDROM		equ	4 
IDE_LS120		equ	5 
IDE_ZIP_FDD		equ	6 
IDE_ZIP_HDD		equ	7 
USB_FDD			equ	8 
USB_HDD			equ	9 
USB_CDROM		equ	10 
USB_LS120		equ	11 
USB_ZIP_FDD		equ	12 
 
Bios_Support_Device	struc 
STD_FDD_NO		db	? 
SCSI_HDD_NO		db	? 
IDE_HDD_NO		db	? 
IDE_CDROM_NO		db	? 
IDE_LS120_NO		db	? 
IDE_ZIP_FDD_NO		db	? 
IDE_ZIP_HDD_NO		db	? 
USB_FDD_NO		db	? 
USB_HDD_NO		db	? 
USB_CDROM_NO		db	? 
USB_LS120_NO		db	? 
USB_ZIP_FDD_NO		db	? 
Bios_Support_Device	ends 
;R02 end