www.pudn.com > rtu.rar > A
File PRO\TSYSTEM.C:
while(!feof(fp) && (i= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File C\TCDDR13.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File C\SET.C:
while(YX_Name_Dbase[i]<768) YX_Name_Dbase[i]=YX_Name_Dbase[i]+128;
while((*(KWH_Name_Dbase[i])).KWHNum<1343)(*(KWH_Name_Dbase[i])).KWHNum=(*(KWH_Name_Dbase[i])).KWHNum+224;
while((*(YK_RT_Dbase[i])).YKNodeID<96) (*(YK_RT_Dbase[i+LineNum])).YKNodeID=(*(YK_RT_Dbase[i])).YKNodeID+16;
File SOFTS\TPUBLIC.C:
}while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
File SOFTS\TSYSTEM.C:
while(1)
{//------------while---------------------------------------
};//------------while---------------------------------------
while(1)
File SOFTS\BGIDEMO.C:
while( ch < 256 ){ /* For each possible character */
while( ch < 256 ){ /* For each printable character */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( (AspectRatio*radius) < piesize ) ++radius;
while ( !kbhit() ) {
while( x < vp.right-2 ){ /* Draw lines across the screen */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
File SOFTS\IEC101.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File SOFTS\TCDDR13.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File SOFTS\TINTER.C:
while(int_no!=0)
File SOFTS\SET.C:
while(YX_Name_Dbase[i]<768) YX_Name_Dbase[i]=YX_Name_Dbase[i]+128;
while((*(KWH_Name_Dbase[i])).KWHNum<1343)(*(KWH_Name_Dbase[i])).KWHNum=(*(KWH_Name_Dbase[i])).KWHNum+224;
while((*(YK_RT_Dbase[i])).YKNodeID<96) (*(YK_RT_Dbase[i+LineNum])).YKNodeID=(*(YK_RT_Dbase[i])).YKNodeID+16;
File SOFTS\Y12.C:
while((TaskStatus(y12->Tasknum) & 0x02)!=0) //要求处理接收的数据
}//while
File BAP\TPUBLIC.C:
}while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
File BAP\TSYSTEM.C:
while(1)
{//------------while---------------------------------------
};//------------while---------------------------------------
while(1)
File BAP\BGIDEMO.C:
while( ch < 256 ){ /* For each possible character */
while( ch < 256 ){ /* For each printable character */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( (AspectRatio*radius) < piesize ) ++radius;
while ( !kbhit() ) {
while( x < vp.right-2 ){ /* Draw lines across the screen */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
File BAP\IEC101.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File BAP\TCDDR13.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File BAP\TINTER.C:
while(int_no!=0)
File BAP\FDK.C:
while (--count >= 0) {
while (--Length >= 0)
File BAP\SET.C:
while(YX_Name_Dbase[i]<768) YX_Name_Dbase[i]=YX_Name_Dbase[i]+128;
while((*(KWH_Name_Dbase[i])).KWHNum<1343)(*(KWH_Name_Dbase[i])).KWHNum=(*(KWH_Name_Dbase[i])).KWHNum+224;
while((*(YK_RT_Dbase[i])).YKNodeID<96) (*(YK_RT_Dbase[i+LineNum])).YKNodeID=(*(YK_RT_Dbase[i])).YKNodeID+16;
File BAP\Y12.C:
while((TaskStatus(y12->Tasknum) & 0x02)!=0) //要求处理接收的数据
}//while
File 0410\TPUBLIC.C:
}while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
File 0410\TSYSTEM.C:
while(1)
{//------------while---------------------------------------
};//------------while---------------------------------------
while(1)
File 0410\BGIDEMO.C:
while( ch < 256 ){ /* For each possible character */
while( ch < 256 ){ /* For each printable character */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( (AspectRatio*radius) < piesize ) ++radius;
while ( !kbhit() ) {
while( x < vp.right-2 ){ /* Draw lines across the screen */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
File 0410\IEC101.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File 0410\TCDDR13.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File 0410\TINTER.C:
while(int_no!=0)
File 0410\SET.C:
while(YX_Name_Dbase[i]<768) YX_Name_Dbase[i]=YX_Name_Dbase[i]+128;
while((*(KWH_Name_Dbase[i])).KWHNum<1343)(*(KWH_Name_Dbase[i])).KWHNum=(*(KWH_Name_Dbase[i])).KWHNum+224;
while((*(YK_RT_Dbase[i])).YKNodeID<96) (*(YK_RT_Dbase[i+LineNum])).YKNodeID=(*(YK_RT_Dbase[i])).YKNodeID+16;
File 0410\Y12.C:
while((TaskStatus(y12->Tasknum) & 0x02)!=0) //要求处理接收的数据
}//while
File 0423\TPUBLIC.C:
}while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
File 0423\TSYSTEM.C:
while(1)
{//------------while---------------------------------------
};//------------while---------------------------------------
while(1)
File 0423\BGIDEMO.C:
while( ch < 256 ){ /* For each possible character */
while( ch < 256 ){ /* For each printable character */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( (AspectRatio*radius) < piesize ) ++radius;
while ( !kbhit() ) {
while( x < vp.right-2 ){ /* Draw lines across the screen */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
File 0423\IEC101.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File 0423\TCDDR13.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File 0423\TINTER.C:
while(int_no!=0)
File 0423\SET.C:
while(YX_Name_Dbase[i]<768) YX_Name_Dbase[i]=YX_Name_Dbase[i]+128;
while((*(KWH_Name_Dbase[i])).KWHNum<1343)(*(KWH_Name_Dbase[i])).KWHNum=(*(KWH_Name_Dbase[i])).KWHNum+224;
while((*(YK_RT_Dbase[i])).YKNodeID<96) (*(YK_RT_Dbase[i+LineNum])).YKNodeID=(*(YK_RT_Dbase[i])).YKNodeID+16;
File 0423\Y12.C:
while((TaskStatus(y12->Tasknum) & 0x02)!=0) //要求处理接收的数据
}//while
File 0405\TPUBLIC.C:
}while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
File 0405\TSYSTEM.C:
while(1)
{//------------while---------------------------------------
};//------------while---------------------------------------
while(1)
File 0405\BGIDEMO.C:
while( ch < 256 ){ /* For each possible character */
while( ch < 256 ){ /* For each printable character */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( (AspectRatio*radius) < piesize ) ++radius;
while ( !kbhit() ) {
while( x < vp.right-2 ){ /* Draw lines across the screen */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
File 0405\IEC101.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File 0405\TCDDR13.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File 0405\TINTER.C:
while(int_no!=0)
File 0405\SET.C:
while(YX_Name_Dbase[i]<768) YX_Name_Dbase[i]=YX_Name_Dbase[i]+128;
while((*(KWH_Name_Dbase[i])).KWHNum<1343)(*(KWH_Name_Dbase[i])).KWHNum=(*(KWH_Name_Dbase[i])).KWHNum+224;
while((*(YK_RT_Dbase[i])).YKNodeID<96) (*(YK_RT_Dbase[i+LineNum])).YKNodeID=(*(YK_RT_Dbase[i])).YKNodeID+16;
File 0405\Y12.C:
while((TaskStatus(y12->Tasknum) & 0x02)!=0) //要求处理接收的数据
}//while
File SOFTSAM\TPUBLIC.C:
}while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
File SOFTSAM\TSYSTEM.C:
while(1)
{//------------while---------------------------------------
};//------------while---------------------------------------
while(1)
File SOFTSAM\BGIDEMO.C:
while( ch < 256 ){ /* For each possible character */
while( ch < 256 ){ /* For each printable character */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( (AspectRatio*radius) < piesize ) ++radius;
while ( !kbhit() ) {
while( x < vp.right-2 ){ /* Draw lines across the screen */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
File SOFTSAM\IEC101.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File SOFTSAM\TCDDR13.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File SOFTSAM\TINTER.C:
while(int_no!=0)
File SOFTSAM\SET.C:
while(YX_Name_Dbase[i]<768) YX_Name_Dbase[i]=YX_Name_Dbase[i]+128;
while((*(KWH_Name_Dbase[i])).KWHNum<1343)(*(KWH_Name_Dbase[i])).KWHNum=(*(KWH_Name_Dbase[i])).KWHNum+224;
while((*(YK_RT_Dbase[i])).YKNodeID<96) (*(YK_RT_Dbase[i+LineNum])).YKNodeID=(*(YK_RT_Dbase[i])).YKNodeID+16;
File SOFTSAM\Y12.C:
while((TaskStatus(y12->Tasknum) & 0x02)!=0) //要求处理接收的数据
}//while
File PTSMODE\TPUBLIC.C:
}while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
File PTSMODE\TSYSTEM.C:
while(1)
{//------------while---------------------------------------
};//------------while---------------------------------------
while(1)
File PTSMODE\BGIDEMO.C:
while( ch < 256 ){ /* For each possible character */
while( ch < 256 ){ /* For each printable character */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( (AspectRatio*radius) < piesize ) ++radius;
while ( !kbhit() ) {
while( x < vp.right-2 ){ /* Draw lines across the screen */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
File PTSMODE\IEC101.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File PTSMODE\TCDDR13.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File PTSMODE\TINTER.C:
while(int_no!=0)
File PTSMODE\SET.C:
while(YX_Name_Dbase[i]<768) YX_Name_Dbase[i]=YX_Name_Dbase[i]+128;
while((*(KWH_Name_Dbase[i])).KWHNum<1343)(*(KWH_Name_Dbase[i])).KWHNum=(*(KWH_Name_Dbase[i])).KWHNum+224;
while((*(YK_RT_Dbase[i])).YKNodeID<96) (*(YK_RT_Dbase[i+LineNum])).YKNodeID=(*(YK_RT_Dbase[i])).YKNodeID+16;
File PTSMODE\Y12.C:
while((TaskStatus(y12->Tasknum) & 0x02)!=0) //要求处理接收的数据
}//while
File TPUBLIC.C:
}while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
} while((done == FALSE) && (err == FALSE));
File TSYSTEM.C:
while(1)
{//------------while---------------------------------------
};//------------while---------------------------------------
while(1)
File BGIDEMO.C:
while( ch < 256 ){ /* For each possible character */
while( ch < 256 ){ /* For each printable character */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
while( (AspectRatio*radius) < piesize ) ++radius;
while ( !kbhit() ) {
while( x < vp.right-2 ){ /* Draw lines across the screen */
while( !kbhit() ){ /* Until user enters a key... */
while( !kbhit() ){ /* Repeat until a key is hit */
} /* End of WHILE not KBHIT */
File IEC101.C:
while (--count >= 0)
while(--Length >= 0)
while(!feof(fp) && (i= 0)
File TINTER.C:
while(int_no!=0)
File FDK.C:
while (--count >= 0) {
while (--Length >= 0)
File Y12.C:
while((TaskStatus(y12->Tasknum) & 0x02)!=0) //要求处理接收的数据
}//while