www.pudn.com > ucosii_demo.rar > jccoefct.c, change:2007-06-15,size:8162b
/*
* jccoefct.c
*
* Copyright (C) 1994-1997, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains the coefficient buffer controller for compression.
* This controller is the top level of the JPEG compressor proper.
* The coefficient buffer lies between forward-DCT and entropy encoding steps.
*/
#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"
/* We use a full-image coefficient buffer when doing Huffman optimization,
* and also for writing multiple-scan JPEG files. In all cases, the DCT
* step is run during the first pass, and subsequent passes need only read
* the buffered coefficients.
*/
#ifdef ENTROPY_OPT_SUPPORTED
#define FULL_COEF_BUFFER_SUPPORTED
#else
#ifdef C_MULTISCAN_FILES_SUPPORTED
#define FULL_COEF_BUFFER_SUPPORTED
#endif
#endif
/* Private buffer controller object */
typedef struct {
struct jpeg_c_coef_controller pub; /* public fields */
JDIMENSION iMCU_row_num; /* iMCU row # within image */
JDIMENSION mcu_ctr; /* counts MCUs processed in current row */
int MCU_vert_offset; /* counts MCU rows within iMCU row */
int MCU_rows_per_iMCU_row; /* number of such rows needed */
/* For single-pass compression, it's sufficient to buffer just one MCU
* (although this may prove a bit slow in practice). We allocate a
* workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each
* MCU constructed and sent. (On 80x86, the workspace is FAR even though
* it's not really very big; this is to keep the module interfaces unchanged
* when a large coefficient buffer is necessary.)
* In multi-pass modes, this array points to the current MCU's blocks
* within the virtual arrays.
*/
JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU];
/* In multi-pass modes, we need a virtual block array for each component. */
jvirt_barray_ptr whole_image[MAX_COMPONENTS];
} my_coef_controller;
typedef my_coef_controller * my_coef_ptr;
/* Forward declarations */
METHODDEF(boolean) compress_data
JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
LOCAL(void)
start_iMCU_row (j_compress_ptr cinfo)
/* Reset within-iMCU-row counters for a new row */
{
my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
/* In an interleaved scan, an MCU row is the same as an iMCU row.
* In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
* But at the bottom of the image, process only what's left.
*/
if (cinfo->comps_in_scan > 1) {
coef->MCU_rows_per_iMCU_row = 1;
} else {
if (coef->iMCU_row_num (cinfo->total_iMCU_rows-1))
coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor;
else
coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height;
}
coef->mcu_ctr = 0;
coef->MCU_vert_offset = 0;
}
/*
* Initialize for a processing pass.
*/
METHODDEF(void)
start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
{
my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
coef->iMCU_row_num = 0;
start_iMCU_row(cinfo);
switch (pass_mode) {
case JBUF_PASS_THRU:
if (coef->whole_image[0] != NULL)
ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
coef->pub.compress_data = compress_data;
break;
default:
ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
break;
}
}
/*
* Process some data in the single-pass case.
* We process the equivalent of one fully interleaved MCU row ("iMCU" row)
* per call, ie, v_samp_factor block rows for each component in the image.
* Returns TRUE if the iMCU row is completed, FALSE if suspended.
*
* NB: input_buf contains a plane for each component in image,
* which we index according to the component's SOF position.
*/
METHODDEF(boolean)
compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
{
my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
JDIMENSION MCU_col_num; /* index of current MCU within row */
JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
int blkn, bi, ci, yindex, yoffset, blockcnt;
JDIMENSION ypos, xpos;
jpeg_component_info *compptr;
/* Loop to write as much as one whole iMCU row */
for (yoffset = coef->MCU_vert_offset; yoffset coef->MCU_rows_per_iMCU_row;
yoffset++) {
for (MCU_col_num = coef->mcu_ctr; MCU_col_num = last_MCU_col;
MCU_col_num++) {
/* Determine where data comes from in input_buf and do the DCT thing.
* Each call on forward_DCT processes a horizontal row of DCT blocks
* as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks
* sequentially. Dummy blocks at the right or bottom edge are filled in
* specially. The data in them does not matter for image reconstruction,
* so we fill them with values that will encode to the smallest amount of
* data, viz: all zeroes in the AC entries, DC entries equal to previous
* block's DC value. (Thanks to Thomas Kinsman for this idea.)
*/
blkn = 0;
for (ci = 0; ci cinfo->comps_in_scan; ci++) {
compptr = cinfo->cur_comp_info[ci];
blockcnt = (MCU_col_num last_MCU_col) ? compptr->MCU_width
: compptr->last_col_width;
xpos = MCU_col_num * compptr->MCU_sample_width;
ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */
for (yindex = 0; yindex compptr->MCU_height; yindex++) {
if (coef->iMCU_row_num last_iMCU_row ||
yoffset+yindex compptr->last_row_height) {
(*cinfo->fdct->forward_DCT) (cinfo, compptr,
input_buf[compptr->component_index],
coef->MCU_buffer[blkn],
ypos, xpos, (JDIMENSION) blockcnt);
if (blockcnt compptr->MCU_width) {
/* Create some dummy blocks at the right edge of the image. */
jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt],
(compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK));
for (bi = blockcnt; bi compptr->MCU_width; bi++) {
coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0];
}
}
} else {
/* Create a row of dummy blocks at the bottom of the image. */
jzero_far((void FAR *) coef->MCU_buffer[blkn],
compptr->MCU_width * SIZEOF(JBLOCK));
for (bi = 0; bi compptr->MCU_width; bi++) {
coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0];
}
}
blkn += compptr->MCU_width;
ypos += DCTSIZE;
}
}
/* Try to write the MCU. In event of a suspension failure, we will
* re-DCT the MCU on restart (a bit inefficient, could be fixed...)
*/
if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) {
/* Suspension forced; update state counters and exit */
coef->MCU_vert_offset = yoffset;
coef->mcu_ctr = MCU_col_num;
return FALSE;
}
}
/* Completed an MCU row, but perhaps not an iMCU row */
coef->mcu_ctr = 0;
}
/* Completed the iMCU row, advance counters for next one */
coef->iMCU_row_num++;
start_iMCU_row(cinfo);
return TRUE;
}
/*
* Initialize coefficient buffer controller.
*/
GLOBAL(void)
jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer)
{
my_coef_ptr coef;
coef = (my_coef_ptr)
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
SIZEOF(my_coef_controller));
cinfo->coef = (struct jpeg_c_coef_controller *) coef;
coef->pub.start_pass = start_pass_coef;
/* Create the coefficient buffer. */
if (need_full_buffer) {
ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
} else {
/* We only need a single-MCU buffer. */
JBLOCKROW buffer;
int i;
buffer = (JBLOCKROW)
(*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
for (i = 0; i C_MAX_BLOCKS_IN_MCU; i++) {
coef->MCU_buffer[i] = buffer + i;
}
coef->whole_image[0] = NULL; /* flag for no virtual arrays */
}
}