www.pudn.com > H265+_C64X_2008.8.rar > _TVP5150.h

 
/* 
/////////////////////////////////////////////////////////////////////////////// 
//                                                                           // 
//   Copyright (C) 2006-2008  Beijing,  pengzhen  (pengzhenxp@yahoo.com.cn)  // 
//                                                                           // 
/////////////////////////////////////////////////////////////////////////////// 
*/ 
 
#ifndef __TVP5150_H 
#define __TVP5150_H 
 
#ifdef __cplusplus 
extern "C" { 
#endif 
 
#include  
 
#define _TVP5150_IIC_ADDR0 (0xba>>1)  
#define _TVP5150_IIC_ADDR1 (0xb8>>1)  
 
// adjusted for 5150 by ralf 
typedef enum  
{ 
   
    /* front end part */ 
    AnalogInputControl1   = 0x00,    /* 0x01=S-video 0x00/0x02=Composite */ 
    AnalogChannelControls = 0x01,    /*0x15=Automatic offset control */ 
    OperationModeControls = 0x02,    /*0x00 = Automatic mode determined */ 
    MiscellaneousControls = 0x03,    /*0x29 = YCbCr output enable */ 
	                                 /*0x2d=HSYNC, VSYNC/PALI, active video indicator (AVID), and FID/GLCO output enables:*/ 
	AutoSwitchMask=			0x04, 
	SoftwareReset=			0x05, /*0x01 = Reset device*/ 
     
	/* decoder part */ 
    ColorKillercontrol=		0x06, 
	LuminanceControl1=      0x07, /*0x70=Luminance bypass enabled during vertical blanking*/   
     
	LuminanceControl=		0x08, /*0x40=Luminance chroma trap filter enabled*/   
	LuminanceBrightness=	0x09, /*0x00=dark 0xff=bright*/   
	ChromaSaturation=       0x0A, /*0x00=nocolor 0xff=maximum*/  
	ChromaHueControl=       0x0B, /*0x80=-180 degrees 0x7f=+180 degrees*/  
	LuminanceContrast=      0x0C, /*0x00=minimum_contrast 0xff=maximum_contrast*/  
	 
	OutputsRateSelect=		0x0D, //AIPortFormat 
	LuminanceControl3=		0x0E, 
	ConfigSharedPin=		0x0F, /*0x0a = FID/GLCO (pin 23) function select GLCO VSYNC*/ 
	                              /*0x0f = VSYNC/PALI (pin 24) function select GLCO PALI*/ 
 
 
    ActiveVideoStartMSB=	0x11, 
	ActiveVideoStartLSB=	0x12, 
	ActiveVideoStopMSB=		0x13, 
	ActiveVideoStopLSB=		0x14, 
 
	Genlock_RTC=			0x15, //0x25 = ITU-R BT.656 RTC output mode 1 
	                              //0x21 = ITU-R BT.656 RTC output mode 0 
    HorzSyncStart=          0x16, 
 
	VerticalBlankStart=		0x18,    
    VerticalBlankStop=		0x19, 
 
    ChrominanceControl1=	0x1A, /*0x0c Color PLL not reset(Chrominance comb filter enable)*/ 
	                              /*0x1c Color PLL reset(Automatic color gain control)*/ 
	ChrominanceControl2=	0x1B, 
 
    InterruptResetB =0x1C,/*0x01=Reset TV/VCR changed bit 0x00=No effect*/   
	InterruptEnableB=0x1D,/*0x01=TV/VCR changed Enabled 0x00=Disabled*/  
	InterruptConfigurationB=0x1D,/*0x01= Interrupt B is active high. 0x00=low*/     
 
    VideoStandard=			0x28,/*0x02 =NTSC 0x04 =PAL 0x0a =SECAM*/ 
 
	InterruptResetA =       0xC0,/*0x01=Reset TV/VCR changed bit 0x00=No effect*/   
	InterruptEnableA=       0xC1,/*0x01=TV/VCR changed Enabled 0x00=Disabled*/  
	InterruptConfigurationA=0xC2,/*0x01= Interrupt B is active high. 0x00=low*/     
 
	InterruptStatusB=0x86, 
	InterruptActiveB=0x87, 
	 
	Status1=		 0x88, 
	Status2=		 0x89, 
	Status3=		 0x8a, 
	Status4=		 0x8b, 
	Status5=		 0x8c, 
 
	//ScalerStatus=           0x8F, 
 
	//VDPStatus = 0xC6, 
	LineMode  =	0xD0 
 
} decoderRegs_t; 
 
#ifdef __cplusplus 
} 
#endif 
 
 
#endif /*#ifndef __TVP5150_H*/ 
 
/********************************************************************************/ 
/* end of file */ 
/********************************************************************************/