www.pudn.com > ADC.rar > Project.prm

/* This is a linker parameter file for the QG8 */ 
 
NAMES END /* CodeWarrior will pass all the needed files to the linker by command line. But here you may add your own files too. */ 
 
SEGMENTS /* Here all RAM/ROM areas of the device are listed. Used in PLACEMENT below. */ 
    ROM                      =  READ_ONLY    0xE000 TO 0xFFAD; 
    Z_RAM                    =  READ_WRITE   0x0060 TO 0x00FF; 
    RAM                      =  READ_WRITE   0x0100 TO 0x025F; 
    ROM1                     =  READ_ONLY    0xFFC0 TO 0xFFCF; 
END 
 
PLACEMENT /* Here all predefined and user segments are placed into the SEGMENTS defined above. */ 
    DEFAULT_RAM                         INTO  RAM; 
    DEFAULT_ROM, ROM_VAR, STRINGS       INTO  ROM; /* ROM1 In case you want to use ROM1 as well, be sure the option -OnB=b is passed to the compiler. */ 
    _DATA_ZEROPAGE, MY_ZEROPAGE         INTO  Z_RAM; 
END 
 
 
STACKSIZE 0x50 
 
VECTOR 0 _Startup /* Reset vector: this is the default entry point for an application. */