www.pudn.com > FreeRTOSV4.4.0.zip > pio.h
//*---------------------------------------------------------------------------
//* ATMEL Microcontroller Software Support - ROUSSET -
//*---------------------------------------------------------------------------
//* The software is delivered "AS IS" without warranty or condition of any
//* kind, either express, implied or statutory. This includes without
//* limitation any warranty or condition with respect to merchantability or
//* fitness for any particular purpose, or against the infringements of
//* intellectual property rights of others.
//*-----------------------------------------------------------------------------
//* File Name : pio.h
//* Object : Parallel I/O Definition File
//* Translator : ARM Software Development Toolkit V2.11a
//*
//* 1.0 20/10/97 JCZ : Creation
//* 2.0 21/10/98 JCZ : Clean up
//*---------------------------------------------------------------------------
#ifndef pio_h
#define pio_h
/*---------------------------------------------*/
/* Parallel I/O Interface Structure Definition */
/*---------------------------------------------*/
typedef struct
{
at91_reg PIO_PER ; /* PIO Enable Register */
at91_reg PIO_PDR ; /* PIO Disable Register */
at91_reg PIO_PSR ; /* PIO Status Register */
at91_reg Reserved0 ;
at91_reg PIO_OER ; /* Output Enable Register */
at91_reg PIO_ODR ; /* Output Disable Register */
at91_reg PIO_OSR ; /* Output Status Register */
at91_reg Reserved1 ;
at91_reg PIO_IFER ; /* Input Filter Enable Register */
at91_reg PIO_IFDR ; /* Input Filter Disable Register */
at91_reg PIO_IFSR ; /* Input Filter Status Register */
at91_reg Reserved2 ;
at91_reg PIO_SODR ; /* Set Output Data Register */
at91_reg PIO_CODR ; /* Clear Output Data Register */
at91_reg PIO_ODSR ; /* Output Data Status Register */
at91_reg PIO_PDSR ; /* Pin Data Status Register */
at91_reg PIO_IER ; /* Interrupt Enable Register */
at91_reg PIO_IDR ; /* Interrupt Disable Register */
at91_reg PIO_IMR ; /* Interrupt Mask Register */
at91_reg PIO_ISR ; /* Interrupt Status Register */
} StructPIO ;
/*-----------------------------*/
/* PIO Handler type definition */
/*-----------------------------*/
//typedef void (*TypePIOHandler) ( StructPIO *pio_pt, u_int pio_mask ) ;
/*--------------------------------*/
/* Device Dependancies Definition */
/*--------------------------------*/
/* Number of PIO Controller */
#define NB_PIO_CTRL 1
/* Base Address */
#define PIO_BASE ((StructPIO *) 0xFFFF0000 )
/* Number of PIO Lines */
#define NB_PIO 32
/* Parallel I/O Bits Definition */
#define P0 (1<<0)
#define P1 (1<<1)
#define P2 (1<<2)
#define P3 (1<<3)
#define P4 (1<<4)
#define P5 (1<<5)
#define P6 (1<<6)
#define P7 (1<<7)
#define P8 (1<<8)
#define P9 (1<<9)
#define P10 (1<<10)
#define P11 (1<<11)
#define P12 (1<<12)
#define P13 (1<<13)
#define P14 (1<<14)
#define P15 (1<<15)
#define P16 (1<<16)
#define P17 (1<<17)
#define P18 (1<<18)
#define P19 (1<<19)
#define P20 (1<<20)
#define P21 (1<<21)
#define P22 (1<<22)
#define P23 (1<<23)
#define P24 (1<<24)
#define P25 (1<<25)
#define P26 (1<<26)
#define P27 (1<<27)
#define P28 (1<<28)
#define P29 (1<<29)
#define P30 (1<<30)
#define P31 (1<<31)
/* PIO Multiplexing Definition */
/* There is only one PIO Controller */
#define PIO_CTRL 0
#define PIO_TC0 PIO_CTRL
#define TCLK0 P0
#define TIOA0 P1
#define TIOB0 P2
#define PIN_TC0 (TIOA0|TIOB0|TCLK0)
#define PIO_TC1 PIO_CTRL
#define TCLK1 P3
#define TIOA1 P4
#define TIOB1 P5
#define PIN_TC1 (TIOA1|TIOB1|TCLK1)
#define PIO_TC2 PIO_CTRL
#define TCLK2 P6
#define TIOA2 P7
#define TIOB2 P8
#define PIN_TC2 (TIOA2|TIOB2|TCLK2)
#define PIO_EXT_IRQ PIO_CTRL
#define PIN_IRQ0 P9
#define PIN_IRQ1 P10
#define PIN_IRQ2 P11
#define PIN_FIQ P12
#define PIO_USART0 PIO_CTRL
#define SCK0 P13
#define TXD0 P14
#define RXD0 P15
#define PIN_USART0 (SCK0|TXD0|RXD0)
#define PIO_USART1 PIO_CTRL
#define SCK1 P20
#define TXD1 P21
#define RXD1 P22
#define PIN_USART1 (SCK1|TXD1|RXD1)
#define MCKO P25
#define CS2 P26
#define CS3 P27
#define CS4 P31
#define CS5 P30
#define CS6 P29
#define CS7 P28
#endif /* pio_h */