www.pudn.com > system.rar > main.c

/****************************************************************************/ 
/*                                                                          */ 
/*  Name        main.c                                                      */ 
/*                                                                          */ 
/*  Function    this file contains Application_Initialize function          */ 
/*              called by Nucleus environment                               */ 
/*  Version		0.1                                                         */ 
/*                                                                          */ 
/* 	Date       	Modification                                                */ 
/*  ------------------------------------                                    */ 
/*  18 June 2001		Create                                              */ 
/*                                                                          */ 
/*	Author		Laurent Sollier                                             */ 
/*                                                                          */ 
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ 
/****************************************************************************/ 
 
 
/*==== INCLUDES ===================================================*/ 
#include "l1sw.cfg"   /* OP_L1_STANDALONE definition */ 
#if (OP_L1_STANDALONE == 0) 
  #include "rv.cfg" 
  #include "debug.cfg" 
#endif 
#include "board.cfg" 
 
#include "l1_confg.h" 
#if (OP_L1_STANDALONE == 1) 
  #include "uart/uart.h" 
#endif 
/*==== FUNCTIONS ==================================================*/ 
 
#if (PSP_STANDALONE == 0) 
	#if (OP_L1_STANDALONE == 1) 
  		extern void Initialize_L1_stand_alone (void *first_available_memory); 
	#else 
  		extern void Cust_Init_Layer1(void); 
  		extern void StartFrame(void); 
	#endif 
#endif /* PSP_STANDALONE == 0 */ 
 
#if (CODE_VERSION != SIMULATION) 
  extern void Init_Target(void); 
  extern void Init_Unmask_IT(void); 
  extern void Init_Drivers(void); 
#endif 
 
#if (PSP_STANDALONE == 0) 
	extern void Init_Serial_Flows (void); 
#endif 
 
#if (OP_L1_STANDALONE == 0) 
  #if WCP_PROF == 1 
  extern void prf_Init(void); 
  #endif 
#endif 
 
/* 
 * Application_Initialize 
 * 
 * Initialization Main function, called by Nucleus (INC_Initialize) 
 */ 
 
//extern void bios_gpio_irqmode(unsigned long  gpio); 
void Application_Initialize (void *first_available_memory) 
{ 
 
#if (CODE_VERSION != SIMULATION) 
 
  /* 
   * Low-level HW Initialization. 
   */ 
  Init_Target (); 
 
  /* 
   * Drivers Initialization. 
   */ 
  Init_Drivers (); 
 
#endif /*   (CODE_VERSION != SIMULATION) */ 
 
#if (PSP_STANDALONE == 0) 
	#if (OP_L1_STANDALONE == 0) 
 
  	  	#if (_GSM==1) 
   
	  	/* 
   	   	* Layer1 SW Initialization. 
   	   	*/ 
	  	Cust_Init_Layer1 (); 
 
  	  	/* 
   	   	* SerialSwitch & Serial Flows Initialization. 
       	* WARNING!!! Must always be done after Layer1 Initialization 
   	   	*/ 
	  	Init_Serial_Flows (); 
   
  	  	#endif // _GSM 
 
	#else 
  		Init_Serial_Flows (); 
 
	  	Initialize_L1_stand_alone (first_available_memory); 
	#endif   /* (OP_L1_STANDALONE == 0) */ 
 
 
	#if (OP_L1_STANDALONE == 0) 
 
  		#if (_GSM==1) 
  		/* 
   		* Condat G2-3 SW Initialization including Frame. 
   		*/ 
   		Init_Unmask_KeyIT();	//lifanc for power on  
  		StartFrame (); 
  		#endif // _GSM 
 
	   	#if (TEST==1) && (_GSM==0) 
  		/* 
	    * The Watchdog is used as a General Purpose Timer for the Nucleus Ticks when 
	    * The Layer1 is not started => Test without GSM/GPRS. 
	    */ 
	   	Init_Watchdog_Timer ();  
	   	#endif 
 
  	 	#if WCP_PROF == 1 
  		/* 
   		* WCP Performance Profiler, Ver.2. 
   		* 
  	 	* WARNING!!! Must always be done after StartFrame() because 
   		* profiler uses Frame services! 
   		*/ 
  		prf_Init(); 
  		#endif 
 
	#endif   /* (OP_L1_STANDALONE == 0) */ 
#else 
	/* 
   	* SerialSwitch & Serial Flows Initialization. 
    * WARNING!!! Must always be done after Layer1 Initialization 
   	*/ 
	  	Init_Serial_Flows (); 
	/* 
	* The Watchdog is used as a General Purpose Timer for the Nucleus Ticks when 
	* The Layer1 is not started => Test without GSM/GPRS. 
	*/ 
	Init_Watchdog_Timer ();  
#endif 
 
#if (CODE_VERSION != SIMULATION) 
 
  /* 
   * Unmask used Interrupts. 
   */ 
#if (REMU==1) 
  rv_start(); 
#endif 
  Init_Unmask_IT (); 
 
//Create_Timer_Interrupt(); 
 
#endif   /* (CODE_VERSION != SIMULATION) */ 
/* 
#if( LEN_PDT_ID==2) 
bios_gpio_irqmode(26);  
#endif 
*/ 
}