www.pudn.com > interupt.rar > interupt.pin
-- Copyright (C) 1991-2007 Altera Corporation -- Your use of Altera Corporation's design tools, logic functions -- and other software and tools, and its AMPP partner logic -- functions, and any output files from any of the foregoing -- (including device programming or simulation files), and any -- associated documentation or information are expressly subject -- to the terms and conditions of the Altera Program License -- Subscription Agreement, Altera MegaCore Function License -- Agreement, or other applicable license agreement, including, -- without limitation, that your use is for the sole purpose of -- programming logic devices manufactured by Altera and sold by -- Altera or its authorized distributors. Please refer to the -- applicable agreement for further details. -- -- This is a Quartus II output file. It is for reporting purposes only, and is -- not intended for use as a Quartus II input file. This file cannot be used -- to make Quartus II pin assignments - for instructions on how to make pin -- assignments, please see Quartus II help. --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- -- NC : No Connect. This pin has no internal connection to the device. -- DNU : Do Not Use. This pin MUST NOT be connected. -- VCCPGM : Dedicated power pin for configuration, which MUST be connected to 1.8V, 2.5V or 3.0V depending on the needs of the configuration device. -- VCCINT : Dedicated power pin, which MUST be connected to VCC (1.5V). -- VCCIO : Dedicated power pin, which MUST be connected to VCC -- of its bank. -- Bank 1: 3.3V -- Bank 2: 3.3V -- Bank 3: 3.3V -- Bank 4: 3.3V -- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND. -- It can also be used to report unused dedicated pins. The connection -- on the board for unused dedicated pins depends on whether this will -- be used in a future design. One example is device migration. When -- using device migration, refer to the device pin-tables. If it is a -- GND pin in the pin table or if it will not be used in a future design -- for another purpose the it MUST be connected to GND. If it is an unused -- dedicated pin, then it can be connected to a valid signal on the board -- (low, high, or toggling) if that signal is required for a different -- revision of the design. -- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins. -- This pin should be connected to GND. It may also be connected to a -- valid signal on the board (low, high, or toggling) if that signal -- is required for a different revision of the design. -- GND* : Unused I/O pin. For transceiver I/O banks (Bank 13, 14, 15, 16 and 17), -- connect each pin marked GND* either individually through a 10 kohm resistor -- to GND or tie all pins together and connect through a single 10 kohm resistor -- to GND. -- For non-transceiver I/O banks, connect each pin marked GND* directly to GND -- or leave it unconnected. -- RESERVED : Unused I/O pin, which MUST be left unconnected. -- RESERVED_INPUT : Pin is tri-stated and should be connected to the board. -- RESERVED_INPUT_WITH_WEAK_PULLUP : Pin is tri-stated with internal weak pull-up resistor. -- RESERVED_INPUT_WITH_BUS_HOLD : Pin is tri-stated with bus-hold circuitry. -- RESERVED_OUTPUT_DRIVEN_HIGH : Pin is output driven high. --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- -- Pin directions (input, output or bidir) are based on device operating in user mode. --------------------------------------------------------------------------------- Quartus II Version 7.2 Build 207 03/18/2008 Service Pack 3 SJ Full Version CHIP "interupt" ASSIGNED TO AN: EP1C6Q240C8 Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment ------------------------------------------------------------------------------------------------------------- GND* : 1 : : : : 1 : GND* : 2 : : : : 1 : GND* : 3 : : : : 1 : GND* : 4 : : : : 1 : GND* : 5 : : : : 1 : GND* : 6 : : : : 1 : GND* : 7 : : : : 1 : GND* : 8 : : : : 1 : VCCIO1 : 9 : power : : 3.3V : 1 : GND : 10 : gnd : : : : GND* : 11 : : : : 1 : GND* : 12 : : : : 1 : GND* : 13 : : : : 1 : GND* : 14 : : : : 1 : GND* : 15 : : : : 1 : SDRAM_CKE : 16 : output : 3.3-V LVTTL : : 1 : N GND* : 17 : : : : 1 : GND* : 18 : : : : 1 : GND* : 19 : : : : 1 : GND* : 20 : : : : 1 : GND* : 21 : : : : 1 : VCCIO1 : 22 : power : : 3.3V : 1 : GND* : 23 : : : : 1 : ~nCSO~ / RESERVED_INPUT_WITH_WEAK_PULLUP : 24 : input : 3.3-V LVTTL : : 1 : N DATA0 : 25 : input : : : 1 : nCONFIG : 26 : : : : 1 : VCCA_PLL1 : 27 : power : : 1.5V : : pin_name : 28 : input : 3.3-V LVTTL : : 1 : N pin_name4 : 29 : input : 3.3-V LVTTL : : 1 : N GNDA_PLL1 : 30 : gnd : : : : GNDG_PLL1 : 31 : gnd : : : : nCEO : 32 : : : : 1 : nCE : 33 : : : : 1 : MSEL0 : 34 : : : : 1 : MSEL1 : 35 : : : : 1 : DCLK : 36 : bidir : : : 1 : ~ASDO~ / RESERVED_INPUT_WITH_WEAK_PULLUP : 37 : input : 3.3-V LVTTL : : 1 : N SDRAM_CLK : 38 : output : 3.3-V LVTTL : : 1 : N GND* : 39 : : : : 1 : GND : 40 : gnd : : : : GND* : 41 : : : : 1 : GND* : 42 : : : : 1 : GND* : 43 : : : : 1 : GND* : 44 : : : : 1 : GND* : 45 : : : : 1 : GND* : 46 : : : : 1 : GND* : 47 : : : : 1 : GND* : 48 : : : : 1 : GND* : 49 : : : : 1 : GND* : 50 : : : : 1 : VCCIO1 : 51 : power : : 3.3V : 1 : GND : 52 : gnd : : : : GND* : 53 : : : : 1 : GND* : 54 : : : : 1 : GND* : 55 : : : : 1 : GND* : 56 : : : : 1 : GND* : 57 : : : : 1 : GND* : 58 : : : : 1 : GND* : 59 : : : : 1 : GND* : 60 : : : : 1 : GND* : 61 : : : : 4 : GND* : 62 : : : : 4 : GND* : 63 : : : : 4 : GND* : 64 : : : : 4 : GND* : 65 : : : : 4 : GND* : 66 : : : : 4 : pin_name3 : 67 : input : 3.3-V LVTTL : : 4 : N GND* : 68 : : : : 4 : GND : 69 : gnd : : : : VCCIO4 : 70 : power : : 3.3V : 4 : GND : 71 : gnd : : : : VCCINT : 72 : power : : 1.5V : : GND* : 73 : : : : 4 : GND* : 74 : : : : 4 : GND* : 75 : : : : 4 : GND* : 76 : : : : 4 : GND* : 77 : : : : 4 : GND* : 78 : : : : 4 : GND* : 79 : : : : 4 : GND* : 80 : : : : 4 : GND* : 81 : : : : 4 : GND* : 82 : : : : 4 : GND* : 83 : : : : 4 : GND* : 84 : : : : 4 : GND* : 85 : : : : 4 : GND* : 86 : : : : 4 : GND* : 87 : : : : 4 : GND* : 88 : : : : 4 : GND : 89 : gnd : : : : VCCINT : 90 : power : : 1.5V : : GND : 91 : gnd : : : : VCCIO4 : 92 : power : : 3.3V : 4 : out_port_from_the_led_pio[5] : 93 : output : 3.3-V LVTTL : : 4 : N GND* : 94 : : : : 4 : GND* : 95 : : : : 4 : SDRAM_D[4] : 96 : output : 3.3-V LVTTL : : 4 : N SDRAM_D[6] : 97 : output : 3.3-V LVTTL : : 4 : N SDRAM_D[9] : 98 : output : 3.3-V LVTTL : : 4 : N out_port_from_the_led_pio[6] : 99 : output : 3.3-V LVTTL : : 4 : N out_port_from_the_led_pio[0] : 100 : output : 3.3-V LVTTL : : 4 : N SDRAM_D[13] : 101 : output : 3.3-V LVTTL : : 4 : N SDRAM_D[1] : 102 : output : 3.3-V LVTTL : : 4 : N SDRAM_D[15] : 103 : output : 3.3-V LVTTL : : 4 : N SDRAM_D[11] : 104 : output : 3.3-V LVTTL : : 4 : N SDRAM_D[12] : 105 : output : 3.3-V LVTTL : : 4 : N SDRAM_D[10] : 106 : output : 3.3-V LVTTL : : 4 : N SDRAM_D[14] : 107 : output : 3.3-V LVTTL : : 4 : N SDRAM_D[3] : 108 : output : 3.3-V LVTTL : : 4 : N GND : 109 : gnd : : : : VCCINT : 110 : power : : 1.5V : : GND : 111 : gnd : : : : VCCIO4 : 112 : power : : 3.3V : 4 : SDRAM_D[7] : 113 : output : 3.3-V LVTTL : : 4 : N SDRAM_D[8] : 114 : output : 3.3-V LVTTL : : 4 : N SDRAM_A[2] : 115 : output : 3.3-V LVTTL : : 4 : N SDRAM_D[2] : 116 : output : 3.3-V LVTTL : : 4 : N SDRAM_D[0] : 117 : output : 3.3-V LVTTL : : 4 : N SDRAM_WE : 118 : output : 3.3-V LVTTL : : 4 : N SDRAM_A[9] : 119 : output : 3.3-V LVTTL : : 4 : N SDRAM_A[8] : 120 : output : 3.3-V LVTTL : : 4 : N SDRAM_CS : 121 : output : 3.3-V LVTTL : : 3 : N GND* : 122 : : : : 3 : SDRAM_D[5] : 123 : output : 3.3-V LVTTL : : 3 : N SDRAM_D0[0] : 124 : output : 3.3-V LVTTL : : 3 : N SDRAM_CAS : 125 : output : 3.3-V LVTTL : : 3 : N SDRAM_A[5] : 126 : output : 3.3-V LVTTL : : 3 : N SDRAM_RAS : 127 : output : 3.3-V LVTTL : : 3 : N SDRAM_A[4] : 128 : output : 3.3-V LVTTL : : 3 : N GND : 129 : gnd : : : : VCCIO3 : 130 : power : : 3.3V : 3 : GND* : 131 : : : : 3 : SDRAM_BA[1] : 132 : output : 3.3-V LVTTL : : 3 : N SDRAM_D0[1] : 133 : output : 3.3-V LVTTL : : 3 : N SDRAM_BA[0] : 134 : output : 3.3-V LVTTL : : 3 : N SDRAM_A[0] : 135 : output : 3.3-V LVTTL : : 3 : N SDRAM_A[6] : 136 : output : 3.3-V LVTTL : : 3 : N SDRAM_A[7] : 137 : output : 3.3-V LVTTL : : 3 : N SDRAM_A[11] : 138 : output : 3.3-V LVTTL : : 3 : N SDRAM_A[1] : 139 : output : 3.3-V LVTTL : : 3 : N SDRAM_A[3] : 140 : output : 3.3-V LVTTL : : 3 : N SDRAM_A[10] : 141 : output : 3.3-V LVTTL : : 3 : N GND : 142 : gnd : : : : GND* : 143 : : : : 3 : GND* : 144 : : : : 3 : CONF_DONE : 145 : : : : 3 : nSTATUS : 146 : : : : 3 : altera_reserved_tck : 147 : input : 3.3-V LVTTL : : 3 : N altera_reserved_tms : 148 : input : 3.3-V LVTTL : : 3 : N altera_reserved_tdo : 149 : output : 3.3-V LVTTL : : 3 : N GNDG_PLL2 : 150 : gnd : : : : GNDA_PLL2 : 151 : gnd : : : : GND+ : 152 : : : : 3 : GND+ : 153 : : : : 3 : VCCA_PLL2 : 154 : power : : 1.5V : : altera_reserved_tdi : 155 : input : 3.3-V LVTTL : : 3 : N out_port_from_the_led_pio[2] : 156 : output : 3.3-V LVTTL : : 3 : N VCCIO3 : 157 : power : : 3.3V : 3 : GND* : 158 : : : : 3 : GND* : 159 : : : : 3 : GND* : 160 : : : : 3 : GND* : 161 : : : : 3 : GND* : 162 : : : : 3 : GND* : 163 : : : : 3 : GND* : 164 : : : : 3 : GND* : 165 : : : : 3 : GND* : 166 : : : : 3 : GND* : 167 : : : : 3 : GND* : 168 : : : : 3 : GND* : 169 : : : : 3 : GND* : 170 : : : : 3 : GND : 171 : gnd : : : : VCCIO3 : 172 : power : : 3.3V : 3 : GND* : 173 : : : : 3 : GND* : 174 : : : : 3 : GND* : 175 : : : : 3 : GND* : 176 : : : : 3 : GND* : 177 : : : : 3 : GND* : 178 : : : : 3 : GND* : 179 : : : : 3 : GND* : 180 : : : : 3 : GND* : 181 : : : : 2 : GND* : 182 : : : : 2 : GND* : 183 : : : : 2 : GND* : 184 : : : : 2 : GND* : 185 : : : : 2 : GND* : 186 : : : : 2 : GND* : 187 : : : : 2 : GND* : 188 : : : : 2 : VCCIO2 : 189 : power : : 3.3V : 2 : GND : 190 : gnd : : : : VCCINT : 191 : power : : 1.5V : : GND : 192 : gnd : : : : GND* : 193 : : : : 2 : GND* : 194 : : : : 2 : GND* : 195 : : : : 2 : GND* : 196 : : : : 2 : out_port_from_the_led_pio[7] : 197 : output : 3.3-V LVTTL : : 2 : N GND* : 198 : : : : 2 : GND* : 199 : : : : 2 : out_port_from_the_led_pio[4] : 200 : output : 3.3-V LVTTL : : 2 : N out_port_from_the_led_pio[3] : 201 : output : 3.3-V LVTTL : : 2 : N out_port_from_the_led_pio[1] : 202 : output : 3.3-V LVTTL : : 2 : N GND* : 203 : : : : 2 : GND* : 204 : : : : 2 : GND* : 205 : : : : 2 : GND* : 206 : : : : 2 : GND* : 207 : : : : 2 : GND* : 208 : : : : 2 : VCCIO2 : 209 : power : : 3.3V : 2 : GND : 210 : gnd : : : : VCCINT : 211 : power : : 1.5V : : GND : 212 : gnd : : : : GND* : 213 : : : : 2 : GND* : 214 : : : : 2 : GND* : 215 : : : : 2 : GND* : 216 : : : : 2 : GND* : 217 : : : : 2 : GND* : 218 : : : : 2 : GND* : 219 : : : : 2 : GND* : 220 : : : : 2 : GND* : 221 : : : : 2 : GND* : 222 : : : : 2 : GND* : 223 : : : : 2 : GND* : 224 : : : : 2 : GND* : 225 : : : : 2 : GND* : 226 : : : : 2 : GND* : 227 : : : : 2 : GND* : 228 : : : : 2 : VCCINT : 229 : power : : 1.5V : : GND : 230 : gnd : : : : VCCIO2 : 231 : power : : 3.3V : 2 : GND : 232 : gnd : : : : GND* : 233 : : : : 2 : GND* : 234 : : : : 2 : GND* : 235 : : : : 2 : GND* : 236 : : : : 2 : GND* : 237 : : : : 2 : GND* : 238 : : : : 2 : GND* : 239 : : : : 2 : GND* : 240 : : : : 2 :