www.pudn.com > interupt.rar > cntr_70j.tdf

--lpm_counter CBX_DECLARE_ALL_CONNECTED_PORTS="OFF" DEVICE_FAMILY="Cyclone" lpm_direction="UP" lpm_port_updown="PORT_UNUSED" lpm_width=10 aclr clock cnt_en cout q CARRY_CHAIN="MANUAL" CARRY_CHAIN_LENGTH=48 
--VERSION_BEGIN 7.2SP3 cbx_cycloneii 2007:06:13:15:47:32:SJ cbx_lpm_add_sub 2007:08:06:16:01:34:SJ cbx_lpm_compare 2007:06:21:15:54:06:SJ cbx_lpm_counter 2007:08:07:01:40:08:SJ cbx_lpm_decode 2007:03:12:19:01:52:SJ cbx_mgl 2007:08:03:15:48:12:SJ cbx_stratix 2007:10:18:20:36:46:SJ cbx_stratixii 2007:10:19:15:30:42:SJ  VERSION_END 
 
 
-- Copyright (C) 1991-2007 Altera Corporation 
--  Your use of Altera Corporation's design tools, logic functions  
--  and other software and tools, and its AMPP partner logic  
--  functions, and any output files from any of the foregoing  
--  (including device programming or simulation files), and any  
--  associated documentation or information are expressly subject  
--  to the terms and conditions of the Altera Program License  
--  Subscription Agreement, Altera MegaCore Function License  
--  Agreement, or other applicable license agreement, including,  
--  without limitation, that your use is for the sole purpose of  
--  programming logic devices manufactured by Altera and sold by  
--  Altera or its authorized distributors.  Please refer to the  
--  applicable agreement for further details. 
 
 
FUNCTION cyclone_lcell (aclr, aload, cin, clk, dataa, datab, datac, datad, ena, inverta, regcascin, sclr, sload) 
WITH ( cin0_used, cin1_used, cin_used, lut_mask, operation_mode, output_mode, power_up, register_cascade_mode, sum_lutc_input, synch_mode, x_on_violation) 
RETURNS ( combout, cout, regout); 
 
--synthesis_resources = lut 11  
SUBDESIGN cntr_70j 
(  
	aclr	:	input; 
	clock	:	input; 
	cnt_en	:	input; 
	cout	:	output; 
	q[9..0]	:	output; 
)  
VARIABLE  
	counter_cella0 : cyclone_lcell 
		WITH ( 
			cin_used = "false", 
			lut_mask = "66AA", 
			operation_mode = "arithmetic", 
			synch_mode = "on" 
		); 
	counter_cella1 : cyclone_lcell 
		WITH ( 
			cin_used = "true", 
			lut_mask = "6AA0", 
			operation_mode = "arithmetic", 
			sum_lutc_input = "cin", 
			synch_mode = "on" 
		); 
	counter_cella2 : cyclone_lcell 
		WITH ( 
			cin_used = "true", 
			lut_mask = "6AA0", 
			operation_mode = "arithmetic", 
			sum_lutc_input = "cin", 
			synch_mode = "on" 
		); 
	counter_cella3 : cyclone_lcell 
		WITH ( 
			cin_used = "true", 
			lut_mask = "6AA0", 
			operation_mode = "arithmetic", 
			sum_lutc_input = "cin", 
			synch_mode = "on" 
		); 
	counter_cella4 : cyclone_lcell 
		WITH ( 
			cin_used = "true", 
			lut_mask = "6AA0", 
			operation_mode = "arithmetic", 
			sum_lutc_input = "cin", 
			synch_mode = "on" 
		); 
	counter_cella5 : cyclone_lcell 
		WITH ( 
			cin_used = "true", 
			lut_mask = "6AA0", 
			operation_mode = "arithmetic", 
			sum_lutc_input = "cin", 
			synch_mode = "on" 
		); 
	counter_cella6 : cyclone_lcell 
		WITH ( 
			cin_used = "true", 
			lut_mask = "6AA0", 
			operation_mode = "arithmetic", 
			sum_lutc_input = "cin", 
			synch_mode = "on" 
		); 
	counter_cella7 : cyclone_lcell 
		WITH ( 
			cin_used = "true", 
			lut_mask = "6AA0", 
			operation_mode = "arithmetic", 
			sum_lutc_input = "cin", 
			synch_mode = "on" 
		); 
	counter_cella8 : cyclone_lcell 
		WITH ( 
			cin_used = "true", 
			lut_mask = "6AA0", 
			operation_mode = "arithmetic", 
			sum_lutc_input = "cin", 
			synch_mode = "on" 
		); 
	counter_cella9 : cyclone_lcell 
		WITH ( 
			cin_used = "true", 
			lut_mask = "6AA0", 
			operation_mode = "arithmetic", 
			sum_lutc_input = "cin", 
			synch_mode = "on" 
		); 
	cout_bit : cyclone_lcell 
		WITH ( 
			cin_used = "true", 
			lut_mask = "F0F0", 
			operation_mode = "normal", 
			sum_lutc_input = "cin", 
			synch_mode = "off" 
		); 
	aclr_actual	: WIRE; 
	clk_en	: NODE; 
	data[9..0]	: NODE; 
	s_val[9..0]	: WIRE; 
	safe_q[9..0]	: WIRE; 
	sclr	: NODE; 
	sload	: NODE; 
	sset	: NODE; 
	sset_node	: WIRE; 
	time_to_clear	: WIRE; 
	updownDir	: WIRE; 
 
BEGIN  
	counter_cella[9..0].aclr = aclr_actual; 
	counter_cella[9..0].aload = B"0000000000"; 
	counter_cella[1].cin = counter_cella[0].cout; 
	counter_cella[2].cin = counter_cella[1].cout; 
	counter_cella[3].cin = counter_cella[2].cout; 
	counter_cella[4].cin = counter_cella[3].cout; 
	counter_cella[5].cin = counter_cella[4].cout; 
	counter_cella[6].cin = counter_cella[5].cout; 
	counter_cella[7].cin = counter_cella[6].cout; 
	counter_cella[8].cin = counter_cella[7].cout; 
	counter_cella[9].cin = counter_cella[8].cout; 
	counter_cella[9..0].clk = clock; 
	counter_cella[9..0].dataa = safe_q[]; 
	counter_cella[9..0].datab = cnt_en; 
	counter_cella[9..0].datac = ((sset & s_val[]) # ((! sset) & data[])); 
	counter_cella[9..0].ena = clk_en; 
	counter_cella[9..0].sclr = sclr; 
	counter_cella[9..0].sload = (sset_node # sload); 
	cout_bit.cin = counter_cella[9].cout; 
	cout_bit.dataa = updownDir; 
	cout_bit.datab = time_to_clear; 
	aclr_actual = aclr; 
	clk_en = VCC; 
	cout = cout_bit.combout; 
	data[] = GND; 
	q[] = safe_q[]; 
	s_val[] = B"1111111111"; 
	safe_q[] = counter_cella[9..0].regout; 
	sclr = GND; 
	sload = GND; 
	sset = GND; 
	sset_node = B"0"; 
	time_to_clear = B"0"; 
	updownDir = B"1"; 
END; 
--VALID FILE