www.pudn.com > hhu_pfcp.rar > case9.m

function [baseMVA, bus, gen, branch, areas, gencost] = case9
%CASE9    Power flow data for 9 bus, 3 generator case.
%   Please see 'help caseformat' for details on the case file format.
%
%   Based on data from Joe H. Chow's book, p. 70.

%   MATPOWER
%   $Id: case9.m,v 1.7 2007/09/17 16:07:48 ray Exp $

%%-----  Power Flow Data  -----%%
%% system MVA base
baseMVA = 100;

%% bus data
%	bus_i	type	Pd	Qd	Gs	Bs	area	Vm	Va	baseKV	zone	Vmax	Vmin
bus = [
	1	3	0	0	0	0	1	1	0	345	1	1.1	0.9;
	2	2	0	0	0	0	1	1	0	345	1	1.1	0.9;
	3	2	0	0	0	0	1	1	0	345	1	1.1	0.9;
	4	1	0	0	0	0	1	1	0	345	1	1.1	0.9;
	5	1	90	30	0	0	1	1	0	345	1	1.1	0.9;
	6	1	0	0	0	0	1	1	0	345	1	1.1	0.9;
	7	1	100	35	0	0	1	1	0	345	1	1.1	0.9;
	8	1	0	0	0	0	1	1	0	345	1	1.1	0.9;
	9	1	125	50	0	0	1	1	0	345	1	1.1	0.9;
];

%% generator data
%	bus	Pg	Qg	Qmax	Qmin	Vg	mBase	status	Pmax	Pmin
gen = [
	1	0	0	300	-300	1	100	1	250	10;
	2	163	0	300	-300	1	100	1	300	10;
	3	85	0	300	-300	1	100	1	270	10;
];

%% branch data
%	fbus	tbus	r	x	b	rateA	rateB	rateC	ratio	angle	status
branch = [
	1	4	0	0.0576	0	250	250	250	0	0	1;
	4	5	0.017	0.092	0.158	250	250	250	0	0	1;
	5	6	0.039	0.17	0.358	150	150	150	0	0	1;
	3	6	0	0.0586	0	300	300	300	0	0	1;
	6	7	0.0119	0.1008	0.209	150	150	150	0	0	1;
	7	8	0.0085	0.072	0.149	250	250	250	0	0	1;
	8	2	0	0.0625	0	250	250	250	0	0	1;
	8	9	0.032	0.161	0.306	250	250	250	0	0	1;
	9	4	0.01	0.085	0.176	250	250	250	0	0	1;
];

%%-----  OPF Data  -----%%
%% area data
areas = [
	1	5;
];

%% generator cost data
%	1	startup	shutdown	n	x1	y1	...	xn	yn
%	2	startup	shutdown	n	c(n-1)	...	c0


return;