www.pudn.com > multiprocessor.rar > jtag_uart_1.v
//Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
//use of Altera Corporation's design tools, logic functions and other
//software and tools, and its AMPP partner logic functions, and any
//output files any of the foregoing (including device programming or
//simulation files), and any associated documentation or information are
//expressly subject to the terms and conditions of the Altera Program
//License Subscription Agreement or other applicable license agreement,
//including, without limitation, that your use is for the sole purpose
//of programming logic devices manufactured by Altera and sold by Altera
//or its authorized distributors. Please refer to the applicable
//agreement for further details.
// synthesis translate_off
`timescale 1ns / 1ps
// synthesis translate_on
// turn off superfluous verilog processor warnings
// altera message_level Level1
// altera message_off 10034 10035 10036 10037 10230 10240 10030
module jtag_uart_1_log_module (
// inputs:
clk,
data,
strobe,
valid
)
;
input clk;
input [ 7: 0] data;
input strobe;
input valid;
//synthesis translate_off
//////////////// SIMULATION-ONLY CONTENTS
reg [31:0] text_handle; // for $fopen
initial text_handle = $fopen ("G:/Q71/multiprocessor/nios_sim/jtag_uart_1_output_stream.dat");
always @(posedge clk) begin
if (valid && strobe) begin
$fwrite (text_handle, "%b\n", data);
// echo raw binary strings to file as ascii to screen
$write("%s", ((data == 8'hd) ? 8'ha : data));
// non-standard; poorly documented; required to get real data stream.
$fflush (text_handle);
end
end // clk
//////////////// END SIMULATION-ONLY CONTENTS
//synthesis translate_on
endmodule
// turn off superfluous verilog processor warnings
// altera message_level Level1
// altera message_off 10034 10035 10036 10037 10230 10240 10030
module jtag_uart_1_sim_scfifo_w (
// inputs:
clk,
fifo_wdata,
fifo_wr,
// outputs:
fifo_FF,
r_dat,
wfifo_empty,
wfifo_used
)
;
output fifo_FF;
output [ 7: 0] r_dat;
output wfifo_empty;
output [ 5: 0] wfifo_used;
input clk;
input [ 7: 0] fifo_wdata;
input fifo_wr;
wire fifo_FF;
wire [ 7: 0] r_dat;
wire wfifo_empty;
wire [ 5: 0] wfifo_used;
//synthesis translate_off
//////////////// SIMULATION-ONLY CONTENTS
//jtag_uart_1_log, which is an e_log
jtag_uart_1_log_module jtag_uart_1_log
(
.clk (clk),
.data (fifo_wdata),
.strobe (fifo_wr),
.valid (fifo_wr)
);
assign wfifo_used = {6{1'b0}};
assign r_dat = {8{1'b0}};
assign fifo_FF = 1'b0;
assign wfifo_empty = 1'b1;
//////////////// END SIMULATION-ONLY CONTENTS
//synthesis translate_on
endmodule
// turn off superfluous verilog processor warnings
// altera message_level Level1
// altera message_off 10034 10035 10036 10037 10230 10240 10030
module jtag_uart_1_scfifo_w (
// inputs:
clk,
fifo_clear,
fifo_wdata,
fifo_wr,
rd_wfifo,
// outputs:
fifo_FF,
r_dat,
wfifo_empty,
wfifo_used
)
;
output fifo_FF;
output [ 7: 0] r_dat;
output wfifo_empty;
output [ 5: 0] wfifo_used;
input clk;
input fifo_clear;
input [ 7: 0] fifo_wdata;
input fifo_wr;
input rd_wfifo;
wire fifo_FF;
wire [ 7: 0] r_dat;
wire wfifo_empty;
wire [ 5: 0] wfifo_used;
//synthesis translate_off
//////////////// SIMULATION-ONLY CONTENTS
jtag_uart_1_sim_scfifo_w the_jtag_uart_1_sim_scfifo_w
(
.clk (clk),
.fifo_FF (fifo_FF),
.fifo_wdata (fifo_wdata),
.fifo_wr (fifo_wr),
.r_dat (r_dat),
.wfifo_empty (wfifo_empty),
.wfifo_used (wfifo_used)
);
//////////////// END SIMULATION-ONLY CONTENTS
//synthesis translate_on
//synthesis read_comments_as_HDL on
// scfifo wfifo
// (
// .aclr (fifo_clear),
// .clock (clk),
// .data (fifo_wdata),
// .empty (wfifo_empty),
// .full (fifo_FF),
// .q (r_dat),
// .rdreq (rd_wfifo),
// .usedw (wfifo_used),
// .wrreq (fifo_wr)
// );
//
// defparam wfifo.lpm_hint = "RAM_BLOCK_TYPE=AUTO",
// wfifo.lpm_numwords = 64,
// wfifo.lpm_showahead = "OFF",
// wfifo.lpm_type = "scfifo",
// wfifo.lpm_width = 8,
// wfifo.lpm_widthu = 6,
// wfifo.overflow_checking = "OFF",
// wfifo.underflow_checking = "OFF",
// wfifo.use_eab = "ON";
//
//synthesis read_comments_as_HDL off
endmodule
// turn off superfluous verilog processor warnings
// altera message_level Level1
// altera message_off 10034 10035 10036 10037 10230 10240 10030
module jtag_uart_1_drom_module (
// inputs:
clk,
incr_addr,
reset_n,
// outputs:
new_rom,
num_bytes,
q,
safe
)
;
parameter POLL_RATE = 100;
output new_rom;
output [ 31: 0] num_bytes;
output [ 7: 0] q;
output safe;
input clk;
input incr_addr;
input reset_n;
reg [ 11: 0] address;
reg d1_pre;
reg d2_pre;
reg d3_pre;
reg d4_pre;
reg d5_pre;
reg d6_pre;
reg d7_pre;
reg d8_pre;
reg d9_pre;
reg [ 7: 0] mem_array [2047: 0];
reg [ 31: 0] mutex [ 1: 0];
reg new_rom;
wire [ 31: 0] num_bytes;
reg pre;
wire [ 7: 0] q;
wire safe;
//synthesis translate_off
//////////////// SIMULATION-ONLY CONTENTS
assign q = mem_array[address];
always @(posedge clk or negedge reset_n)
begin
if (reset_n == 0)
begin
d1_pre <= 0;
d2_pre <= 0;
d3_pre <= 0;
d4_pre <= 0;
d5_pre <= 0;
d6_pre <= 0;
d7_pre <= 0;
d8_pre <= 0;
d9_pre <= 0;
new_rom <= 0;
end
else if (1)
begin
d1_pre <= pre;
d2_pre <= d1_pre;
d3_pre <= d2_pre;
d4_pre <= d3_pre;
d5_pre <= d4_pre;
d6_pre <= d5_pre;
d7_pre <= d6_pre;
d8_pre <= d7_pre;
d9_pre <= d8_pre;
new_rom <= d9_pre;
end
end
assign num_bytes = mutex[1];
reg safe_delay;
reg [31:0] poll_count;
reg [31:0] mutex_handle;
wire interactive = 1'b0 ; // '
assign safe = (address < mutex[1]);
initial poll_count = POLL_RATE;
always @(posedge clk or negedge reset_n) begin
if (reset_n !== 1) begin
safe_delay <= 0;
end else begin
safe_delay <= safe;
end
end // safe_delay
always @(posedge clk or negedge reset_n) begin
if (reset_n !== 1) begin // dont worry about null _stream.dat file
address <= 0;
mem_array[0] <= 0;
mutex[0] <= 0;
mutex[1] <= 0;
pre <= 0;
end else begin // deal with the non-reset case
pre <= 0;
if (incr_addr && safe) address <= address + 1;
if (mutex[0] && !safe && safe_delay) begin
// and blast the mutex after falling edge of safe if interactive
if (interactive) begin
mutex_handle = $fopen ("G:/Q71/multiprocessor/nios_sim/jtag_uart_1_input_mutex.dat");
$fdisplay (mutex_handle, "0");
$fclose (mutex_handle);
// $display ($stime, "\t%m:\n\t\tMutex cleared!");
end else begin
// sleep until next reset, do not bash mutex.
wait (!reset_n);
end
end // OK to bash mutex.
if (poll_count < POLL_RATE) begin // wait
poll_count = poll_count + 1;
end else begin // do the interesting stuff.
poll_count = 0;
$readmemh ("G:/Q71/multiprocessor/nios_sim/jtag_uart_1_input_mutex.dat", mutex);
if (mutex[0] && !safe) begin
// read stream into mem_array after current characters are gone!
// save mutex[0] value to compare to address (generates 'safe')
mutex[1] <= mutex[0];
// $display ($stime, "\t%m:\n\t\tMutex hit: Trying to read %d bytes...", mutex[0]);
$readmemb("G:/Q71/multiprocessor/nios_sim/jtag_uart_1_input_stream.dat", mem_array);
// bash address and send pulse outside to send the char:
address <= 0;
pre <= -1;
end // else mutex miss...
end // poll_count
end // reset
end // posedge clk
//////////////// END SIMULATION-ONLY CONTENTS
//synthesis translate_on
endmodule
// turn off superfluous verilog processor warnings
// altera message_level Level1
// altera message_off 10034 10035 10036 10037 10230 10240 10030
module jtag_uart_1_sim_scfifo_r (
// inputs:
clk,
fifo_rd,
rst_n,
// outputs:
fifo_EF,
fifo_rdata,
rfifo_full,
rfifo_used
)
;
output fifo_EF;
output [ 7: 0] fifo_rdata;
output rfifo_full;
output [ 5: 0] rfifo_used;
input clk;
input fifo_rd;
input rst_n;
reg [ 31: 0] bytes_left;
wire fifo_EF;
reg fifo_rd_d;
wire [ 7: 0] fifo_rdata;
wire new_rom;
wire [ 31: 0] num_bytes;
wire [ 6: 0] rfifo_entries;
wire rfifo_full;
wire [ 5: 0] rfifo_used;
wire safe;
//synthesis translate_off
//////////////// SIMULATION-ONLY CONTENTS
//jtag_uart_1_drom, which is an e_drom
jtag_uart_1_drom_module jtag_uart_1_drom
(
.clk (clk),
.incr_addr (fifo_rd_d),
.new_rom (new_rom),
.num_bytes (num_bytes),
.q (fifo_rdata),
.reset_n (rst_n),
.safe (safe)
);
// Generate rfifo_entries for simulation
always @(posedge clk or negedge rst_n)
begin
if (rst_n == 0)
begin
bytes_left <= 32'h0;
fifo_rd_d <= 1'b0;
end
else
begin
fifo_rd_d <= fifo_rd;
// decrement on read
if (fifo_rd_d)
bytes_left <= bytes_left - 1'b1;
// catch new contents
if (new_rom)
bytes_left <= num_bytes;
end
end
assign fifo_EF = bytes_left == 32'b0;
assign rfifo_full = bytes_left > 7'h40;
assign rfifo_entries = (rfifo_full) ? 7'h40 : bytes_left;
assign rfifo_used = rfifo_entries[5 : 0];
//////////////// END SIMULATION-ONLY CONTENTS
//synthesis translate_on
endmodule
// turn off superfluous verilog processor warnings
// altera message_level Level1
// altera message_off 10034 10035 10036 10037 10230 10240 10030
module jtag_uart_1_scfifo_r (
// inputs:
clk,
fifo_clear,
fifo_rd,
rst_n,
t_dat,
wr_rfifo,
// outputs:
fifo_EF,
fifo_rdata,
rfifo_full,
rfifo_used
)
;
output fifo_EF;
output [ 7: 0] fifo_rdata;
output rfifo_full;
output [ 5: 0] rfifo_used;
input clk;
input fifo_clear;
input fifo_rd;
input rst_n;
input [ 7: 0] t_dat;
input wr_rfifo;
wire fifo_EF;
wire [ 7: 0] fifo_rdata;
wire rfifo_full;
wire [ 5: 0] rfifo_used;
//synthesis translate_off
//////////////// SIMULATION-ONLY CONTENTS
jtag_uart_1_sim_scfifo_r the_jtag_uart_1_sim_scfifo_r
(
.clk (clk),
.fifo_EF (fifo_EF),
.fifo_rd (fifo_rd),
.fifo_rdata (fifo_rdata),
.rfifo_full (rfifo_full),
.rfifo_used (rfifo_used),
.rst_n (rst_n)
);
//////////////// END SIMULATION-ONLY CONTENTS
//synthesis translate_on
//synthesis read_comments_as_HDL on
// scfifo rfifo
// (
// .aclr (fifo_clear),
// .clock (clk),
// .data (t_dat),
// .empty (fifo_EF),
// .full (rfifo_full),
// .q (fifo_rdata),
// .rdreq (fifo_rd),
// .usedw (rfifo_used),
// .wrreq (wr_rfifo)
// );
//
// defparam rfifo.lpm_hint = "RAM_BLOCK_TYPE=AUTO",
// rfifo.lpm_numwords = 64,
// rfifo.lpm_showahead = "OFF",
// rfifo.lpm_type = "scfifo",
// rfifo.lpm_width = 8,
// rfifo.lpm_widthu = 6,
// rfifo.overflow_checking = "OFF",
// rfifo.underflow_checking = "OFF",
// rfifo.use_eab = "ON";
//
//synthesis read_comments_as_HDL off
endmodule
// turn off superfluous verilog processor warnings
// altera message_level Level1
// altera message_off 10034 10035 10036 10037 10230 10240 10030
module jtag_uart_1 (
// inputs:
av_address,
av_chipselect,
av_read_n,
av_write_n,
av_writedata,
clk,
rst_n,
// outputs:
av_irq,
av_readdata,
av_waitrequest,
dataavailable,
readyfordata
)
/* synthesis ALTERA_ATTRIBUTE = "SUPPRESS_DA_RULE_INTERNAL=\"R101,C106,D101,D103\"" */ ;
output av_irq;
output [ 31: 0] av_readdata;
output av_waitrequest;
output dataavailable;
output readyfordata;
input av_address;
input av_chipselect;
input av_read_n;
input av_write_n;
input [ 31: 0] av_writedata;
input clk;
input rst_n;
reg ac;
wire activity;
wire av_irq;
wire [ 31: 0] av_readdata;
reg av_waitrequest;
reg dataavailable;
reg fifo_AE;
reg fifo_AF;
wire fifo_EF;
wire fifo_FF;
wire fifo_clear;
wire fifo_rd;
wire [ 7: 0] fifo_rdata;
wire [ 7: 0] fifo_wdata;
reg fifo_wr;
reg ien_AE;
reg ien_AF;
wire ipen_AE;
wire ipen_AF;
reg pause_irq;
wire [ 7: 0] r_dat;
wire r_ena;
reg r_val;
wire rd_wfifo;
reg read_0;
reg readyfordata;
wire rfifo_full;
wire [ 5: 0] rfifo_used;
reg rvalid;
reg sim_r_ena;
reg sim_t_dat;
reg sim_t_ena;
reg sim_t_pause;
wire [ 7: 0] t_dat;
reg t_dav;
wire t_ena;
wire t_pause;
wire wfifo_empty;
wire [ 5: 0] wfifo_used;
reg woverflow;
wire wr_rfifo;
//avalon_jtag_slave, which is an e_avalon_slave
assign rd_wfifo = r_ena & ~wfifo_empty;
assign wr_rfifo = t_ena & ~rfifo_full;
assign fifo_clear = ~rst_n;
jtag_uart_1_scfifo_w the_jtag_uart_1_scfifo_w
(
.clk (clk),
.fifo_FF (fifo_FF),
.fifo_clear (fifo_clear),
.fifo_wdata (fifo_wdata),
.fifo_wr (fifo_wr),
.r_dat (r_dat),
.rd_wfifo (rd_wfifo),
.wfifo_empty (wfifo_empty),
.wfifo_used (wfifo_used)
);
jtag_uart_1_scfifo_r the_jtag_uart_1_scfifo_r
(
.clk (clk),
.fifo_EF (fifo_EF),
.fifo_clear (fifo_clear),
.fifo_rd (fifo_rd),
.fifo_rdata (fifo_rdata),
.rfifo_full (rfifo_full),
.rfifo_used (rfifo_used),
.rst_n (rst_n),
.t_dat (t_dat),
.wr_rfifo (wr_rfifo)
);
assign ipen_AE = ien_AE & fifo_AE;
assign ipen_AF = ien_AF & (pause_irq | fifo_AF);
assign av_irq = ipen_AE | ipen_AF;
assign activity = t_pause | t_ena;
always @(posedge clk or negedge rst_n)
begin
if (rst_n == 0)
pause_irq <= 1'b0;
else // only if fifo is not empty...
if (t_pause & ~fifo_EF)
pause_irq <= 1'b1;
else if (read_0)
pause_irq <= 1'b0;
end
always @(posedge clk or negedge rst_n)
begin
if (rst_n == 0)
begin
r_val <= 1'b0;
t_dav <= 1'b1;
end
else
begin
r_val <= r_ena & ~wfifo_empty;
t_dav <= ~rfifo_full;
end
end
always @(posedge clk or negedge rst_n)
begin
if (rst_n == 0)
begin
fifo_AE <= 1'b0;
fifo_AF <= 1'b0;
fifo_wr <= 1'b0;
rvalid <= 1'b0;
read_0 <= 1'b0;
ien_AE <= 1'b0;
ien_AF <= 1'b0;
ac <= 1'b0;
woverflow <= 1'b0;
av_waitrequest <= 1'b1;
end
else
begin
fifo_AE <= {fifo_FF,wfifo_used} <= 8;
fifo_AF <= (7'h40 - {rfifo_full,rfifo_used}) <= 8;
fifo_wr <= 1'b0;
read_0 <= 1'b0;
av_waitrequest <= ~(av_chipselect & (~av_write_n | ~av_read_n) & av_waitrequest);
if (activity)
ac <= 1'b1;
// write
if (av_chipselect & ~av_write_n & av_waitrequest)
// addr 1 is control; addr 0 is data
if (av_address)
begin
ien_AF <= av_writedata[0];
ien_AE <= av_writedata[1];
if (av_writedata[10] & ~activity)
ac <= 1'b0;
end
else
begin
fifo_wr <= ~fifo_FF;
woverflow <= fifo_FF;
end
// read
if (av_chipselect & ~av_read_n & av_waitrequest)
begin
// addr 1 is interrupt; addr 0 is data
if (~av_address)
rvalid <= ~fifo_EF;
read_0 <= ~av_address;
end
end
end
assign fifo_wdata = av_writedata[7 : 0];
assign fifo_rd = (av_chipselect & ~av_read_n & av_waitrequest & ~av_address) ? ~fifo_EF : 1'b0;
assign av_readdata = read_0 ? { {9{1'b0}},rfifo_full,rfifo_used,rvalid,woverflow,~fifo_FF,~fifo_EF,1'b0,ac,ipen_AE,ipen_AF,fifo_rdata } : { {9{1'b0}},(7'h40 - {fifo_FF,wfifo_used}),rvalid,woverflow,~fifo_FF,~fifo_EF,1'b0,ac,ipen_AE,ipen_AF,{6{1'b0}},ien_AE,ien_AF };
always @(posedge clk or negedge rst_n)
begin
if (rst_n == 0)
readyfordata <= 0;
else if (1)
readyfordata <= ~fifo_FF;
end
//synthesis translate_off
//////////////// SIMULATION-ONLY CONTENTS
// Tie off Atlantic Interface signals not used for simulation
always @(posedge clk)
begin
sim_t_pause <= 1'b0;
sim_t_ena <= 1'b0;
sim_t_dat <= t_dav ? r_dat : {8{r_val}};
sim_r_ena <= 1'b0;
end
assign r_ena = sim_r_ena;
assign t_ena = sim_t_ena;
assign t_dat = sim_t_dat;
assign t_pause = sim_t_pause;
always @(fifo_EF)
begin
if (1)
dataavailable <= ~fifo_EF;
end
//////////////// END SIMULATION-ONLY CONTENTS
//synthesis translate_on
//synthesis read_comments_as_HDL on
// alt_jtag_atlantic jtag_uart_1_alt_jtag_atlantic
// (
// .clk (clk),
// .r_dat (r_dat),
// .r_ena (r_ena),
// .r_val (r_val),
// .rst_n (rst_n),
// .t_dat (t_dat),
// .t_dav (t_dav),
// .t_ena (t_ena),
// .t_pause (t_pause)
// );
//
// defparam jtag_uart_1_alt_jtag_atlantic.INSTANCE_ID = 0,
// jtag_uart_1_alt_jtag_atlantic.LOG2_RXFIFO_DEPTH = 6,
// jtag_uart_1_alt_jtag_atlantic.LOG2_TXFIFO_DEPTH = 6;
//
// always @(posedge clk or negedge rst_n)
// begin
// if (rst_n == 0)
// dataavailable <= 0;
// else if (1)
// dataavailable <= ~fifo_EF;
// end
//
//
//synthesis read_comments_as_HDL off
endmodule