www.pudn.com > at90usb128-demo-cdc-1_0_3.zip > config.h

//! @file config.h,v 
//! 
//! Copyright (c) 2006 Atmel. 
//! 
//! Please read file license.txt for copyright notice. 
//! 
//! This file contains the system configuration definition 
//! 
//! @version 1.2 at90usb128-demo-cdc-1_0_3 $Id: config.h,v 1.2 2006/07/07 13:59:36 rletendu Exp $ 
//! 
//! @todo 
//! @bug 
 
#ifndef _CONFIG_H_ 
#define _CONFIG_H_ 
 
//! @defgroup global_config Application configuration 
//! @{ 
 
//_____ I N C L U D E S ____________________________________________________ 
 
 
#ifdef AVRGCC 
   #define __AVR_AT90USBxxx__ 
#endif 
 
#include "lib_mcu\compiler.h" //!< Compiler definitions 
 
 
#ifdef AVRGCC 
   #include  
#else 
   #include "lib_mcu\mcu.h" //!< Register declaration 
#endif 
#include "conf/conf_scheduler.h" //!< Scheduler tasks declaration 
 
#define  STK525   0 
#define  USBKEY   1 
 
//! Enable or not the ADC usage 
#undef  USE_ADC 
//! To include proper target hardware definitions, select 
//! target board (USBKEY or STK525) 
#define TARGET_BOARD STK525 
 
#if (TARGET_BOARD==USBKEY) 
   //! @warning for #define USBKEY_HAS_321_DF, only first prototypes versions have AT45DB321C memories 
   //! should be undefined for std series 
   #define USBKEY_HAS_321_DF 
   #include "lib_board\usb_key\usb_key.h" 
#elif (TARGET_BOARD==STK525) 
   #include "lib_board\stk_525\stk_525.h" 
#else 
   #error TARGET_BOARD must be defined somewhere 
#endif 
 
 
//! CPU core frequency in kHz 
#define FOSC 8000 
 
 
// -------- END Generic Configuration ------------------------------------- 
 
// UART Sample configuration, if we have one ... __________________________ 
#define BAUDRATE        38400 
#define USE_UART2 
#define UART_U2 
 
//#define uart_putchar putchar 
#ifndef AVRGCC 
   #define uart_usb_putchar putchar 
#endif 
#define r_uart_ptchar int 
#define p_uart_ptchar int 
 
#define NB_MS_BEFORE_FLUSH			50 
#define REPEAT_KEY_PRESSED       100 
 
// ADC Sample configuration, if we have one ... ___________________________ 
 
//! ADC Prescaler value 
#define ADC_PRESCALER 64 
//! Right adjust 
#define ADC_RIGHT_ADJUST_RESULT 1 
//! AVCC As reference voltage (See adc_drv.h) 
#define ADC_INTERNAL_VREF  2 
 
//!Mouse configuration 
#define NB_IDLE_POLLING_SOF  3   //!10ms before looking for new mouse hardware event 
#define MOUSE_SPEED          1 
 
//! @} 
 
#endif // _CONFIG_H_