www.pudn.com > SenseISODemo.rar > Language.h

/* 
#define C_TAB_PAGE_READ		"Read Tag" 
#define C_TAB_PAGE_TAGDATA	"Tag Data" 
#define C_TAB_PAGE_CONFIG		"Config" 
 
#define C_COM_AREADY_OPEN	"COM Port Opened!" 
#define C_HINT				"Hint" 
#define C_OPEN_COM_FAIL	"Open the Com port is failed, please check the connection of the port and if the Com port is occupied!" 
#define C_STATUS		"Status" 
#define C_STATUS_OK		"OK" 
#define C_STATUS_NO		"Disconnect" 
#define C_RESET_SUCCESS	"Reader resetting is successful!" 
#define C_RESET_FAIL	"Reader resetting is failed!(%02X)" 
#define C_SCANNER_VERSION "Version"	 
 
#define C_LISTVIEW_FONT		"MS Gothic"	 
#define C_IGNORE	 "Null" 
 
#define C_SET_SELECT_TAG_SUCCESS	 "Setting selection condition is success!" 
#define C_SET_SELECT_TAG_FAIL	 "Setting selection condition is failed!(0x%02X)" 
 
#define C_GET_TAG_ADDRESS_DATA_SUCC		"Tag ID:%s Address£º%02d ! Value:%s" 
#define C_GET_TAG_ADDRESS_DATA_FAIL		"Data Reading is failed! Tag ID:%s Address£º0x%02X" 
#define C_NO_TAG_CANNT_WRITE			"No tag in the reading area, Writing is failed!" 
#define C_WRITE_TAG_SUCC				"Writing is success!" 
#define C_WRITE_TAG_FAIL				"Writeing is failed!(%02X)" 
#define C_NO_TAG_CANNT_LOCK				"No tag in reading erea,it can not be locked!" 
#define C_LOCK_ALARM					"After locking,the data of the address can not be modified. Are you sure it should be locked?" 
#define C_WARNING						"Warning" 
#define C_LOCK_ADDRESS_SUCC_ADDRESS		"The data of the address locking is success! Address:%02d" 
#define C_LOCK_ADDRESS_FAIL				"The data of the address locking is failed!(%02X)" 
#define C_NO_SEARCH_TAG					"No tag in the reading area!" 
#define C_LOCK_STATUS_LOCKED			"Locked" 
#define C_LOCK_STATUS_NO_LOCKED			"No locked" 
 
#define C_QUERY_ADDRESS_STATUS_OK_ADDRESS_STATUS		"Memory Locking status query is success! Address:%02d Status:%s" 
#define C_QUERY_ADDRESS_STATUS_FAIL_ADDRESS_ERRORID		"Memory Locking status query is failed! Address:%02d; (%02X)" 
#define C_QUERY_LOCK_ADDRESS_FAIL						"Memory Locking is failed!(%02X)" 
#define C_START_CONTINUES_MTR_ADDRESS					"Multi-tag continues reading is success! Address(%02d)" 
#define C_START_CONTINUES_MTR_FAIL_ERRORID				"Multi-tag continues reading is failed!(%02X)" 
 
#define C_ADDRESS					"Address" 
#define C_VALUE						"Value" 
#define C_CURRENT_ANT_NO_TAG		"No tag in the reading area!" 
#define C_TAG_DATA					"Tag data" 
#define C_READ_TAG_FAIL				"Tag read is failed! " 
 
#define C_HOPPING "Hopping"	 
#define C_SET_RF_SUCC_VALUE			"RF Power setting is success! The power is %s" 
#define C_SET_RF_FAIL_ERRORID		"RF Power setting is failed! (%02X)" 
#define C_QUERY_RF_SUCC_VALUE		"RF Power query is success! The power is %s" 
#define C_QUERY_RF_FAIL_ERRORID		"RF Power query is failed£¡(%02X)" 
#define C_OPEN_RF_SUCC				"RF Power Amplifier is turned on!" 
#define C_OPEN_RF_FAIL_ERRORID		"RF Power Amplifier is not on!(%02X)" 
#define C_CLOSE_RF_SUCC				"RF Power Amplifier is off!" 
#define C_CLOSE_RF_FAIL_ERRORID		"RF Power is not off!(%02X)" 
#define C_SET_FREQ_SUCC_VALUE		"Operation Frequency setting is success! The Frequency is %s" 
#define C_SET_FREQ_FAIL_ERRORID		"Operation Frequency setting is failed!(%02X)" 
#define C_QUERY_FREQ_SUCC_HOPPING_VALUE		"Frequency query is success, Operation mode is hoping and the frequency is %s" 
#define C_QUERY_FREQ_SUCC_FIX_VALUE		"Frequency query is success Operation mode is Fixed and the frequency is %s" 
#define C_SET_MEMORY_SUCC_RAM			"Reader Buffer set as RAM!" 
#define C_SET_MEMORY_SUCC_FLASH			"Reader Buffer set as Flash Memory!" 
#define C_SUCCESS						"success" 
#define C_FAIL							"failed" 
#define C_QUERY_MEMORY_SUCC_RAM			"Buffer mode query is success, Buffer mode is RAM!" 
#define C_QUERY_MEMORY_SUCC_FLASH		"Buffer mode query is success, Buffer mode is Flash Memory!" 
#define C_QUERY_MEMORY_FAIL_ERRORID		"Buffer mode query is failed!(%02X)" 
#define C_START_ANT_CYCLE_SUCC			"Start antenna cycling operation mode is success!" 
#define C_START_ANT_CYCLE_FAIL_ERROR	"Start antenna cycling operation mode setting is failed!(%02X)" 
#define C_END_ANT_CYCLE_SUCC			"End antenna cycling operation mode is success!" 
#define C_END_ANT_CYCLE_FAIL_ERROR		"End antenna cycling operation mode failed!(%02X)" 
#define C_SELECT_ANT_NUMBER				"Antenna port is selected as ANT%d!" 
#define C_SELECT_ANT_FAIL_ERRORID		"Antenna selection is failed!(%02X)" 
#define C_QUERY_ANT_NUMBER				"Antenna port is ANT%d!" 
#define C_QUERY_ANT_FAIL_ERRORID		"Antenna port query is failed!(%02X)" 
 
#define C_SET_ANT_QUANTIRY_SUCC_NUMBER	 "Antenna quantity(%d) setting is success!" 
#define C_SET_ANT_QUANTIRY_FAIL_ERRORID	 "Antenna quantity setting is failed! (%02X)" 
 
*/