www.pudn.com > iMx31_WCE600.rar > xldr.bib

; 
; Copyright (c) Microsoft Corporation.  All rights reserved. 
; 
; 
; Use of this source code is subject to the terms of the Microsoft end-user 
; license agreement (EULA) under which you licensed this SOFTWARE PRODUCT. 
; If you did not accept the terms of the EULA, you are not authorized to use 
; this source code. For a copy of the EULA, please see the LICENSE.RTF on your 
; install media. 
; 
;****************************************************************************** 
MEMORY 
 
;   Name     Start     Size      Type 
;   -------  --------  --------  ---- 
;    
    XLDR     00000000  00001800  RAMIMAGE   ; 6K (4K for extra romimage page + 2K actual XLDR code. Comments below) 
    RAM      00001800  0003E000  RAM        ; romimage wants a RAM section even though we will not use it 
                                            ; just specify 256K 
 
CONFIG 
 
    AUTOSIZE=OFF 
    COMPRESSION=OFF 
    PROFILE=OFF 
    KERNELFIXUPS=ON 
 
    ;ROM* creates xldr.nb0 file 
    ;Notes: 
    ; 1) romimage always adds a 4K page to the beginning of file. To get rid of this 4K page 
    ;    we'll specify additional 4K space for RAMIMAGE (above) and then cut it off from 
    ;    xldr.nb0 by specifying romstart at an offset of 4k. 
    ; 2) since RAMIMAGE compiles with range 0x0->0x01800 and we chop off first 4K, 
    ;    and flash the remaining 2K at 0x00 on flash; it means we can't have 
    ;    absolute addressing in XLDR code. Only relative addresses should be used. 
    ; 2) if xldr.nb1 is generated you can safely ignore it if it contains only 
    ;    pTOC and other debugging data since we don't need them. Look at the generated 
    ;    file xldr.map to make sure that your code does not overflow beyond 2k boundary. 
    ; 
    ROMSTART=00001000       ; chop off first 4K specified in RAMIMAGE above. 
    ROMWIDTH=32 
    ROMSIZE=00000800        ; XLDR is 2KB. 
 
 
    ; ROMOFFSET adjusts the .bin file record headers to that they lie in flash  
    ; (this tells the bootloader already on the device to store the image in flash). 
    ; 
    ; 00000000 + AA70000 = AA700000 (virtual cached) = 00000000 (physical) 
    ; (starting address of bootloader in flash as defined in image_cfg.h) 
    ; 
    ROMOFFSET=0x97200000 
 
MODULES 
 
;   Name    Path                                                            Memory Type 
;   ------  ----------------------------------------------                  ----------- 
    nk.exe  $(_TARGETPLATROOT)\target\$(_TGTCPU)\$(WINCEDEBUG)\xldr.exe     XLDR