www.pudn.com > hello_led_0.rar > DM9000A.H
#ifndef __DM9000A_H__
#define __DM9000A_H__
#define IO_addr 0
#define IO_data 1
#define NCR 0x00 /* Network Control Register REG. 00 */
#define NSR 0x01 /* Network Status Register REG. 01 */
#define TCR 0x02 /* Transmit Control Register REG. 02 */
#define RCR 0x05 /* Receive Control Register REG. 05 */
#define ETXCSR 0x30 /* TX early Control Register REG. 30 */
#define MRCMDX 0xF0 /* RX FIFO I/O port command READ for dummy read a byte from RX SRAM */
#define MRCMD 0xF2 /* RX FIFO I/O port command READ from RX SRAM */
#define MWCMD 0xF8 /* TX FIFO I/O port command WRITE into TX FIFO */
#define ISR 0xFE /* NIC Interrupt Status Register REG. FEH */
#define IMR 0xFF /* NIC Interrupt Mask Register REG. FFH */
#define NCR_set 0x00
#define TCR_set 0x00
#define TX_REQUEST 0x01 /* TCR REG. 02 TXREQ Bit [0] = 1 polling Transmit Request command */
#define TCR_long 0x40 /* packet disable TX Jabber Timer */
#define RCR_set 0x30 /* skip CRC_packet and skip LONG_packet */
#define RX_ENABLE 0x01 /* RCR REG. 05 RXEN Bit [0] = 1 to enable RX machine */
#define RCR_long 0x40 /* packet disable RX Watchdog Timer */
#define PASS_MULTICAST 0x08 /* RCR REG. 05 PASS_ALL_MULTICAST Bit [3] = 1: RCR_set value ORed 0x08 */
#define BPTR_set 0x3F /* BPTR REG. 08 RX Back Pressure Threshold: High Water Overflow Threshold setting 3KB and Jam_Pattern_Time = 600 us */
#define FCTR_set 0x5A /* FCTR REG. 09 High/ Low Water Overflow Threshold setting 5KB/ 10KB */
#define RTFCR_set 0x29 /* RTFCR REG. 0AH RX/TX Flow Control Register enable TXPEN + BKPM(TX_Half) + FLCE(RX) */
#define ETXCSR_set 0x83 /* Early Transmit Bit [7] Enable and Threshold 0~3: 12.5%, 25%, 50%, 75% */
#define INTR_set 0x80 /* IMR REG. FFH: PAR +PRM, or 0x83: PAR + PRM + PTM */
#define PAR_set 0x80 /* IMR REG. FFH: PAR only, RX/TX FIFO R/W Pointer Auto Return enable */
#define PHY_reset 0x8000 /* PHY reset: some registers back to default value */
#define PHY_txab 0x05e1 /* set PHY TX advertised ability: Full-capability + Flow-control (if necessary) */
#define PHY_mode 0x3100 /* set PHY media mode: Auto negotiation (AUTO sense) */
#define STD_DELAY 20 /* standard delay 20 us */
#define DMFE_SUCCESS 0
#define DMFE_FAIL 1
#define TRUE 1
#define FALSE 0
#define DM9000_PKT_READY 0x01 /* packets ready to receive */
#define PACKET_MIN_SIZE 0x40 /* Received packet min size */
#define MAX_PACKET_SIZE 1522 /* RX largest legal size packet with fcs & QoS */
#define DM9000_PKT_MAX 3072 /* TX 1 packet max size without 4-byte CRC */
//-------------------------------------------------------------------------
unsigned char ether_addr[6]={ 0x01, 0x60, 0x6E, 0x11, 0x02, 0x0F };
//-------------------------------------------------------------------------
void iow(unsigned int reg, unsigned int data);
unsigned int ior(unsigned int reg);
void phy_write(unsigned int reg, unsigned int value);
/* DM9000_init I/O routine */
unsigned int DM9000_init (void);
/* Transmit One Packet TX I/O routine */
unsigned int TransmitPacket(unsigned char *data_ptr,unsigned int tx_len);
/* Receive One Packet I/O routine */
unsigned int ReceivePacket (unsigned char *data_ptr,unsigned int *rx_len);
//-------------------------------------------------------------------------
#endif